Instruction/ maintenance manual of the product 6900DTD Sylvania
Go to page of 96
INSTRUCCIONES EN ESP AÑOL INCLUID AS. A TSC/NTSC STB 6900DTD As an E NERGY S TAR ® Partner, our company has determined that this product meets the E NERGY S TAR ® guidelines for energy efficiency.
Ta b le of Contents 1 Before Using . . . . . . . . . . . . . . . . . 3 Important Safeguards . . . . . . . . . . . . . . . 3 Precautions . . . . . . . . . . . . . . . . . . . . . . 5 Information on digital broadcasting . . . . 6 Major features of STB .
3 EN 1A23 1 Before Using 1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All w arnings on the appliance and in the operating instructions should be adhered to.
4 EN 1A23 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to this product, be sure the antenna or cable system is grounded so as to provide some protection against voltage sur ges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No.
5 EN 1A23 1 Before Using AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6 EN 1A23 Before Using Digital broadcasting is the most advanced format of broadcasting, emplo ying a new technology for compression of audio and video signals which allows broadcasters to transmit digital signals using e xisting terrestrial systems.
7 EN 1A23 Before Using 1 Before Using • Capable of receiving digital (A TSC*), analog (NTSC*), and cable (NTSC) broadcasts • Capable of receiving High Def inition TV broadcasts • Capable of receiving Dolby® digital 5.1 audio • Alternate languages for OSD are av ailable.
8 EN 1A23 Before Using 1P O WER button: T urns STB on and off. 2P O WER indicator: Lights up while STB is on. NO TE: When turning the STB on, the power indicator will blink f irst and light up. When turning the STB off, the po wer indicator will blink first and go of f.
9 EN 1A23 Before Using 1 Before Using 1 ANT . IN Jack: Use to connect an antenna to STB. 2 DIGIT AL A UDIO (CO AXIAL) Jack: Use to connect a decoder or an amplifier to STB with a digital coaxial cable. NO TE: Y ou must use this jack and a Dolby® Digital receiv er for Dolby® Digital 5.
1P O WER button: Tu rns STB on and of f. 2 Number buttons: Use to input channel numbers and passwords, and to set time. 3 ENTER button: In SETUP menu, press to determine your selection. 4 CH o / p b uttons: Press to change the channels up or down. 5N a vigation b uttons o / p / s / B : Press to mov e the highlight up, down, left or right.
Y ou will find STB and the follo wing accessories when unpacking the carton box of STB: 1 Unsnap the battery cover fr om the back of the remote control. 2I nstall two AA batteries making sure the polarity (+ / -) direction is correct. NO TE: When replacing batteries, make sure to replace them in pairs.
12 EN 1A23 Before Using SETUP WIZARD guides you through initial setup. " Create new setup" "K eep old setup" "SETUP" "QUIT" Q UIT SETUP : : SETUP WIZARD Language for screen (1/8) ( Refer to page 25 through page 29.
13 EN 1A23 Before Using 1 Before Using Adding channels / Deleting channels ( Refer to page 43, 46, 49, 51.) ( Refer to page 54, 56.) Adjusting antenna Receiving channels (Autoscan) Selecting screen fo.
14 EN 1A23 Before Using Setting the clock (Daylight Savings Time) Setting the clock (T ime Zone) Setting the clock (Manual) Adjusting the clock automatically CLOCK QUIT CHANNEL DISPLA Y CLOCK DET AIL .
15 EN 1A23 Before Using 1 Before Using Setting for V -CHIP/CC Setting MP AA rating Setting TV rating Setting CC options Setting a new password DET AIL QUIT CHANNEL DISPLA Y CLOCK DET AIL V -CHIP / CC MENU LANGUA GE ENGLISH V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET AIL Enter password.
16 EN 1A23 Connections Use a standard antenna cable to connect the wall jack to the ANT IN Jack on STB. STB connection to the antenna Rear panel of STB To the antenna To the antenna WHEN CONNECTING T O CABLE BO X ALSO: NO TE: Antenna and antenna cable are not included.
