Instruction/ maintenance manual of the product SD-6980SY Toshiba
Go to page of 76
2005 T oshiba Corporation D VD VIDEO PLA YER SD-6980SY O WNER’S MANU AL C 00873A-SD-6980SY-Cover 8/22/05 4:42 PM Page 3.
ENG-2 Safety Precautions T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE THE COVER(OR BA CK). NO USER-SER VICEABLE P AR TS ARE INSIDE. REFER SER VICING T O QU ALIFIED SER VICE PERSONNEL.
ENG-3 Intr oduction Impor tant Safety Instructions 1) Read these instructions. 2) K eep these instr uctions. 3) Heed all warnings. 4) F ollow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dr y cloth. 7) Do not bloc k any ventilation openings , Install in accordance with the manuf acturer's instr uctions.
ENG-4 Intr oduction Note: • This unit can be used only where the power supply is A C 110~240V , 60/50Hz. It cannot be used elsewhere . Notes on Regional Codes • Most D VD discs ha v e a globe with one or more numbers in it clearly visible on the co v er .
ENG-5 Introduction HANDLING CA UTIONS • Bef ore connecting other components to this play er , be sure to tur n them all off . • Do not mo ve the pla yer while a disc is being pla yed, or the disc ma y be scratched or brok en, and the pla y er’ s internal par ts ma y be damaged.
Install Batteries in the Remote contr ol 1 Open the battery cov er on the back of the remote control. Operating with the remote contr ol P oint the remote control at the remote sensor and press the buttons. Distance : Approx. 7m (23 feet) from the front of the remote sensor .
ENG-7 T able of Contents Introduction Saf ety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Impor tant Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENG-8 General Features Excellent Sound Dolby Digital, a technology de veloped by Dolb y Laboratories, provides crystal clear sound reproduction. Screen Both regular and widescreen(16:9) pictures can be view ed. Slow Motion An impor tant scene can be view ed in slow motion.
ENG-9 Introduction Intr oduction T o ensure proper use of this product, please read this owner’ s manual carefully and retain f or future ref erence. This manual provides inf or mation on the operation and maintenance of your D VD Home Theater System.
ENG-10 T ype of Play able Discs This D VD pla yer is capable of pla ying the follo wing types of discs with the corresponding logos: Disc Markings Region Number Both the D VD pla yer and the discs are coded by region. These regional codes must match in order f or the disc to pla y .
ENG-11 Introduction Fr ont P anel Fr ont P anel Display 1. ON/ST ANDBY( ) Use to turn your play er on and off (standby). 2. PO WER Indicator This indicator will lights up when the power is on. 3. DISC TRA Y Place the disc here. 4. DISPLA Y Operation indicators are displa yed here .
ENG-12 Rear P anel 1. 5.1CH ANALOG A UDIO OUT JACKS - Connect to an amplifier with 5.1ch analog input jacks . 2. DIGIT AL A UDIO OUT JA CKS - Use either an optical or coaxial digital cable to connect to a compatible Dolb y Digital receiver .
ENG-13 Introduction Remote Contr ol 1. OPEN/CLOSE ( ) Button T o open and close the disc tra y . 2. NUMBER Buttons 3. INPUT Button Selects Video input connection in TV mode . 4. D VD Button Press this to operate D VD Pla yer . 5. TV Button Press this to operate TV .
ENG-14 Choosing a Connection The f ollowing sho ws e xamples of connections commonly used to connect the D VD play er with a TV and other components. Before Connecting the D VD Play er - Alwa ys tur n off the D VD pla yer , TV , and other components bef ore you connect or disconnect an y cables .
ENG-15 Connections Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable . - Y ou will enjo y high quality images. S-Video separates the picture element into b lack and white(Y) and colour(C) signals to present clearer images than regular video input mode.
ENG-16 Connection to a TV (Interlace) - Connecting to your TV using Component video cables . - Y ou will enjo y high quality and accurate colour reproduction images. Component video separates the picture element into blac k and white(Y), blue(P B ), red(P R ) signals to present clear and clean images.
