Instruction/ maintenance manual of the product DEQ1024 Behringer
Go to page of 14
Users Manual ENGLISH ULTRAGRAPH DIGITAL DEQ1024 Version 1.0 June 2003.
2 ULTRAGRAPH DIGITAL DEQ1024 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 ULTRAGRAPH DIGITAL DEQ1024 DEQ1024 ULTRAGRAPH DIGITAL Digital Stereo 31-Band 24-Bit/96 kHz Equalizer/Feedback Destroyer/Dynamics Processor s Ultra high-resolution processor for all EQ, RTA and dynam.
4 ULTRAGRAPH DIGITAL DEQ1024 TABLE OF CONTENTS 1 . INTRODUCTION ......................................................... 5 1.1 Before you get started ................................................... 5 1. 1. 1 Shipment .............................
5 ULTRAGRAPH DIGITAL DEQ1024 1. INTRODUCTION 1. INTRODUCTION Thank you very much for expressing your confidence in BEHRINGER products by purchasing the ULTRAGRAPH DIGITAL DEQ2496, an extremely high-quality digital equalizer with built-in 24-bit/96 kHz A/D and D/A converte rs, making it an ideal tool for both live and studio applications.
6 ULTRAGRAPH DIGITAL DEQ1024 2. CONTROL ELEMENTS Use the 45-mm EQ faders to increase or decrease any one of the 31 frequency bands. Each fader has its own red LED. Use the FADER RANGE switches to regulate increasing/ decreasing in three different levels: +12/-12 dB (green LED), +6/-6 dB (green LED) and 0/-24 dB (yellow LED).
7 ULTRAGRAPH DIGITAL DEQ1024 2. CONTROL ELEMENTS + Try to orient yourself on a frequency whose signal level lies in the 0 dB to -3 dB range in order to avoid overdriving the equipment connected (e.
8 ULTRAGRAPH DIGITAL DEQ1024 2. CONTROL ELEMENTS Fig. 2.4: Input/output wiring depending on operating mode BAAAAA CAAAAA CBAABA BABAAB T ab. 2.1: Input/output wiring depending on operating mode Fig.
9 ULTRAGRAPH DIGITAL DEQ1024 3. APPLICATIONS The balanced XLR and 1/4" TRS inputs are used for connecting an analog input signal. The analog output signal of the DEQ1024 can be taken by using these balanced XLR and 1/4" TRS connectors. The MAX .
10 ULTRAGRAPH DIGITAL DEQ1024 3.1 Master equalizer in sound reinforcement systems This is surely the most common DEQ1024 application. To achieve optimal results, you should keep in mind the following: Before you begin correcting the frequency response, running your audio program unprocessed first has proved itself useful.
11 ULTRAGRAPH DIGITAL DEQ1024 3.2.1 Priming a monitor system Priming describes the process of detecting and suppressing feedback frequencies. After placing and setting up your microphones and monitor speakers (including amplifiers), you should crank up the aux send controls on all the channels of your mixing console needed for the monitor mix.
12 ULTRAGRAPH DIGITAL DEQ1024 4. INSTALLATION 4.1 Rack mounting The BEHRINGER ULTRAGRAPH DIGITAL requires two height units (2 HU) for being installed into a 19" rack. Please allow at least an extra 4" of space for the connectors on the rear panel.
13 ULTRAGRAPH DIGITAL DEQ1024 5. SPECIFICATIONS 5. SPECIFICATIONS ANALOG INPUTS T ype electronically balanced Connector X LR Impedance 22 k Ω at 1 kHz Max. input leve l +12 or +22 dBu, swi tchable C M R R 80 dB typ. ANALOG OUTPUTS T ype servo-balanced Connector XL R Impedance 100 Ω at 1 kHz Max.
14 ULTRAGRAPH DIGITAL DEQ1024 6. WARRANTY The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any me.
An important point after buying a device Behringer DEQ1024 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer DEQ1024 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer DEQ1024 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer DEQ1024 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer DEQ1024 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer DEQ1024, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer DEQ1024.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer DEQ1024. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer DEQ1024 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
