Instruction/ maintenance manual of the product 15VL33 Toshiba
Go to page of 27
15VL 33 Owner's manua l Be d ienungsan l eitun g Manue l d e l 'uti l isateu r Ge b rui k saanvijzin g.
List of contents 1 Special features ..............................................................2 Safety instructions .........................................................3 Getting started ........................................................
T elevision Thank you for buying this television which is designed to give you many years of satisfactory service. Y ou may already be familiar with using a television but do please take time to read these instructions.
3 Safety is Important Y our safety and the safety of others is important. Please, therefore, ensure you read the Safety instructions before y ou operate this television. Safety instructions Read all the safety instructions before first use of your TV.
Getting started R emove your T elevision carefully from the bo x. Y ou may wish to Please Note When not in use disconnect the plug from the mains power supply . Switching the TV on for the first time To install your TV, please read the sections “TV controls” and “ Tuning the television”.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Stand-by Power on / off Remote control Menu button Volume up Volume down Program up Program down Speaker Audio RCA (R) 11.
6 Remote control External connections table Picture tube size/type 15” 4:3 AV1 Scart Headphone socket Audio/Video RCA S-Video socket Back audio out STD.
Using the TV Turning on for the first time and Tuning TV controls Stand-By mode 7 Please Note: If you will not use your TV for a long time, do not leave it on Stand-By mode, instead switch it off from the power button on the front panel of the TV set.
8 Press the Mute button again to r estor e the sound. The symbol will disappear . Pr essing Volume up buttons will also restore the sound. But pressing the Volume down button will decrease the volume without restoring. PP P ersonal preference. P ress the PP button to revert to the default settings for the TV .
9 When you are sure the aerial is connected properly press the OK button. Autoprogam will start. Use the Program down button to select AUTOPROGRAM and the OK button. A list of countries will appear . Select the desired country using Program and Volume buttons.
10 Tuning with channel numbers Enter the SETUP menu by pressing the blue button. To exit the SETUP menu press the TV/TX button. Use the Program down button to select PROGRAM NUMBER. U se the V olume up/down or numeric buttons to select the desired programme number .
Program organising Once you have tuned in all the channels you want, you can change their programme number , if required, and name them. select PROGRAM TABLE and press the OK button or pr ess directly the Y ellow button.
12 V olume Sets default volume using the Volume up and down buttons. To save your settings, select STORE and press the OK button. will be displayed. Press the Menu button to go back to the previous menu. Balance S ets the sound balance To save your settings, select STORE and press the OK button.
13 U se the V olume up button to select the KHz column you want to change. Equalizer In this menu there are a series of preset equalizer settings for different types To access the 5 band equalizer menu press Volume up or down button and press OK on the Equalizer line.
14 Features Menu (Purple button) To select Features menu press the menu button and using the Program up and down buttons select Features . You can also select the Features menu directly by pressing the purple button on the remote control.
15 Language: You can select one of the 16 languages by pressing OK button in the language selection. Timer: Use Program up and down buttons to select Timer in the features menu. Using the Timer fuction, you can switch to a specific programme at a pre- programmed time or you can turn your TV off at the time you want your TV to be turned off.
16 T eletext is an information system that displays text on your TV screen. Using the teletext control buttons you can view pages of information that are listed in the teletext index. No on screen display is available in text mode. The contrast, brightness and colour cannot be changed but the volume control is still available.
17 Page Stop If the page of text you have selected contains sub pages, these sub pages will automatically be displayed in order with a delay to allow you to read the page. To stop the move to the next sub page press the STOP button. STOP will appear in the top left hand corner .
18 Y ou can connect a wide range of audio and video equipment to your TV . Connecting e xternal equipment Connecting a video recorder Plug one end of the SCAR T lead (not supplied) into the back of the video recorder and the other end into one of the SCAR T sockets on the back of the TV .
19 Plug a coaxial plug into the RF out socket on the rear of the video recorder and plug the other end into the aerial socket of the TV . S witch on the video recor der and the TV . If your video recorder has a test signal, switch it on. (Refer to the video recorder user guide).
20 Connecting a DVD player Via SCART M ake sure the TV and DVD player ar e both switched off. P lug one end of the SCAR T lead (not supplied) into the back of the DVD player and the other end into the SCAR T socket on the back of the TV . S witch on the D VD and the TV .
21 Connecting a decoder Via SCART M ake sur e the TV and decoder are both switched off. P lug one end of the SCAR T lead (not supplied) into the back of the decoder and the other end into the SCAR T on the back of the TV . S witch on the decoder and the TV .
22 To browse in the menus, you may use the “ PR “/“ PR “ buttons and Vol+ or Vol- buttons to select the type of adjustment you wish to make. Once you make your selection, you may set the desired adjustment value using the “ PR “/“ PR “ buttons.
23 AUTO CONFIG : Allows the entry of optimum geometrical adjustments based on the input mode INFORMATION : Displays the input mode information on the screen. MISCELLANEOUS You may enter the factory default settings, Menu position and duration on the screen, resolution settings etc.
24 Connecting TV with video and satellite/digital receiver Connecting TV with camcorder Arial in Arial out TV Scart socket Video Scart socket Arial in Arial out Scart socket Arial socket Scart 1 Satel.
25 Help and service tips The TV does not work Make sure it is plugged into the mains supply and switched on. No sound • Is the sound muted? Press the Mute button.
26 General technical specifications Power Supply DC: ................................................... 12V-5A Number of preset programmes ......... 10 0 RF Aerial input .................................... 75 ohm (unbalanced) Sound Systems..........
An important point after buying a device Toshiba 15VL33 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba 15VL33 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba 15VL33 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba 15VL33 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba 15VL33 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba 15VL33, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba 15VL33.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba 15VL33. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba 15VL33 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