ENG-17 Connections Connection to a TV (Progressive) Note - What is "Progressive Scan"? Progressiv e scan has twice as many scanning lines as the interlace output method. Progressiv e scanning method provides better and clearer picture quality .
ENG-18 Connecting to a TV with HDMI Jack 1 Using the HDMI cable , connect the HDMI OUT terminal on the rear of the D VD play er to the HDMI IN terminal of your TV . 2 Press the input selector on your TV remote control until the HDMI signal from the D VD play er appears on your TV screen.
ENG-19 Connections • HDMI (High Definition Multimedia Interface) HDMI is an interf ace to enable the digital tr ansmission of video and audio data with just a single connector . Using HDMI, the D VD pla yer tr ansmits a digital video and audio signal and displa ys a vivid picture on a TV having an HDMI input jac k.
ENG-20 Note - Please turn the volume do wn when y ou turn on the Amplifier . Sudden loud sound ma y cause damage to the speakers and y our ears. - Please set the audio in the menu screen according to the Amplifier . (See pages 60 to 61) - The position of ter minals ma y v ar y depending on the Amplifier .
ENG-21 Connections Note - Please turn the volume do wn when y ou turn on the Amplifier . Sudden loud sound ma y cause damage to the speakers and y our ears. - Please set the audio in the menu screen according to the Amplifier . (See pages 60 to 61) - The position of ter minals ma y v ar y depending on the Amplifier .
ENG-22 Note - Please turn the volume do wn when y ou turn on the Amplifier . Sudden loud sound ma y cause damage to the speakers and y our ears. - Please set the audio in the menu screen according to the Amplifier . (See pages 60 to 63) - The position of ter minals ma y v ar y depending on the Amplifier .
ENG-23 Basic Functions Pla ying a Disc Before Pla y - T ur n on your TV and set it to the correct Video Input on the TV's remote control. - If you connected an e xter nal A udio System, turn on your A udio System and set it to the correct A udio Input.
ENG-24 6 Pausing Pla y Press the PLA Y/P A USE () or STEP button on the remote control during play . ▼ Screen pauses, no sound. T o resume, press the PLA Y/P A USE ( ) button once again. Note If the pla yer is left f or about 5 minutes in pause mode, it will stop .
ENG-25 Basic Functions Using the Sear c h and Skip Functions During play , you can search quic kly through a chapter or trac k, and use the skip function to jump to the ne xt selection. Searc hing thr ough a Chapter or T rack During play , press the SEARCH (o r ) button on the remote control for more than 1 second.
ENG-26 Using the Displa y Function When Playing a D VD/VCD/CD/MPEG4 1 During play , press the DISPLA Y button on the remote control. ▼ Y ou can select Inf o in the function menu b y pressing the MENU button. 2 Press the … / † buttons to select the desired item.
ENG-27 Basic Functions 4 T o make the screen disappear , press the DISPLA Y button again. Note T o access the desired title when there is more than one in the disc. F or e xample, if there is more than one mo vie on a D VD , each movie will be identified.
ENG-28 Using the Disc and Title Menu Using the Disc Menu (D VD) 1 During the playbac k of a D VD disc, press the SETUP button on the remote control. 2 Press the … / † buttons to select Disc Menu , then press the √ or ENTER button. Note - Depending on a disc, the Disc Menu ma y not wor k.
ENG-29 Basic Functions Using the Function Menu Using the Function Menu (D VD/VCD) 1 Press the SETUP button during playbac k. 2 Press the … / † buttons to select Function , then press the √ or ENTER button.
ENG-30 Repeat Pla y Repeat the current trac k, chapter , title, a chosen section (A-B), or all of the disc. When playing a D VD/VCD/CD 1 Press the REPEA T b utton on the remote control. Repeat screen appears. 2 Press the œ / √ buttons to select Chapter , Title or A-B , then press the ENTER button.
ENG-31 Basic Functions Slow Repeat Pla y This f eature allows y ou slowly to repeat scenes containing spor ts, dancing, musical instruments being pla yed etc., so y ou can study them more closely . When playing a D VD/VCD 1 During play , press the PLA Y/P A USE ( ) button.
