Instruction/ maintenance manual of the product LCD-1700VRQ Tote Vision
Go to page of 21
.
.
17” Quad display LCD monitor ______________________ 1 CHAPT ER 1 I NTRODUCTION BEFORE INSTALLING YO UR MONITOR READ THIS MANUAL COV ER TO COVER. PAY ATTENTION to all WARNING and CAUTIONS DO NOT use computer components not recommend by the manufacture Do not attempt to service the monitor your self.
________________________ 17” Qua d display LCD monitor 2 FACTORY - PRESET MODES Table 1 shows standard video mode setting that have been pre - adjusted at the factory for accurate video display. These setting are stored in the monitor's memory Table 1.
17” Quad display LCD monitor ______________________ 3 S PECIFICATIONS l LCD - 1700VR Q 17” LCD Monitor Overall Dimension (HxWxD): 483 x 354 x 50.3 mm Shipping Weight (G/W): 9 Kg Effective Display area (H/V): 337.92 x 270.34 mm Display colors: 16.7M colors Scan Frequencies: Horizontal 31.
________________________ 17” Qua d display LCD monitor 4 Compatibility: IBM and compatibl e, Apple Macintosh, NEC Environmental Limits: Operating Temp 32 ° to 104 ° F ( 0 ° to 40 ° C ) Storage Temp.
17” Quad display LCD monitor ______________________ 5 Chapter 2 P RODUCT P ACKAGE Open the shipping carton and check the contents. If any items are missing or damaged, contact your dealer immediately. The package should include the following items l 8U 17” Color TF T LCD Monitor l Accessory Box: 1.
________________________ 17” Qua d display LCD monitor 6 FOLLOW THESE STEPS T O INSTALL THE MONITOR 1. Before you connect the cables, make sure that the monitor and the system unit power switches are OFF 2. Plug one end of the 15pin signal cable to the monitor and the other end to the video signal connector at the rear of the system.
17” Quad display LCD monitor ______________________ 7 C ONTROL F UNCTIONS The OSD control functions of 17” Quad display LCD monitor are located on the lower side.
________________________ 17” Qua d display LCD monitor 8 Chapter 3 A DJUSTING THE PC MONITOR The LCD monitor is designed to work with a range of compatible video adapters on the market. Due to the possible deviations between these video adapters, you may make some adjustment to fit the monitor for adapter used.
17” Quad display LCD monitor ______________________ 9 We had two pages OSD screens; the screens are shown in OSD screen 1 and 2, if you choose the source to video not RGB, please see the next chapter.
________________________ 17” Qua d display LCD monitor 10 OSD SCREEN2 1024x768 48KHz 60Hz PREVIOUS PAGE --- Z Brightness -------------- L RED -------------- R GREEN ---------- G BLUE ---------.
17” Quad display LCD monitor ______________________ 11 Adjustment Icon : S Auto - adjustment Automatically adjust the pixel clock, H/V position and fine tune the screen to get bette r visual quality. @ H - position Adjusts the screen's width.
________________________ 17” Qua d display LCD monitor 12 F OSD V - position Change the OSD Vertical Display location in the screen Y Move to the next OSD screen Z Move to the previous OSD screen [ OSD transparency setting To set the OSD display transparency mode.
17” Quad display LCD monitor ______________________ 13 BRIGHTNESS ADJUSTMEN T 1. Use the ∇ & ∆ key to move the 3 to the L icon, then press ﹣ & + to get the best brightness optimization. Note : We provide another easily method to do the brightness adjustment.
________________________ 17” Qua d display LCD monitor 14 HOW TO RESTORE THE P RE - DEFINE VALUE R estore your previous define setting 1. Use the ∇ & ∆ key to move the 3 t o t h e icon, then press “ - ” will automatically load the pre - define value for each item.
17” Quad display LCD monitor ______________________ 15 CHAPTER 4 ADJUSTING THE SECURI TY SCREEN SETTING The LCD monitor is designed to work with a range of compatible video display on the market. Due to the possible deviations between these video source, you may make some adjustment to fit the monitor for video usage.
________________________ 17” Qua d display LCD monitor 16 Security OSD menu setting When your screen is in AV mode, pressing MENU key to enter into OSD set up menu, you will see the following screen.
17” Quad display LCD monitor ______________________ 17 The sub - menu of camera is below CAMERA SETUP CAMERA CAM1 BRIGHTENSS 10 CONTRAST 22 SHARPNESS 55 SAT U 99 SAT V 82 HUE 01 LOAD DEFAULT You can set up each camera brightness, contrast, sharpness, sat U, Sat V and hue setting to the better visual quality.
________________________ 17” Qua d display LCD monitor 18 P r e ss i ng t o l e t sc r een t o d i s p l a y 4 c hanne l quad d i s p l a y . X Recording the screen will always set as quad display, When you playback the screen, we offered one hot key to let user to see the full channel # display.
17” Quad display LCD monitor ______________________ 19 APPENDIX S IGNAL C ONNECTOR P IN - OUT Power Connector Pin 1 Ground Pin 2 +12V output RGB SIGNAL CONNECT OR Pin 1 Analog Red Input Pin 2 Analog.
An important point after buying a device Tote Vision LCD-1700VRQ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tote Vision LCD-1700VRQ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tote Vision LCD-1700VRQ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tote Vision LCD-1700VRQ you will learn all the available features of the product, as well as information on its operation. The information that you get Tote Vision LCD-1700VRQ will certainly help you make a decision on the purchase.
If you already are a holder of Tote Vision LCD-1700VRQ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tote Vision LCD-1700VRQ.
However, one of the most important roles played by the user manual is to help in solving problems with Tote Vision LCD-1700VRQ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tote Vision LCD-1700VRQ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
