Instruction/ maintenance manual of the product iPhone SIP LD4100 Teledex
Go to page of 16
SIP LD4100/4200 Series User Guide WHEN USING YOUR TELEPHONE EQUIPMENT , BASIC SAFETY PRECAUTIONS SHOULD AL WA YS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. READ AND UNDERST AND ALL INSTRUCTIONS.
1. Introduction to the T eledex iPhone SIP LD Series IP Phone 3 1.1 Definitions, acronyms and abbreviations 3 1.2 The SIP LD Series works like a telephone 3 1.3 T wo lines 3 1.4 The network 3 1.5 The IP-PBX 3 1.6 The network system administrator 3 2.
1. Introduction to the T eledex iPhone SIP LD Series IP Phone The T ele dex iP hone SI P LD s eries I P phon e is a SIP-co mpliant network terminal. Instead of using standard analog or digital telephone lines, it connects to the network in the same manner as computers and printers do.
2.4 Connecting the Handset Plug one end of the coil cord into the RJ-10 receptacle on the handset, and the other end into the receptacle on the left side of the base.
Figure 2 shows the welcome page of the configuration portal. The phone can be configured through the main menu provided by this portal. NOTE: Except for upgrading the software online (decribed in subsection 3.2.7), the configuration for the SIP LD series will not be activated until the phone has been reset.
3.2.5 Configure the Call Featur es (Fig. 6) The configurable call features include Do Not Disturb, Call T ransfer , Call Forward No Answer , Call Forward Busy , Call Waiting, and Call Forward All. A call forward extension number can be pre-configured.
Fig 9: Reset the Phone 3.2.9 Restore to Factory Configuration T o restore the phone to the factory (default) configuration via the configuration portal, follow these steps: 1. Click “Restore to Factory” on the left menu. 2. Click “Restore” to restore factory settings.
4.7 T ransferring a Call The SIP LD series can transfer an ongoing call to another phone on the same network. T o transfer a call: 1. Press the FLASH key . This will place the call on hold and activate the second line. 2. Dial the number or extension of the party to whom you wish to transfer the call.
5.4 Three-W ay Conference Calls The SIP LD series supports three-way conference calling. The CONF or FLASH key allows the user to include two other parties in a three-way conversation. One three-way conference could be done using only one line or both lines.
Power Power supplied from network switch (PoE), or from approved local power adapter Dimensions & Weight W : 9.0” (22.86 cm) D: 8.5” (21.59 cm) H: 6.47” (16.43 cm) full upright position 3.97” (10.08 cm) full flat position Wt: 2.80 lb. (1.
Copyright 2008 Teledex LLC. All Rights Reserved. In formation and specification s subject to change without notice. One year warranty for Teledex SIP Teleph ones and Hybrid Display telephones Hardware.
Copyright 2008 Teledex LLC. All Rights Reserved. In formation and specification s subject to change without notice. • Costs incurred in removing t he telephone; shipping the t elephone to TELE DEX L.
Copyright 2008 Teledex LLC. All Rights Reserved. Informati on an d specifications subjec t to change without notice. TELEDEX iPhone END-USER LICENSE AGREEMENT IMPORTANT: READ CAREFULLY. This E nd User License Agreement is a legal agreement between you (either an individual or a single entity) and Teledex, LLC for the TELEDEX iPhone SOFTWARE.
Copyright 2008 Teledex LLC. All Rights Reserved. Informati on an d specifications subjec t to change without notice. or algorithms. You may not, and you shall not allow third parties to, modify the SOFTWARE or incorporate the SOFTWARE into, or with, any other software or create derivative works of any part of the SOFTW ARE.
Copyright 2008 Teledex LLC. All Rights Reserved. Informati on an d specifications subjec t to change without notice. not allow the exclusion of implied warranties so the above exclusion may not apply to you. You may have other rights that vary from jurisdiction to jurisdiction.
Copyright 2008 Teledex LLC. All Rights Reserved. Informati on an d specifications subjec t to change without notice. non-personally identifiable information from your use of the HARDWARE including, but not limited to, your Internet protocol addresses, serial numbers, the configuration of t he HARDWARE, usage statistics, etc.
An important point after buying a device Teledex iPhone SIP LD4100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teledex iPhone SIP LD4100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teledex iPhone SIP LD4100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teledex iPhone SIP LD4100 you will learn all the available features of the product, as well as information on its operation. The information that you get Teledex iPhone SIP LD4100 will certainly help you make a decision on the purchase.
If you already are a holder of Teledex iPhone SIP LD4100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teledex iPhone SIP LD4100.
However, one of the most important roles played by the user manual is to help in solving problems with Teledex iPhone SIP LD4100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teledex iPhone SIP LD4100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
