Instruction/ maintenance manual of the product SIP ND2100 Teledex
Go to page of 10
WHEN USING YOUR TELEPHONE EQUIPMENT , BASIC SAFETY PRECAUTIONS SHOULD AL WA YS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. READ AND UNDERST AND ALL INSTRUCTIONS. 2. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT .
1. Introduction to the T eledex iPhone SIP ND2100 series IP phone 3 1.1 Definitions, acronyms and abbreviations 3 1.2 The SIP ND2100 Series works like a telephone 3 1.3 The network 3 1.4 The IP-PBX 3 1.5 The network system administrator 3 2. Installing the SIP ND2100 series IP phone 3 2.
1. Introduction to the T eledex iPhone SIP ND2100 Series IP Phone The T ele dex iP hone SI P ND21 00 seri es IP phone i s a SIP-co mpliant network terminal. Instead of using standard analog or digital telephone lines, it connects to the network in the same manner as computers and printers do.
2.5 Connecting the SIP ND2100 Series to the network W ARNING! Risk of electrical shock! Dangerous voltages may be present on the terminals of the network patch cable after it is plugged into the network wall jack. Connect the patch cable to the base first, then to the network wall jack.
Figure 2 shows the welcome page of the configuration portal. The phone can be configured through the main menu provided by this portal. NOTE: Except for upgrading the software online (decribed in subsection 3.2.7), the configuration for the SIP ND2100 series will not be activated until the phone has been reset.
Fig 5: Call Feature Configuration 3.2.5 Upgrade the Phone’ s Firmware (Fig.6) T o update the phone’ s firmware through the configuration portal, click “Online Upgrade” on the left menu. There are three update options from which to choose: 1.
4.1.6 Adjusting the Handset V olume Activate the handset by picking it up. With the handset active, press the up or down arrow key to raise or lower handset volume to the desired level. 4.2 Placing a Phone Call There are various ways of initiating a phone call: 1.
5.3.1 Programming the Memory Dialing Keys Thr ough the Concealed STORE Key The speed dial keys can be programmed not only through the configuration portal (as described by subsection 3.2.3) but also through the concealed STORE key . The STORE key is concealed to deter unauthorized tampering.
7. Appendix A – European Requir ements This product complies with the following CE requirements: 89/336/EEC EN 55024 EN 55022 EN 60950 (CB SCHEME) 8.
10 Fig 1: SIP ND2100 Series Diagram 10/100 Port (In) Pause (Recessed) Switched Port (Alternate location; may vary by manufacture date) Store (Recessed) V olume Up/Down Hold Messages Redial Mute Speake.
An important point after buying a device Teledex SIP ND2100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teledex SIP ND2100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teledex SIP ND2100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teledex SIP ND2100 you will learn all the available features of the product, as well as information on its operation. The information that you get Teledex SIP ND2100 will certainly help you make a decision on the purchase.
If you already are a holder of Teledex SIP ND2100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teledex SIP ND2100.
However, one of the most important roles played by the user manual is to help in solving problems with Teledex SIP ND2100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teledex SIP ND2100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