17 EN 1A23 Connections e.g .: Connection to VCR When you connect the antenna cab le to another device , be sure to use a splitter as shown below . CA UTION Right Splitter ANT .
18 EN 1A23 Connections There will be various w ays of connecting STB to other devices. Make your connection according to your choice of devices, screen format, and sound format. Y ou will find some sample connections in the follo wing pages. • All jacks on STB will not need to be connected.
19 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV .
20 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV . 3 Use an S-video cable to connect the S-VIDEO output jack on STB to an S-video input jack on the TV .
21 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT . IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) of STB to the audio input jacks (L, R) on the TV .
22 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT . IN jack on STB. 2 Use a standard audio cable to connect the audio output jacks (L, R) on STB to the audio input jacks (L, R) on the stereo. 3 Connect STB and the TV with a video cable.
23 EN 1A23 Connections 1 Use a standard antenna cable to connect the wall jack to the ANT . IN jack on STB. 2 Connect a coaxial digital audio cable (purchase locally) from DIGIT AL A UDIO (COAXIAL) output jack on STB to a coaxial digital audio input jack on the digital decoder .
1 Use a standard antenna cable to connect the wall jack to the ANT IN jack on STB. 2 Use a standard audio cable to connect the set of audio output jacks (L, R) on STB to the set of audio input jacks (L, R) on the VCR.
SETUP WIZARD SETUP WIZARD is the very con venient menu for you to make the initial settings of STB. When STB is turned on for the first time after connecting the A C power cord, SETUP WIZARD is displayed on the screen automatically . Y ou can complete the following items for the initial Setups through this menu.
3 Select a desired language using o o / p p navigation b uttons, then press ENTER. • The selected language will be activ ated. • SETUP WIZARD 2/8 will appear . 4 STB starts scanning channels. • W ait until the scanning is complete. • When the scanning is complete, “100%” will be indicated in the box, then the next screen appears.
7 Select the desired time zone using o o / p p / s s / B B navigation b uttons, then press ENTER. • SETUP WIZARD 5/8 will appear . NO TE : Refer to “INFORMA TION on T ime Zones ” on page 61. 8 Enter YEAR, D A TE and TIME using o o / p p / s s / B B navigation b uttons or number b uttons.
9 Press ENTER when the cursor is on SET . • Y our settings will be activ ated. • SETUP WIZARD 6/8 will appear, then STB will start searching channels with Automatic Clock Adjustments to keep the time correct. 10 Select the desired channel to sear ch from the c hannel map using o o / p p navigation b uttons.
11 Press ENTER. • SETUP WIZARD 7/8 will appear . 12 Select the desired screen ratio using o o / p p navigation buttons, then press ENTER. • SETUP WIZARD 8/8 will appear . NO TE: Refer to “Selecting screen formats” on page 54 for further information.
30 EN 1A23 Basic Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 STB is capable of receiving analog (NTSC format) and digital (A TSC format) broadcasts. All av ailable channels from any of these broadcast sources can be tuned in using the CH o / p b uttons and number buttons on your remote control.
When using number b uttons (E.g., entering 26-1): 1. Enter the main channel number, press the “ – ” b utton, then enter the sub-channel number . NO TE: Every channel number consists of a main channel and a sub-channel.
When returning to the channel y ou were last watching: • STB will tune back in the channel you were last w atching. About sub-channel br oadcasting: There may be different programs being broadcast on sub-channels through a single channel from A TSC.
33 EN 1A23 Basic Operation 4 Basic Operation EN 1A23 EN 1A23 EN 1A23 The channel banner provides you with information on the channel you hav e selected. 1 Press INFO to display a c hannel banner . • Channel information will appear in the channel banner .
