Instruction/ maintenance manual of the product FP-11 Telex
Go to page of 2
FP-1 1 & ANT -FP Flat Panel Directional Antenna & Dual Directional Antenna The FP-1 1 and ANT -FP are at panel directional antennas. They are ideally suited for IEEE 802.1 1b and 802.1 1g wireless Local Area Networks (LAN’ s). Both panel antennas are for indoor and outdoor applications.
FP-1 1 & ANT -FP Specications Electrical Specications Frequency 2400-2500 MHz Horizontal Beam Width FP-1 1: 30° ANT -FP: 60° V ertical Beam Width 30° Impedance 50 Ohm VSWR < 1.
An important point after buying a device Telex FP-11 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Telex FP-11 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Telex FP-11 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Telex FP-11 you will learn all the available features of the product, as well as information on its operation. The information that you get Telex FP-11 will certainly help you make a decision on the purchase.
If you already are a holder of Telex FP-11, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Telex FP-11.
However, one of the most important roles played by the user manual is to help in solving problems with Telex FP-11. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Telex FP-11 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
