Instruction/ maintenance manual of the product ET6000 Tekkeon
Go to page of 20
ET6000 User Guide Handsfree Bluetooth ® Speakerphone et6000_ug_fnl 10/26/06 4:17 PM Page 1.
et6000_ug_fnl 10/26/06 4:17 PM Page 2.
USER GUIDE Contents Overview ..............................................................................................................................2 Getting Started ..............................................................................
2 Over view ezSpeak ™ by T ekkeon is a Bluetooth ® speakerphone with a digital display that gives you the freedom to cut loose from your Bluetooth mobile phone. With advanced features like stored number redial, last number redial and voice dialing, you can use ezSpeak to make and receive calls without ever touching your mobile phone.
3 USER GUIDE Getting to Know ezSpeak Digital Display Provides caller ID, call status, indication of device connection, volume level, and low battery indication Power/End Call Button Used to turn on/of.
4 Setting Up ezSpeak Before using ezSpeak, you must: • Charge ezSpeak • Pair ezSpeak to your mobile phone • Mount ezSpeak to your visor (for in car use) Directions for each of these activities are provided in the following three sections.
5 USER GUIDE Pairing ezSpeak to Y our Mobile Phone Pairing is the process of linking ezSpeak with your Bluetooth mobile phone or other Bluetooth device that supports a headset and/or handsfree profile. Before using ezSpeak with your mobile phone you must pair the devices .
6 Mounting ezSpeak When used in a car , ezSpeak is designed to be mounted to your car visor . Y ou can use the visor clip with or without the optional swivel clip. T o Mount ezSpeak with the Visor Clip 1. Attach the visor clip to ezSpeak by sliding the clip into the bracket on the rear of ezSpeak as shown.
7 USER GUIDE Using ezSpeak Powering ezSpeak T o T urn On ezSpeak 1. Press and hold approximately two seconds until the display lights up and “ET6000” appears on the display . NOTE: T o conserve power , the display will turn off after being idle for approximately eight seconds.
8 T o Make Calls Using Voice Dialing (if supported by your mobile phone) 1. Press . “Voice Dial” appears on the display and your phone is put into voice dialing mode. 2. After you hear a beep (usually between one to four seconds), speak the name of the person you wish to call.
9 USER GUIDE T o Receive a Call 1. When you hear ring tone or see “Ringing” and the calling number (if provided) on the display , press . The call is automatically connected to ezSpeak and “Call Active” appears in the display . T o Reject an Incoming Call (if supported by your mobile phone) 1.
10 T ransferring Calls Y ou can transfer calls between your mobile phone and ezSpeak. T o T ransfer Calls from Y our Mobile Phone to ezSpeak 1. With the call connected to your mobile phone, press . “T ransferring” and the connected number appear on the display and the call is transferred to ezSpeak.
Muting ezSpeak Y ou can mute and un-mute the microphone temporarily so that you cannot be heard by the connected party . T o Mute ezSpeak 1. While in talk mode, press and hold approximately two seconds. “Mute” appears on the display and the microphone is muted.
12 T roubleshooting Issue When you initiate the Bluetooth device pairing feature on your mobile phone, your phone cannot find ezSpeak. ezSpeak is not communicating with your mobile phone. When you receive a call on your mobile phone, the call is not automatically connected to ezSpeak after you press .
13 USER GUIDE Y our mobile phone does not accept voice commands when you are using ezSpeak. Y ou are encountering poor reception via ezSpeak. Y ou hear a crackling noise when connected on a call through ezSpeak. Y ou hear a clicking noise when connected on a call through ezSpeak.
14 Limited W arranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period T ekkeon, Inc. will replace the defective product when the owner returns all product contents.
15 USER GUIDE FCC Statement for Class B Digital Devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
16 Customer Support If you product is in need of repair or replacement, please contact the T ekkeon Customer Support Center at: T ekkeon, Inc. c/o ezSpeak 3002 Dow Avenue, #134 T ustin, CA 92780 888-787-5888 / 714-832-1266 www .tekkeon.com T ekkeon, Inc.
et6000_ug_fnl 10/26/06 4:17 PM Page 17.
www .tekkeon.com © 2006 T ekkeon, Inc. Rev A All Rights Reserved ezSpeak™ is a trademark of T ekkeon, Inc. Cut loose. Stay loose. et6000_ug_fnl 10/26/06 4:17 PM Page 18.
An important point after buying a device Tekkeon ET6000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tekkeon ET6000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tekkeon ET6000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tekkeon ET6000 you will learn all the available features of the product, as well as information on its operation. The information that you get Tekkeon ET6000 will certainly help you make a decision on the purchase.
If you already are a holder of Tekkeon ET6000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tekkeon ET6000.
However, one of the most important roles played by the user manual is to help in solving problems with Tekkeon ET6000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tekkeon ET6000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