ENG-32 Pr ogram Pla y & Random Play Program Pla y (CD) Program Pla y allows you to select the order in which y ou want trac ks to pla y . 1 During play , press the PROGRAM b utton. Random Play (CD) Random Pla y pla ys a disc's trac ks in random order .
ENG-33 Adv anced Functions Selecting the A udio Language Y ou can select a desired audio language quic kly and easily with the A UDIO button. Using the A UDIO button (D VD/VCD/CD) 1 Press the A UDIO button. The Audio changes when the button is pressed repeatedly .
ENG-34 Selecting the Subtitle Language Y ou can select a desired subtitle quic kly and easily with the SUBTITLE b utton. Using the SUBTITLE b utton (D VD/MPEG4) 1 Press the SUBTITLE button. The subtitle changes when the button is pressed repeatedly . The subtitle languages are represented by abbre viations.
ENG-35 Adv anced Functions Changing the Camera Angle When a D VD contains multiple angles of a particular scene, you can use the ANGLE function. Using the Angle Function (D VD) If the disc contains multiple angles , the ANGLE appears on the screen. 1 During play or pause mode, press the SETUP button on the remote control.
ENG-36 Using the Instant Repla y/Skip Function Using the Instant Repla y function (D VD) If you miss a scene , y ou can see it again using this function. Press the REPLA Y button. - The current scene mov es backw ard about 10 seconds, and pla ys back.
ENG-37 Adv anced Functions Using the Marker Function This f eature lets you bookmark sections of a D VD or VCD (Menu Off mode) so y ou can quickly find them at a later time. Using the Marker Function (D VD/VCD) 1 During play , press the MARKER button on the remote control.
ENG-38 Recalling a Marked Scene 1 During play , press the MARKER button on the remote control. 3 Press the PLA Y/P A USE ( ) button to skip to the marked scene. 2 Press the œ / √ buttons to select a marked scene. Clearing a Marker 1 During play , press the MARKER button on the remote control.
ENG-39 Adv anced Functions Using the Zoom Function Using the Zoom Function (D VD/VCD) 1 During play , press the ZOOM button on the remote control. Using the SETUP button. During play or pause mode, press the SETUP button on the remote control. Press the … … / † † buttons to select Zoom , then press the √ or ENTER button.
ENG-40 3 Depending on the file type stored on the Memory card, audio files will be play ed the same way as MP3 files and picture files will be play ed the same way as Picture CD’ s files. (See pages 48 to 54) 1 Inser t a Memory Card. 2 Press the D VD/CARD button on the remote control.
ENG-41 Adv anced Functions 5 T o make the screen disappear , press the DISPLA Y button again. D VD A UDIO Playbac k 1 Open the disc tra y . Place the D VD A UDIO disc on the tray . - Place the D VD A UDIO disc with the labeled side up. Close the tra y .
ENG-42 Note Most D VD A UDIO discs are recorded in Groups. Y ou can change Groups with this Function. Bonus Group pla yback. Some D VD A UDIO discs hav e Bonus groups . If you want to pla y a Bonus group , you must enter the Bonus Group code. The code is usually on the D VD A UDIO disc case.
ENG-43 Adv anced Functions REPEA T Play 1 Press the REPEA T b utton on the remote control. Repeat screen appears. 2 Press the œ / √ buttons to select T rack or Gr oup , then press the ENTER button. ▼ T rack ( ): repeats the title that is playing.
ENG-44 Super A udio CD Playbac k 1 Open the disc tra y . Place the Super Audio CD disc on the tra y . - Place the Super A udio CD disc with the labelled side up . Close the tra y . - The tray closes and y ou should get a screen. Super A udio CD Clips Men u On Play Function 1 Use the … / † buttons to select a music title.
ENG-45 Adv anced Functions 5 T o make the screen disappear , press the DISPLA Y button again. Super A udio CD Clips Menu Off Pla y Function 1 In Stop mode, press the DISC MENU button until the Clips menu is off . 2 During play , press the DISPLA Y button on the remote control.
ENG-46 Note (SA CD) T o access the desired T rack when there is more than one in the disc. (SA CD) Allows pla yback from a desired time by using the n umber buttons . (SA CD) If you w ant to change the 2 channel or multi-channel mode in pla y or stop mode, press A UDIO button.