34 EN 1A23 Basic Operation EN 1A23 EN 1A23 EN 1A23 Information icons DTV : NTSC: HD (High Definition): SD (Standard Definition): SD (Standard Definition): LOCK: CC (Closed Caption): V -CHIP/CC: Program title Program rating Program description Channel number : Indicates the current channel number .
When the channel you are tuning in provides alternate audio formats and languages, you can change to any alternate. When you are tuning in A TSC, language and format can be set at the same time through an audio-map. A udio map: (Onl y when tuning in A TSC) Audio format and language outputs from a broadcasting station are stored in an audio-map.
1 Press A UDIO b utton. Remote: When tuning in NTSC: The sequence will repeat as shown belo w when av ailable. Screen: When tuning in A TSC: The sequence will repeat according to audio-map when the A UDIO b utton is pressed. NO TE: O THER will be indicated when alternate languages are not English, Spanish, or French.
Y ou can stop the picture on the screen anytime by pressing STILL o b utton. 1 Press STILL o o bu tton while watching TV . • STILL will be indicated on the lower left while the picture is displayed. Remote: Screen: NO TE: During STILL, the programs audio will continue.
Some messages are displayed on the screen during channel changing or during programs. When STB cannot receiv e a channel signal, the whole screen becomes gray , then NO SIGNAL appears in the center .
Electronic Program Guide (EPG) is an application for digital channels that lists current and scheduled programs that are or will be av ailable on each channel and a short summary or commentary for each program. EPG is the electronic equiv alent of a printed television program guide.
2 Select the desired program using o o / p p / s s / B B navigation buttons. • The cursor will mov e as you press any navigation b utton. When viewing EPG for the next tw o hours up to the next se ven days: Press B navigation button. • EPG for the next two hours will appear .
41 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 Information icons LOCK: Indicates that the current program is blocked according to your V -CHIP setting. CC (Closed Caption): Indicates that the program being broadcast is av ailable with closed captioning.
42 EN 1A23 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 includes: • ADD / DELETE: Y ou can add or delete channels in the channel map. • ANTENNA: Y ou can verify and adjust the signal strength of each channel to get a clearer picture.
Y ou can add channels in the channel map. ADD: Y ou can add desired channels to the channel map. Once you add channels to a channel map, you will be allowed to select the channels in order using CH o / p b uttons. NO TE: When you add digital and analog channels with the same main channel number , you will need to add each channel.
2 Select CHANNEL using o o / p p navigation b uttons, then press ENTER. • CHANNEL menu will appear . 3 Select ADD/ DELETE using o o / p p navigation b uttons, then press ENTER. • ADD/ DELETE menu will appear . 4T o add, first enter the digital channel n umber 26-1.
5 Select ADD using o o / p p navigation b uttons, then press ENTER. • 26-1 will be added to the channel map. NO TE: Digital channels can be added only with main channel numbers. When the digital channel added to a channel-map has sub-channels, howe ver , the sub- channels can be selected using CH o / p b uttons.
Y ou can add and delete channels in the channel map. DELETE : Y ou can delete channels from the channel-map. NO TE: When you delete digital and analog channels with the same main channel number , you will need to delete each channel. NO TE: Once you delete channels from a channel-map, you cannot select those channels using CH o / p b uttons.
3 Select ADD/DELETE using o o / p p navigation b uttons, then press ENTER. • ADD/ DELETE menu will appear . 4 Select DELETE using o o / p p navigation b uttons, then press ENTER.
5 Select the digital channel number 26 using o o / p p navigation b uttons. • 26-1 will be indicated in the box at the top of the screen. TIP: When adding a channel number previously deleted, add the channel number by the steps in the ADD menu or renew the whole channel map with the AU T OSCAN menu.
Y ou can verify the signal strength of each channel to get a clearer picture for both digital and analog broadcasts. E.g., when adjusting the digital channel 26-1. 1 Select channel 26-1 to adjust using n umber button or CH o o / p p b uttons. • Channel 26-1 will be tuned in.
