Instruction/ maintenance manual of the product 1202FX Behringer
Go to page of 13
Version 1.0 January 2006 Users Manual XENYX 1002FX/1202FX.
2 XENYX 1002FX/1202FX This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 XENYX 1002FX/1202FX TABLE OF CONTENTS 1 . INTRODUCTION ......................................................... 4 1.1 General mixing console functions .................................. 4 1.2 The users manual ....................................
4 XENYX 1002FX/1202FX 1. INTRODUCTION Congratulations! In purchasing our XENYX 1002FX/1202FX you have acquired a mixing console whose small size belies its incredible versatility and audio performance.
5 XENYX 1002FX/1202FX 2. CONTROL ELEMENTS AND CONNECTORS 1.3 Before you get started 1.3.1 Shipment Your mixing console was carefully packed in the factory to guarantee safe transport. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage that may have occurred during transit.
6 XENYX 1002FX/1202FX CLIP The CLIP -LEDs of the mono channels illuminate when the input signal is driven too high, which could cause distortion. If this happens, use the TRIM control to reduce the preamp level until the LED does not light anymore.
7 XENYX 1002FX/1202FX 2.3 Connector array of the main section.
8 XENYX 1002FX/1202FX LEVEL SETTING: To correctly set the gains of the channels, first set the LEVEL controls of the input channels to their center positions. Then use the TRIM controls to increase the input amplification until signal peaks show 0 dB on the level meter.
9 XENYX 1002FX/1202FX 3. APPLICATIONS 3. APPLICATIONS 3.1 Recording studio Fig. 3.1: The 1002FX in a recording studio Even though most of the tasks in a studio can nowadays be accomplished using a com.
10 XENYX 1002FX/1202FX.
11 XENYX 1002FX/1202FX.
12 XENYX 1002FX/1202FX BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
13 XENYX 1002FX/1202FX 6. WARRANTY 6. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyers statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
An important point after buying a device Behringer 1202FX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer 1202FX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer 1202FX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer 1202FX you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer 1202FX will certainly help you make a decision on the purchase.
If you already are a holder of Behringer 1202FX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer 1202FX.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer 1202FX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer 1202FX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