ENG-47 Adv anced Functions Clips Menu f or MP3/JPEG/MPEG4 Discs with MP3/JPEG/MPEG4 contain individual songs and/or pictures that can be organized into f olders as shown below . They are similar to ho w y ou use your computer to put files into diff erent f olders.
ENG-48 MP3 Pla ybac k 1 Open the disc tra y . Place the disc on the tra y . Close the tra y . 2 Press the … … / † † or œ / √ buttons to select a song file. Press ENTER to begin playbac k of the song file. ROOT WMA JPEG MP3 MPEG4 ROOT Repeat/Random playbac k 1 Press the REPEA T b utton to change the playbac k mode.
ENG-49 Adv anced Functions MP3 file When you record MP3 file on CD-R/Memory Card, please refer to the f ollowing. - Y our MP3 files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 file are compatible with Microsoft's DOS and Windows , and with Apple's Mac.
ENG-50 MPEG4 Pla ybac k MPEG4 Play Function A VI files are used to contain the audio and video data. Only A VI f or mat files with the “ .a vi ” extensions can be pla yed.
ENG-51 Adv anced Functions Note - Some MPEG4 files created on a personal computer may not be pla yed properly . That is wh y Codec T ype, V ersion and Higher resolution ov er specification is not suppor ted. - This unit suppor ts CD-R/RW written in MPEG4 in accordance with the “ ISO9660 f ormat ” .
ENG-52 Picture CD Pla ybac k 1 Select the desired folder . Note - If no button on the remote control is pressed in about 10 seconds, the menu will disappear . - Press the ST OP button to return to the clips menu. - When playing a K odak Picture CD , the unit displa ys the Photo directly , not the clips menu.
ENG-53 Adv anced Functions Picture CD Pla ybac k for HD-JPEG Must connect to HDMI. Resolution should be 720p or 1080i, and HD-JPEG should be in HD mode.
ENG-54 JPEG Discs When playing a CD-R/Memory Card/Picture CD - Only files with the “ .jpg ” and “ .JPG ” extensions can be pla yed. - If the disc is not closed, it will take longer time to start play and not all of the recorded files ma y be pla yed.
ENG-55 Changing Setup Menu Using the Setup Menu The Setup menu lets y ou customize y our D VD play er by allowing y ou to select v arious language pref erences, set up a parental le vel or e ven adjust the pla yer to the type of tele vision screen you hav e.
ENG-56 Setting Up the Language Features If you set the pla yer menu, disc men u, audio and subtitle language in adv ance, the y will come up automatically e v er y time y ou watch a mo vie. Using the Play er Menu Langua ge 1 With the unit in Stop mode, press the SETUP button.
ENG-57 Changing Setup Menu Using the Disc Menu Langua ge This function changes the te xt language only on the disc menu screens . 4 Press the … … / † † buttons to select Disc Menu , then press the √ or ENTER button. 5 Press the … … / † † buttons to select the desired language, then press the √ or ENTER button.
ENG-58 Using the A udio Language 4 Press the … … / † † buttons to select Audio , then press the √ or ENTER button. 5 Press the … … / † † buttons to select the desired language, then press the √ or ENTER button.
ENG-59 Changing Setup Menu Using the Subtitle Language 4 Press the … … / † † buttons to select Subtitle , then press the √ or ENTER button. 5 Press the … … / † † buttons to select the desired language, then press the √ or ENTER button.
ENG-60 Setting Up the A udio Options A udio Options allows y ou to setup the audio device and sound status settings depending on the audio system in use. 3 Press the … … / † † buttons to select Audio Setup , then press the √ or ENTER button.
ENG-61 Changing Setup Menu Note • T o exit the setup menu, press the SETUP b utton. • D VD-A UDIO - Outputs 2 channel digital audio only . - Some D VD-A UDIO discs do not down-mix, so they will not output 2 channel digital audio . - MUL TI channel D VD-A UDIO discs playbac k through the analog outputs.