2 Press SETUP to display SETUP men u. • SETUP menu will appear . 3 Select CHANNEL using o o / p p navigation b uttons, then press ENTER. • CHANNEL menu will appear . 4 Select ANTENNA using o o / p p navigation b uttons, then press ENTER. • ANTENN A menu will appear , then STB starts receiving the signal strength of the channel.
51 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 STB has the con venient function to get av ailable channels automatically . AU T OSCAN is capable of recei ving av ailable channels, both analog and digital, and storing those channels in a channel map.
3 Select A UT OSCAN using o o / p p navigation b uttons, then press ENTER. • AU T OSCAN menu will appear . 4 Select NEXT using s s / B B navigation b uttons, then press ENTER. • Scanning window will appear , then STB will start scanning for all av ailable channels.
To cancel AUT OSCAN during scanning: Press SETUP or ENTER to cancel. • AU T OSCAN CANCELLED will appear on the screen. CA UTION: If A UT OSCAN is cancelled during scanning, some channels not yet scanned may not be receiv ed. It is recommended to complete A UT OSCAN.
STB allows you to select a screen ratio and a display mode (aspect ratio) to match the formats of the program being broadcast and your TV screen. Y ou can also change to aspect ratios you prefer to w atch. There are two screen ratios used in manufacturing TVs.
3 Select SCREEN RA TIO using o o / p p navigation b uttons, then press ENTER. • Screen ratio options will appear . 4 Select the desired screen ratio using o o / p p navigation buttons, then press ENTER. • The screen ratio will be set. 5 Press ENTER to exit SETUP men u.
1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DISPLA Y using o o / p p navigation b uttons, then press ENTER.
3 Select DISPLA Y MODE, using o o / p p navigation b uttons , then press ENTER. • Display mode options will appear . 4 Select the desired display mode using o o / p p navigation buttons, then press ENTER. • The display mode will be set. NO TE: Y ou can choose the display mode as you prefer .
INFORMA TION on Screen Ratio and Display Mode Letter Box Displays the entire picture image while fitting the picture to the screen by applying gray bars to the top and bottom of the screen. No information will be lost. Zoom Expands the picture image to fill the screen while cropping some images on the left and right.
59 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 To get the EPG (Electronic Program Guide) and Channel banner , you need to set the CLOCK correctly . NO TE: The clock function is featured for displaying EPG so there may be 5 minute-time lag a day at the maximum.
3 Select Daylight Sa vings Time (DST) using o o / p p navigation b uttons, then press ENTER. • Daylight savings time setting menu will appear . 4 Select ON or OFF using s s / B B navigation b uttons, then press ENTER. • Daylight savings time will be set, then CLOCK menu will appear .
6 Select the desired time zone using o o / p p / s s / B B navigation b uttons, then press ENTER. • The TIME ZONE will be set, then CLOCK menu will appear .
7 Select MANU AL using o o / p p navigation b uttons, then press ENTER. • The current time setting menu will appear . 8 Enter YEAR, D A TE, and TIME using o o / p p / s s / B B navigation b uttons or number b uttons. • Press ENTER to set each value, then the cursor will mov e to the next.
63 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 9 Press ENTER when the cursor is on SET . • Y our settings will be activ ated. 10 Press SETUP to exit SETUP men u. CLOCK QUIT CHANNEL DISPLA Y CLOCK DET AIL DST ON TIME ZONE CENTRAL MANUAL AUTO OFF 2002/ 3/31( SUN ) 1 52PM Activated ST201UB.
STB is capable of adjusting the clock automatically using the channel clock data included in the signal from digital broadcast sources. In this menu, STB will search for channels with clock data, then select a channel to adjust the clock. STB will then adjust the clock using the channel selected.
3 Select A UT O using o o / p p navigation b uttons, then press ENTER. • Auto clock setting menu will appear , then STB will start searching for channels with clock data. When not using the auto-cloc k setting: Select OFF from the channel-map, then press ENTER .
