Instruction/ maintenance manual of the product BX3000T Behringer
Go to page of 11
Version 1.0 January 2003 User’s Manual ENGLISH ULTRABASS BX3000T.
2 ULTRABASS BX3000T This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure—voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 ULTRABASS BX3000T BX3000T BX3000T BX3000T BX3000T BX3000T ULTRABASS 300-Watt bass amplifier with DYNAMIZER technology V Extremely powerful 300-Watt RMS bass amp head V Patented DYNAMIZER technology .
4 ULTRABASS BX3000T TABLE OF CONTENTS 1 . INTRODUCTION ......................................................... 5 1.1 The design concept ........................................................ 5 1.1.1 Patented DYNAMIZER technology ..................
5 ULTRABASS BX3000T 1. INTRODUCTION 1. INTRODUCTION Congratulations! With the BX3000T you have acquired a pro- level amplifier from our BX bass amplifier series. This revolutionary bass amplifier top has many of the features of our successful BX1200. Our top goal when designing the BX3000T was to set new standards.
6 ULTRABASS BX3000T 2. CONTROL ELEMENTS 2. CONTROL ELEMENTS 2.1 Front panel Fig. 2.1: BX3000T front panel (section 1) The LEVEL VU meter reads the level that is applied to the preamp circuitry of the BX3000T. If the GAIN control is set fully counterclockwise, the VU meter reads the input level only.
7 ULTRABASS BX3000T 3. WIRING EXAMPLES 2.2 Rear panel.
8 ULTRABASS BX3000T 4. SHAPE FUNCTION If you own a tuner that is able to loop through and mute the signal, we recommend connecting it to the effects loop and .
9 ULTRABASS BX3000T 5. ULTRABASS FUNCTION Extremely low bass sounds playing one octave below the lowest available bass guitar frequency are quite trendy in current music productions. Often, you can do this in studios only, because most bass amplifiers have no sub-harmonics function.
10 ULTRABASS BX3000T 7. SPECIFICATIONS 7. SPECIFICATIONS AUDIO INPUTS Active instrument input 1/4" mono jack, unbalanced Input impedance approx. 220 k Ω unbalanced Passive instrument input 1/4" mono jack, unbalanced Input impedance approx.
11 ULTRABASS BX3000T 8. WARRANTY The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, elec.
An important point after buying a device Behringer BX3000T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer BX3000T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer BX3000T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer BX3000T you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer BX3000T will certainly help you make a decision on the purchase.
If you already are a holder of Behringer BX3000T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer BX3000T.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer BX3000T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer BX3000T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
