Instruction/ maintenance manual of the product 7202 Toro
Go to page of 4
Customer Service Bulletin Commercial Business Group Workman ® 3200 & 4200 Series Vehicles Model/Serial Range: Model Number: Serial Numbers: 07200 30101 - 79999 07202 50101 - 79999 07216 50101 - 79999 Subject: Fuel from C arburetor may Flood Crankcase.
Fuel Return Line (93-2298) Workman ® 3200 & 4200 Series Relocating Fuel System Return Line - Carburetor Cleaning Relocating the Fuel System Return Line 1. Disconnect negative battery cable from machine. 2. Drain fuel from fuel tank into an approved gasoline container.
Mitsubishi 3G83 Carburetor Cleaning Instructions Remove the carburetor from the machine. Disassemble the carburetor and thoroughly clean out the Fuel Inlet System including the Fuel Inlet Chamber , Inlet Screen , Main Jet Holder Assembly , Float Chamber Cover Assembly, Float, Needle Valve and Seat.
Carburetor Passages Clean out the carburetor passages by using compressed air through an air gun as illustrated. The air gun will provide a suction that will pull debris out of the passages instead of forcing the debris deeper into the carburetor.
An important point after buying a device Toro 7202 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toro 7202 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toro 7202 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toro 7202 you will learn all the available features of the product, as well as information on its operation. The information that you get Toro 7202 will certainly help you make a decision on the purchase.
If you already are a holder of Toro 7202, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toro 7202.
However, one of the most important roles played by the user manual is to help in solving problems with Toro 7202. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toro 7202 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
