Instruction/ maintenance manual of the product RXD1215sas Synology
Go to page of 44
Quick Installation Guide Synology RackStation RC18015xs+ Expansion Unit RXD1215sas.
2 Chapter 1: Before Y ou Start Package Contents 3 At a Glance 5 Safety Instructions 8 Chapter 2: Hardware Setup T ools and Parts for Drive Installation 9 Install Drives in Synology RXD1215sas 9 Connec.
3 1 Chapter T able of Contents Thank you for purchasing Synology RackStation RC18015xs+ / RXD1215sas expansion unit! Before setting up your new RackStation/expansion unit, please check the package contents to verify that you have received the items below .
4 Chapter 1: Before Y ou Start RXD1215sas Expansion unit x 1 AC power cord x 2 Quick Installation Guide x 1 Screws for 3.5” drives x 52 Screws for 2.
Chapter 1: Before Y ou Start 5 At a Glance RC18015xs+ Front Back No. Article Name Location Description 1 Power Button and Indicator Front 1. Press to power on the RackStation. 2. T o power off the RackStation, press and hold until you hear a beep sound and the Power LED starts blinking.
6 Chapter 1: Before Y ou Start No. Article Name Location Description 8 USB 3.0 Port Back Connect external drives to the RackStation here. Note: Devices other than storage are not supported. USB external drives can only be used on the RackStation serving as active server .
Chapter 1: Before Y ou Start 7 No. Article Name Location Description 1 Power Button and Indicator Front Press to manually power on the expansion unit. Note: When the expansion unit is working within a HA cluster, you cannot force a shutdown of it by pressing and holding its power button.
8 Chapter 1: Before Y ou Start Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity . Place the product right side up at all times. Do not place near any liquids.
9 2 Chapter T ools and Parts for Drive Installation • A screwdriver • At least three 3.5” or 2.5” SAS drives (please visit www .synology .com for compatible drive models.) Warning: 1. If you install a drive that contains data, the system will format the drive and erase all data.
10 Chapter 2: Hardware Setup 2 Install drives: • For 3.5” drives: Place the drive in the drive tray . T urn the tray upside down and tighten screws into the four spots indicated below to secure the drive. • For 2.5” drives: Place the drive in the drive tray .
Chapter 2: Hardware Setup 11 4 Push the handle inward to secure the drive tray . 5 Push the switch on the drive tray handle to the left to lock the drive tray . 6 Repeat the steps above to assemble the other drives you have prepared. 7 Drives are numbered as shown below .
12 Chapter 2: Hardware Setup Connect with Synology RC18015xs+ 1 Use at least one LAN cable to connect each RackStation unit to your switch, router or hub. Note: Both RackStation units of the HA cluster must be connected to the network in the identical way .
Chapter 2: Hardware Setup 13 4 Connect the expansion unit to both RackStation units with mini-SAS cables. a Connect one end of mini-SAS cable to the SAS-OUT port on a RackStation, and the other end to the SAS-IN port on SAS module A of the expansion unit.
14 Chapter 2: Hardware Setup.
15 3 Chapter After hardware setup is nished, please install DiskStation Manager (DSM) – Synology’s browser-based operating system – on your RackStation.
16 Chapter 3: Install DSM on RackStation 6 If you accidentally leave the installation process before it is nished, go to nd.synology .com again to nd the RC18015xs+ model with the status of Ready , and login to the DSM as admin (default administrative account name) with the password left blank.
Chapter 3: Install DSM on RackStation 17 Conrm Connection and Manage Storage Spaces 1 Login to the DiskStation Manager (DSM) of the RackStation unit. 2 Go to Main Menu > Storage Manager > Overview to conrm the expansion unit(s) are successfully connected.
18 Chapter 3: Install DSM on RackStation 4 Once the RAID group is ready , go to V olume on the left panel to manage the volumes. • If you want to create a new volume on the expansion, click Create and follow the instructions of the wizard.
19 4 Chapter RC18015xs+ Note: Before powering off and disconnecting the RackStation serving as the active server , please manually perform a switchover in DSM to minimize the service downtime. For detailed information, please refer to DSM Help > High A vailability Manager .
20 Chapter 4: Maintenance and Expansion 2 Open the RackStation by removing the top cover . a Loosen the two screws on the back of the model holding the top cover of the chassis by turning them counterclockwise. b Remove the top cover by rmly grasping the thumb grooves and pulling in the direction indicated below , and put the top cover aside.
Chapter 4: Maintenance and Expansion 21 3 Install the network interface card. a Pull the tab on the port access bracket to the right so as to remove the port access cover . b Align the card’s connector and bracket with the slots. c Insert the card into the slot.
22 Chapter 4: Maintenance and Expansion d Push back the tab to secure the newly inserted card. Note: Make sure the connector is fully inserted. Otherwise, the network interface card might not be able to function properly . 4 Put back the top cover you lifted in step 2.
