Instruction/ maintenance manual of the product BCF2000-WH Behringer
Go to page of 24
Version 1 2007-06 Users Manual B-CONTROL FADER BCF2000-WH.
2 B-CONTROL FADER BCF2000-WH IMPORTANT SAFETY PRECAUTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
3 B-CONTROL FADER BCF2000-WH BCF2000-WH B-CONTROL FADER Total Recall USB/MIDI Controller Desk with 8 Motorized Faders s Unique, total recall cascadable desktop MIDI controller with analog feel and an .
4 B-CONTROL FADER BCF2000-WH TABLE OF CONTENTS 1. INTRODUCTION ........................................................ 5 1.1 Before you get st arte d .................................................... 5 1.1.1 Shipment ..............................
5 B-CONTROL FADER BCF2000-WH 1. INTRODUCTION Thank you very much for expressing your confidence in BEHRINGER products by purchasing the B-CONTROL BCF2000-WH. The B-CONTROL is an extremely flexible control surface suitable for a wide array of applications.
6 B-CONTROL FADER BCF2000-WH Example: On a software synthesizer, you want to control filter frequency, filter resonance and volume using the MIDI controllers 5, 6 and 7.
7 B-CONTROL FADER BCF2000-WH + A note command can only be assigned to keys, footswitches and push functions of the encoder. Control Change (CC): Control Change Messages are some of the most powerful MIDI messages. Using them, a vast number of parameters and functions can be recalled and automated.
8 B-CONTROL FADER BCF2000-WH Use the POWER switch to switch on the B-CONTROL. Before connecting the B-CONTROL to the power mains, ensure that the POWER switch is in OFF position. To disconnect the unit from the mains network, pull the plug from the socket.
9 B-CONTROL FADER BCF2000-WH 4. OPERATION 4.1 The operating modes Depending on how you want to use your B-CONTROL, you should first select an operating mode. You can use it as a pure USB controller for your computer applications (software mixers, sequencers, soft synths, VST- effects etc.
10 B-CONTROL FADER BCF2000-WH USB-Mode U-2: Fig. 4.2: Routing and use in USB mode 2 Your B-CONTROL sends MIDI data to the computer and receives parameter feedback, provided that the software you are controlling supports this function. MIDI IN and OUT A are available as a 16- channel MIDI interface for your computer.
11 B-CONTROL FADER BCF2000-WH USB-Mode U-4 (expanded): 4. OPERATION Fig. 4.4: Routing and use in USB mode 4 This operating mode should be selected if you want to couple two B-CONTROLs to control your software using both B-CONTROLS through a common USB port.
12 B-CONTROL FADER BCF2000-WH 4.1.2 Stand-alone modes The stand-alone modes come into play when the B-CONTROL is not used as a USB-controller for controlling computer applications but as a pure MIDI controller.
13 B-CONTROL FADER BCF2000-WH St and Alone-Mode S-3: Fig. 4.7: Routing and use in stand-alone mode 3 In this mode, MIDI data from the B-CONTROL is mixed with the data coming in at the MIDI input (merge function), but is exported exclusively on output A.
14 B-CONTROL FADER BCF2000-WH Parameter feedback is enabled in all stand-alone modes. Other stand-alone modes may cause undesirable MIDI loops. In stand- alone mode 3, the control data of your B-CONTROL is routed to the MIDI output B without the merge function.
15 B-CONTROL FADER BCF2000-WH 4.3.2 Programming in EDIT mode Various types of MIDI commands (Pitchbend, After Touch, MMC etc.) are assigned to the individual control elements in EDIT mode. s To activate the EDIT mode, press and hold the EDIT button and operate a control element.
16 B-CONTROL FADER BCF2000-WH 4. OPERATION T able 4.2: Assignment of the push encoders in EDIT mode (SWITCH types) T able explanation: All settings in the EDIT mode are made by turning the push encoders. Pressing the push encoder displays its current value.
17 B-CONTROL FADER BCF2000-WH LED display of the push encoders: OFF The LED circle remains off. 1d (1 digit): Only one LED lights up (standard setting). 1d- The LED circle operates similar to 1d, but when the value is 0, no LED lights up. 2d The display of the LED circles occurs in two stages.
18 B-CONTROL FADER BCF2000-WH Pitch Bend: Pitch bend is assignable to only one CONTINUOUS element. Since this is a type of command with its own status byte, selecting a MIDI channel (Encoder 2) and Range (Encoder 4) is sufficient. A fter T ouch: Normally, ALL is selected here.
19 B-CONTROL FADER BCF2000-WH 4.6 The Emulation Modes The BEHRINGER B-CONTROL is the i deal supplement to many sequencers and recording software. It off er s an int u itive und musical operation of the most frequently used control elements. This chapter outlines the connection and configuration of the B-CONTROL and your computer.
20 B-CONTROL FADER BCF2000-WH s Press the PRESET key while the EDIT key is kept pressed. s If you want to cancel the dump, press the EXIT key. + Snapshot Send and Single Preset Dump differ in t.
21 B-CONTROL FADER BCF2000-WH 6. SPECIFICATIONS T able 5.2: GS/XG Parameter Main Controls 0XVL FDO 1RWH 0, ', 1RWH1XP EHU C-2 0 C#-2/Db-2 1 D-2 2 D#-2/Eb-2 3 E-2 4 F-2 5 F#-2/Gb-2 6 G-2 7 G#-2/Ab-2 8 A-2 9 A#-2/Bb- 2 10 B-2 11 C-1 12 C0 24 C1 36 C2 48 C3 (Clef C) 60 (Yam aha-Convention) C4 72 C5 84 C6 96 C7 108 C8 120 G8 127 T able 5.
22 B-CONTROL FADER BCF2000-WH 7. WARRANTY 7. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyers statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
23 B-CONTROL FADER BCF2000-WH FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION Responsible party name: BEHRINGER USA, Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
24 B-CONTROL FADER BCF2000-WH.
An important point after buying a device Behringer BCF2000-WH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer BCF2000-WH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer BCF2000-WH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer BCF2000-WH you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer BCF2000-WH will certainly help you make a decision on the purchase.
If you already are a holder of Behringer BCF2000-WH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer BCF2000-WH.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer BCF2000-WH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer BCF2000-WH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center