Instruction/ maintenance manual of the product TBC-340PF/PFD Tanaka
Go to page of 21
Owner’s Manual Model Numbers: TBC-250,TBC-250PF/PFD, TBC-2501,TBC-2510, TBC-270PF/PN,TBC-270PFD/PND TBC-300/SDH/3010,TBC-340/D, TBC-340PF/PFD BRUSHCUTTERS P/N 29363 Date 04-06-05 Supplier To The Outdoor Power Equipment Industry ISM, Inc. • 1028 4 th Street SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212 www.
www.tanaka-usa.com 1 custsvc @tanaka-ism.co m Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN/ PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D Before using this unit: • Read the operator’s manual carefully. • Check that the cutt ing equipment is correctly assembled and adjusted.
www.tanaka-usa.com 2 custsvc@tan aka- ism.co m Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN/ PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D Blade thrust may occur when the spinning blade contacts a solid object in the critical area.
www.tanaka-usa.com 3 custsvc@tana ka-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN/ PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D 1. What is What? Since this manual coves several models, there ma y b e some difference between pictures and your unit.
www.tanaka-usa.com 4 custsvc@tan aka-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-2501, TBC-2510,TBC-270PF/PN T B C -27 0 PN / PND , TB C - 300/S DH /30 1 0, TB C - 3 4 0/ D.TB C - 3 4 0 PF / D 2. Warnings and safety instructions. Operator Safety • Always wear a safet y face shield or goggles .
www.tanaka-usa.com 5 custsvc@tan aka-ism.c om Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270P N/P N D ,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D 3.
www.tanaka-usa.com 6 custsvc@tan aka-ism.c om Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270P N/P N D ,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D Throttle wire/stop cord Remove the air cleaner cover. (Fig. 1 -4) Connect stop cords.
www.tanaka-usa.com 7 custsvc@tan aka- ism.co m Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270P N / PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D When using a trimmer head (Fig.1-9B) wi th two-piece type bl ade guard, attach the guard extension to the blade guard.
www.tanaka-usa.com 8 custsvc@tan aka- ism.co m Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270P N/P N D/PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D Installation of cutting blade (Fi g .
www.tanaka-usa.com 9 custsvc@tan aka-ism.c om Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270P N/P N D ,TBC - 300/SDH/3010,TB C - 340/D ,TBC - 340PF/D 4. Operating procedures Fuel (Fig. 2-1) WARNING! The trimmer is equipped with a two-stroke engine.
www.tanaka-usa.com 10 custsvc@tan aka-ism.c om Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270P N/ PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D CAUTION! Before starting, make sure the cutting attach ment does not touch anything.
www.tanaka-usa.com 11 custsvc@tanak a-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270P N/ PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D Cutting (Fig. 2-4, 4B, 4C, 4D) • When cutting, operate engine at ov er 6500 rpm.
www.tanaka-usa.com 12 custsvc@tana ka-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN/ PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D 5. Maintenance MAINTENANCE, REPLA CEMENT, OR REPAIR OF THE EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY NONROAD ENGINE RE PAIR ESTABLISHMENT OR INDIVIDUAL.
www.tanaka-usa.com 13 custsvc@tana ka-ism.c om Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN/ PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D Drain all fuel from fuel tank and pull fuel filter line from tank. Pull filter element out of holder assembly.
www.tanaka-usa.com 14 custsvc@tana ka-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN/ PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D Angle transmi ssion (Fig. 3-5B) Check the gear case grease level about every 50 hours of oper ation by removing the grease filler plug on the side of the case.
www.tanaka-usa.com 15 custsvc@tana ka-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN/ PND,TBC - 300/SDH/3010,TBC - 340/D TBC - 340PF/D Maintenance schedule Below you will find some genera l maintenance instructions .
www.tanaka-usa.com 16 custsvc@tana ka-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN /PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D 6. Optional Installation of free disk set (optional) (Fig. 4-1, 1 B) 1) Disassemble free disk (7) from the free disk set by loosening three bolts (8).
www.tanaka-usa.com 17 custsvc@tana ka-ism.com Owner’s Manual TBC-250/250PF/PFD, TBC-2501,TBC-2510 TBC - 270PF/PN/PFD/PND,TBC - 300/SDH/3010,TBC - 340/D 7. Specifications NOTE: Sound levels are calculated as the time-weighte d energy total under v arious working conditions with the followin g time distribution: ½ idlin g, ½ racin g .
www.tanaka-usa.com 18 custsvc@tana ka-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN /PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D Declaration of conformity D6claration de conformit6 Dichiarazione di conformita Konformitiitserkliirung Declaraci6n de conformidad Konformitetsdeklaration Tanaka Kogyo Co.
www.tanaka-usa.com 19 custsvc@tana ka-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 P N /PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/ D IMPORTANT NOTICE THIS INFORMATION IS FOR TH E US AND CANADIAN MARKETS ONLY.
www.tanaka-usa.com 20 custsvc@tana ka-ism.com Owner’s Manual TBC-250/250PF/PFD,TBC-250 1,TBC-2510,TBC-270PF/PFD TBC - 270 PN /PND,TBC - 300/SDH/3010,TBC - 340/D ,TBC - 340PF/D (1) Fixed line commercial cutting heads offer exc ellen t durability and light weight.
An important point after buying a device Tanaka TBC-340PF/PFD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tanaka TBC-340PF/PFD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tanaka TBC-340PF/PFD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tanaka TBC-340PF/PFD you will learn all the available features of the product, as well as information on its operation. The information that you get Tanaka TBC-340PF/PFD will certainly help you make a decision on the purchase.
If you already are a holder of Tanaka TBC-340PF/PFD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tanaka TBC-340PF/PFD.
However, one of the most important roles played by the user manual is to help in solving problems with Tanaka TBC-340PF/PFD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tanaka TBC-340PF/PFD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
