Instruction/ maintenance manual of the product TNR-50 Tangent
Go to page of 20
TNR-50 FM/AM tuner Instruc tion m anual.
01 ACCESSORIES Accessories 1 x TNR-50 1 x Remote control 2 x Batteries (Optional) 1 x FM Antenna (Optional) 1 x Operation Manual This operation manual supplies all the information that you need to have about your T angent TNR-50.
02 CONTENTS ACCESSORIES CONTENTS SAFETY PRECAUTIONS IMPORT ANT SAFETY INSTRUCTIONS IMPORT ANT INFORMA TION CONNECTION REMOTE CONTROL FRONT P ANEL AND CONNECTIONS CONNECTION Accessories 01 Contents 02 .
TO MINIMISE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET AS IT CONT AINS DANGEROUS VOL T AGE.
W ARNING: IT IS IMPORT ANT THA T YOU READ AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE UNIT . KEEP THIS MANUAL FOR FUTURE REFERENCE. This unit was designed and manufactured with a view to providing maximum safety for the user .
Service Do not attempt to carry out any service work yourself. By opening or removing the cabinet, you will be exposed to dangerous voltage or other hazards.
IMPOR T ANT INFORMA TION Handling instructions The top and back panel of the unit may become warm after prolonged use. This is not due to a defect. T urn off the power when the unit is not used.
07 CONNECTION Connection to the mains Do not turn on the power before all connections have been made correctly . Check that all connections have been made correctly before turning on the power . Check that the mains voltage is 230-240V AC50Hz before turning on the power .
08 REMOTE CONTROL Installation of batteries Remove the cover as illustrated. Position two batteries of the type AAA/R03/UM4 in the battery compartment. Make sure that the orientation of the batteries is correct (see drawing at bottom). Replace the cover .
09 Some of the functions of the unit can only be performed by means of the remote control. Some functions are connected with the selected signal input source. Some buttons on the remote control may therefore not be available if the corresponding signal input source has not been selected.
8 9 10 1 2 3 4 5 6 7 10 FRONT P ANEL AND CONNECTIONS Front panel Mains switch: LED indicator: FM/AM: Autotune: Memory: Preset -: Preset +: St/Mono: Reset: T uning: Used to interrupt the mains voltage. Lights green when the unit is turned on. Lights red when the unit is in standby mode or in operation.
11 FRONT P ANEL AND CONNECTIONS Connections 1 2 3 Stereo Output: Antenna AC input Analogue stereo output. For connection to stereo amplifier or receiver with analogue input. : For connection of FM or AM antenna or for the communal antenna system. : For connection of mains voltage.
12 CONNECTION Audio connection layout FM ANTENNA AM TNR PHONO TUNER DVD CD AUX 1 AUX2 FUNCTION VOLUME POWER HEADPHONE AMP-50 AMPLIFIER Analog amplifier/receiver This page only contains suggestions for connection of your T angent TNR-50. Note that the accessories in the pictures on this page are not included in the supply .
13 FM ANTENNA AM FM ANTENNA AM ADJUSTING THE ANTENNA Adjusting the antenna For an optimal result it is recommended to install a FM antenna on the roof or on the loft. The FM antenna must be adjusted for the best possible result. A good tip is to let the antenna end point in a vertical direction and fix it on a wall.
14 + AUTO TUNE + TUNE PRESET MEMO FM AM ST/MO RDS POWER TNR-50 PHON POWER TNR-50 FM/AM TUNER 1 3 3 T urn on the unit by pressing the mains switch. Press the standby button on the remote control to switch to standby mode. The display will turn of f and all functions will be reduced to a minimum to make sure that the unit uses minimal power .
15 OPERA TION AND FUNCTIONS + AUTO TUNE + TUNE PRESET MEMO FM AM ST/MO RDS POWER TNR-50 -P R E S E T+ MEMORY AUTOTUNE FM/AM ST/MONO RESET TUNING T uning 1 2 2 1 If you want to manual tune a channel, you must press the tune + or - button on the remote control, or turn the tuning knob on the front panel.
16 OPERA TION AND FUNCTIONS This tuner can be reset. This is used to delete channel stored in the unit. Press the RESET button on the front panel to reset the unit.
17 TROUBLESHOOTING T roubleshooting PROBLEM CAUSE/REMEDY No power when the unit is turned on. - Switch on the electric current at the socket. - Check that the plug has been correctly inserted into the socket. - The internal fuse has blown and must be replaced by a qualified service technician.
18 TECHNICAL DA T A T echnical data RF section: T uner bands FM 87.5-108.0MHz AM 522-1620KHz Sensitivity -96dBm type 2 lines of 16 characters LED backlight 40 Stereo, 2.5Vpp 48kHz sample rate 16 bit sample resolution See back panel 430 x 290 x 75mm 4.
F or fur ther inf ormation please visit our website: www .tangent-audio.c om I tem no . 40427 Ser vice hotline +45 9641 1599.
An important point after buying a device Tangent TNR-50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tangent TNR-50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tangent TNR-50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tangent TNR-50 you will learn all the available features of the product, as well as information on its operation. The information that you get Tangent TNR-50 will certainly help you make a decision on the purchase.
If you already are a holder of Tangent TNR-50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tangent TNR-50.
However, one of the most important roles played by the user manual is to help in solving problems with Tangent TNR-50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tangent TNR-50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