Chapter 4: Maintenance and Expansion 23 1 Shut down your RackStation. Disconnect all cables connected to your RackStation to prevent any possible damage. 2 Open the RackStation by following step 2 of Attach a Network Interface Card to the RackStation .
24 Chapter 4: Maintenance and Expansion T o make sure RackStation recognizes the new memory capacity: 1 Log in to DSM as admin or a user belonging to the administrators group.
Chapter 4: Maintenance and Expansion 25 Replace Malfunctioning Fan Module If a fan module malfunctions, please see the instructions below to open the RackStation and replace the malfunctioning fan module. 1 Shut down your RackStation. Disconnect all cables connected to your RackStation to prevent any possible damage.
26 Chapter 4: Maintenance and Expansion Replace Malfunctioning RackStation If a RackStation malfunctions, please see the instructions below to replace the malfunctioning RackStation.
Chapter 4: Maintenance and Expansion 27 RXD1215sas Add More Expansion Units to the HA Cluster The HA cluster with RackStation RC18015xs+ supports working with up to fteen RXD1215sas expansion units. Follow the instructions below to add more expansion units to the HA cluster .
28 Chapter 4: Maintenance and Expansion Note: 1. The expansion units must be connected serially with the modules on corresponding sides for each RackStation unit. 2. Both the RackStation units must be connected to their shared expansion units in the same order .
Chapter 4: Maintenance and Expansion 29 1 Unplug the mini-SAS cables from the SAS module on which the malfunctioning fan is to be replaced. Note: If the SAS module is serially connected to the RackStation serving as the active server , please manually perform a switchover in DSM before disconnecting SAS cables from the SAS module.
30 Chapter 4: Maintenance and Expansion T o replace the malfunctioning SAS module: Prepare a new SAS module, and push it back to the slot until you hear a click. T o replace the SAS module’ s malfunctioning fan: 1 Remove the malfunctioning fan by pulling it up from the SAS module.
Chapter 4: Maintenance and Expansion 31 2 Prepare a new fan, align the arrow to point at the back panel as illustrated below , and insert it into the empty slot.
32 Chapter 4: Maintenance and Expansion.
A Appendix 33 Specications Item RC18015xs+ Internal Drive N/A Maximum Raw Capacity 1440TB (180 x 8TB HDD) with RXD1215sas (expansion unit) x 15 External Port • USB 3.
34 Appendix A: Specications Item RXD1215sas Internal Drive 3.5" or 2.5" SAS x 12 External Port • SAS-IN x 2 • SAS-OUT x 2 Maximum Internal Raw Capacity 96TB (12 x 8TB HDD) Hot Swappab.
B Appendix 35 LED Indicator T able RC18015xs+ LED Indicator Color Status Description ST A TUS Green Static V olume normal Orange Blinking V olume degraded / volume crashed V olume not created DSM not .
36 Appendix B: LED Indicator T able RXD1215sas LED Indicator Color Status Description Drive Status Indicator (on tray) Green Static Drive ready and idle Blinking Accessing drive Red Static Drive error.
SYNOLOGY , INC. END USER LICENSE AGREEMENT IMPORT ANT–READ CAREFULL Y: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A LEGAL ENTITY) AND SYNOLOGY , INC.
Section 10. Support. During the period specied in the Section 9, Synology will make available to you the support services. Following the expiration of the applicable period, support for Software may be available from Synology upon written request. Section 1 1.
SYNOLOGY , INC. LIMITED PRODUCT W ARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES T O THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY , INC. AND ITS AFFILIA TES, INCLUDING SYNOLOGY AMERICA CORP , (COLLECTIVEL Y , "SYNOLOGY").
number when asking for such assistance. For warranty claims, Customer must return the complete Product to Synology in accordance with this Section 2.3 to be eligible for coverage under this Warranty .
OTHER GOODS OR SERVICES PROVIDED UNDER THIS W ARRANTY IS LIMITED TO THE AMOUNT ACTUALL Y P AID BY CUSTOMER FOR THE PRODUCT REGARDLESS OF THE AMOUNT OF DAMAGES CUST OMER MA Y INCUR AND WHETHER BASED ON CONTRACT , TOR T (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEOR Y .
4 . 9 Entire Agreement. This W arranty constitutes the entire agreement, and supersedes any and all prior agreements, between Synology and Customer related to the subject matter hereof.
.
P/N 15-05C010010 Printed in T aiwan.
An important point after buying a device Synology RXD1215sas (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Synology RXD1215sas yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Synology RXD1215sas - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Synology RXD1215sas you will learn all the available features of the product, as well as information on its operation. The information that you get Synology RXD1215sas will certainly help you make a decision on the purchase.
If you already are a holder of Synology RXD1215sas, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Synology RXD1215sas.
However, one of the most important roles played by the user manual is to help in solving problems with Synology RXD1215sas. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Synology RXD1215sas along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
