Instruction/ maintenance manual of the product TPH-2501 Tanaka
Go to page of 14
Owner’ Owner’ Owner’ Owner’ Owner’ s Man s Man s Man s Man s Man ual ual ual ual ual Model Numbers: TPH-2501,TPH-250PF TPH-2501,TPH-250PF TPH-2501,TPH-250PF TPH-2501,TPH-250PF TPH-2501,TPH-2.
www.tanaka-usa.com 1 custsvc@tanaka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN Before using this unit: • Read the operator’s manual carefully. • Check that the cutt ing equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment.
www.tanaka-usa.com 2 custsvc@tanaka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN.
www.tanaka-usa.com 3 custsvc@tanaka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN 2. Warnings and safety instructions Operator Safety • Always wear head protection with ful l face shield to help protect against falling branches and debris.
www.tanaka-usa.com 4 custsvc@tanaka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN Throttle wire/stop cord Remove air cleaner cover. (Fig. 1-4) Connect stop cords. (Fig. 1 -5) Set outer-receiver (1) (If so provided) into wire guide and put throttle wire through the outer receiver.
www.tanaka-usa.com 5 custsvc@tanaka-i sm.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN 4. Operating procedures. (Fig. 2-1) WARNING! This unit is equipped with a two-stroke engine. Always run the engine on fuel, which is mixed with oil. Provide good ventilation, when fueling or handling fuel.
www.tanaka-usa.com 6 custsvc@tana ka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN Starting (Fig. 2-5) CAUTION! Before starting, make sure the cutting attach ment does not touch anything. 1. Set ignition switch (1) to ON position. (Fig. 2-5) *Push priming bulb (4) several times so that fuel flows through the bulb or return pipe.
www.tanaka-usa.com 7 custsvc@tana ka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN SAFE OPERATION CAUTION! • Always wear gloves during operati on or maintenance. • Review the area to be trim med. Look for hazards that co uld contribute to unsafe conditions .
www.tanaka-usa.com 8 custsvc@tanaka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN 5. Maintenance MAINTENANCE, REPLA CEMENT, OR REPAIR OF THE EMISSION CONTROL D EVICES AND SYSTEMS MAY BE PERFORMED BY AN Y NONROAD ENGINE REPAIR ESTABLISHMENT OR INDIVIDUAL.
www.tanaka-usa.com 9 custsvc@tanaka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN Fuel Filter (Fig. 3-2B) Drain all fuel from fuel tank and pull fuel filter line from tank. Pull filter element out of holder assembly. Replace filter if it appears to be discolored or hardened from use.
www.tanaka-usa.com 10 custsvc@tana ka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN Cutter blade (Fig. 4-1, 2) The blades are installed to the cutter guide with three to five bolts depen ding on cutt er length. Those bolts are tightened with a clearance s o that the cutters ca n move smoothly.
www.tanaka-usa.com 11 custsvc@tanaka-ism.c om Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN Maintenance schedule Below you will find some genera l maintenance instructions. For further information please contact your service dealer. Daily maintenance • Clean the exterior of th e unit.
www.tanaka-usa.com 12 custsvc@tanaka-ism.c om Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN 6. Specifications Note : Sound levels are calculated as the time-w eighted energy total under various working conditions with the following time distri bution: ½ idling, ½ racing.
www.tanaka-usa.com 13 custsvc@tanaka-ism.com Owner’s Manual TPH-2501,TPH-250PF,TPH-270PF/PN Declaration of conformity Tanaka Kogyo Co., Ltd., 3-4- 29 Tsudanum a, Narashino, Chiba, Ja pan TPH-2501/25.
An important point after buying a device Tanaka TPH-2501 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tanaka TPH-2501 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tanaka TPH-2501 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tanaka TPH-2501 you will learn all the available features of the product, as well as information on its operation. The information that you get Tanaka TPH-2501 will certainly help you make a decision on the purchase.
If you already are a holder of Tanaka TPH-2501, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tanaka TPH-2501.
However, one of the most important roles played by the user manual is to help in solving problems with Tanaka TPH-2501. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tanaka TPH-2501 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