ENG-62 Surround Sound Speaker Setup 3 Press the … … / † † buttons to select Audio Setup , then press the √ or ENTER button. 4 Press the … … / † † buttons to select Speaker Setup , then press the √ or ENTER button. 1 With the unit in Stop mode, press the SETUP button.
ENG-63 Changing Setup Menu The def ault settings : FRONT L, R (Small), CENTER (Small), SURROUND SL, SR (Small). Select the size of the speak ers to be connected. Œ F ront (FL, FR) - Large: Nor mally select this. - Small: When the sound distor ts or the surround sound eff ects are difficult to hear , select this.
ENG-64 Setting Up the Displa y Options Displa y options enable y ou to set various video functions of the play er . 3 Press the … … / † † buttons to select Display Setup , then press the √ or ENTER button. 4 Press the … … / † † buttons to select the desired item, then press the √ or ENTER button.
ENG-65 Changing Setup Menu Œ TV Aspect Depending on the type of tele vision you ha ve, you ma y want to adjust the screen setting (aspect ratio). - 4:3 Letter Bo x : Select when you w ant to see the total 16:9 ratio screen D VD supplies, e ven though y ou hav e a TV with a 4:3 ratio screen.
ENG-66 Ø HDMI This setting can only be used when the unit is connected by HDMI to Displa y devices (TV , Projector , etc.), otherwise the HDMI setting cannot be selected.
ENG-67 Changing Setup Menu Setting Up the P arental Control The P arental Control function works in conjunction with D VDs that hav e been assigned a rating, which helps you control the types of D VDs that your f amily watches. There are up to 8 rating le vels on a disc.
ENG-68 Setting Up the Rating Level 2 Press the … … / † † buttons to select Parental Setup , then press the √ or ENTER button. 3 Enter your pass word. 4 Press the … … / † † buttons to select Rating Level , then press the √ or ENTER button.
ENG-69 Changing Setup Menu Changing the P assw ord 3 Press the … … / † † buttons to select Parental Setup , then press the √ or ENTER button. The Enter P ass word screen appears. Enter your pass word. 4 Press the … … / † † button to select Change Pass wor d , then press the √ or ENTER button.
ENG-70 Reference Setting Control Codes 1. Press TV to set the remote control operating your TV . 2. While holding down PROGRAM b utton, enter the four diglts of y our TV ’ s brand code (listed right) using number b uttons.
ENG-71 Reference Note • Some TV ’ s may not respond to all the oper ations abov e, or may not be operated at all with this remote control. In this case, operate y our TV with its own remote control. • F or some brands, se v eral control codes (brand codes) are allocated.
ENG-72 Reference T roubleshooting Bef ore requesting ser vice (troub leshooting), please check the f ollowing. No operations can be performed with the remote control. The screen ratio cannot be changed. No audio . Play mode diff ers from the Setup Menu selection.
ENG-73 Reference Reference No HDMI output. HDMI output jitters. No Component video outputs in JPEG playbac k. Abnormal HDMI output screen. • Check the Video output is HDMI enabled. • Check the connection between the TV and the HDMI jack of D VD pla yer .
ENG-74 Reference Specifications P ower Requirements P ower Consumption Weight Dimensions Operating T emperature Range Operating Humidity Range DV D (DIGIT AL VERSA TILE DISC) CD : 3 1/2 " (COMP ACT DISC) CD : 8Cm (COMP ACT DISC) VCD : 3 1/2 " Composite Video Component Video S-Video HDMI 2 Channel 5.
ENG-75 Reference Memo 00873A-SD-6980SY-2 8/22/05 4:40 PM Page 75.
AK68-00873A-00 Smar tMedia is a trademark of T oshiba Cor p . T oshiba is an authorized licensee of the Compact Flash® registered trademark. SD is a trademark of SD Card Association. MMC and MultiMedia Card are trademarks of Infineon T echnologies A G and licensed to MMCA (MultiMediaCard Association).
An important point after buying a device Toshiba SD-6980SY (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba SD-6980SY yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba SD-6980SY - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba SD-6980SY you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba SD-6980SY will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba SD-6980SY, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba SD-6980SY.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba SD-6980SY. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba SD-6980SY along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center