Instruction/ maintenance manual of the product MP3450i Tekkeon
Go to page of 16
MP3450i/MP3450 -10 User Guide.
.
USER GUIDE Contents Overview ..............................................................................................................2 Getting Started ..............................................................................................
2 Over view myPower ™ ALL Plus MP3450i is a rugged, high-capacity lithium polymer battery for use with instruments or industrial equipment. This universal battery provides instant power for devices .
3 USER GUIDE Getting to Know myPower ALL Plus Storing myPower ALL Plus Lithium polymer batteries must be used consistently for maximum performance. Therefore, if you do not use the battery often, you should complete a charge cycle (discharge/recharge the batter y) once a month.
4 Charging myPower ALL Plus T o charge MP3450i, you can use either the included power adapter or a solar panel. The steps to charge with either of these devices are described in this section. Charging with a Power Adapter myPower ALL Plus will charge in four hours when completely empty .
5 USER GUIDE The 3-Pin Input port is designed to allow charging by smaller solar panels (lower than 25W), and requires an optional Smart 3-Pin Adapter available from T ekkeon. T o use the solar panel with this port, the solar panel must have a minimum open circuit voltage of 15V .
6 Select/Connect the Adapter Tip 1. Select the adapter tip that fits securely into the power jack on your portable device. 2. Locate the polarity symbol on your device in the area around the power connector jack: WARNING: myPower ALL Plus supports Center Positive polarity only .
7 USER GUIDE Adjust the Voltage Level 1. Locate the voltage specification for your portable device. This can be found on the device power adapter label or device specification label which typically is found on the bottom of the unit. (If available, use the voltage specification shown on the power adapter .
8 VOL T AGE CHART.
USER GUIDE Connect the Portable Device 1. Connect the adapter tip into the power jack on the portable device. 2. Slide the ON/OFF switch to ON to turn on myPower ALL Plus. 3. T urn on the portable device and use it as you would normally . While connected, myPower ALL Plus will power and charge your device.
10 Obtaining Adapters Five adapter tips that fit most DC adapter jacks on a variety of portable devices are included with myPower ALL Plus. If none of these tips fits snugly into your portable device power jack, please go to our web site at www .tekkeon.
T roubleshooting If myPower ALL Plus does not power the portable device or charge the device battery , take these steps: 1. Verify that the current consumption of the portable device is not more than 4.
12 Limited W arranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period T ekkeon, Inc. will replace the defective product when the owner returns all product contents.
Customer Support Customer support for myPower ALL Plus is available at: T ekkeon, Inc. c/o myPower ALL Plus 3002 Dow Avenue, #134 T ustin, CA 92780 888-787-5888 / 714-832-1266 T ekkeon, Inc. must issue a Return Merchandise Authorization (RMA) number for all exchanges or refunds.
www .tekkeon.com © 2008 T ekkeon, Inc. Rev A All Rights Reserved myPower ™ is a trademark of T ekkeon, Inc. Cut loose. Stay loose..
An important point after buying a device Tekkeon MP3450i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tekkeon MP3450i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tekkeon MP3450i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tekkeon MP3450i you will learn all the available features of the product, as well as information on its operation. The information that you get Tekkeon MP3450i will certainly help you make a decision on the purchase.
If you already are a holder of Tekkeon MP3450i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tekkeon MP3450i.
However, one of the most important roles played by the user manual is to help in solving problems with Tekkeon MP3450i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tekkeon MP3450i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