Y ou will need to change the 4-digit password to protect your V -CHIP/CC setting. “0000” has been stored as the default password. NO TE: Once the power supply is stopped due to the po wer f ailure or the unplugging AC po wer cord for approx. 5 seconds, the password will go back to the default password “0000.
3 Select V -CHIP/CC using o o / p p navigation b utton, then press ENTER. • V -CHIP/CC password window will appear . 4 Enter the default passw ord “0000. ” • “ * ” will appear for each digit. After entering the default password, V -CHIP/CC menu will appear .
5 Select NEW P ASSWORD using o o / p p navigation b uttons, then press ENTER. • P assword setting menu will appear . 6 Enter a new 4-digit pass wor d in the upper space, then enter again in the lower space to confirm. 7V -CHIP/CC menu will appear . • Y our new passw ord is stored.
69 EN 1A23 Adv anced Operation 5 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 In V -CHIP/CC menu, you will make some important settings for the viewing programs you select. First of all, you will need to set your 4-digit password for your V -CHIP setting.
1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DET AIL using o o / p p navigation b uttons, then press ENTER. • DET AIL menu will appear . 3 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER.
4 Enter y our 4-digit passwor d. • “ * ” will appear for each digit. After the correct password is entered, V -CHIP/CC menu will appear . 5 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER. • V -CHIP/CC setting menu will appear .
6 Select STB or TV using s s / B B navigation b uttons, then press ENTER. 7 Press SETUP to exit SETUP men u. V -CHIP / CC QUIT CHANNEL DISPLA Y CLOCK DET AIL V- C H IP / CC STB MP AA RA TING TV RA TING CC SELECTION OFF NEW P ASSWORD 72 EN 1A23 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 ST201UB.
The MP AA (Motion Picture Association of America) uses the standard movie ratings. 1,7 2,3,4,5,6 4 2,3,5,6 Age Label NR Not Rated by MP AA Description G General Audience PG Parental Guidance Suggested. Some material may not be suitable for children. NC-17 No one 17 and under admitted.
1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DET AIL using o o / p p navigation b uttons, then press ENTER. • DET AIL menu will appear . 3 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER.
4 Enter y our 4-digit passwor d. • “ * ” will appear for each digit. After entering the correct password, V -CHIP/CC menu will appear . 5 Select MP AA RA TING using o o / p p navigation b uttons, then press ENTER. • MP AA rating setting menu will appear .
76 EN 1A23 Adv anced Operation EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 6 Select PG-13 using o o / p p navigation b uttons, then press ENTER. E.g., when you want to bloc k all PG-13 movies: • Lock indicators will be added to programs rated PG-13 and abov e.
(TV Parental Guidelines) TV rating allows parents to block out programs the y don’t w ant their children to see. TV rating consists of the age labels and the content labels. The following are the descriptions for each label: NO TE: When you block a particular rating or content label, all categories abo ve that will also be blocked.
1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DET AIL using o o / p p navigation b uttons, then press ENTER. • DET AIL menu will appear . 3 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER.
4 Enter y our 4-digit passwor d. • “ * ” will appear for each digit. After the correct password is entered, V -CHIP/CC menu will appear . 5 Select TV RA TING using o o / p p navigation b uttons, then press ENTER. • TV rating setting menu will appear .
To set age-based ratings: E.g., when you want to bloc k all TV -14 programs 1. Select TV -14 using o / p navigation buttons, then press ENTER. • Lock indicators will be added to all TV -14 and higher categories. NO TE: All TV -14 and higher programs will be blocked, along with all the labels of their possible contents.
Closed Caption (CC) provides you with on-screen text v ersions of the audio content for the program being broadcast. In this menu, you are allowed to turn Closed Caption signal On or Off, to set a language for the closed caption and to choose a format for the closed caption.
3 Select V -CHIP/CC using o o / p p navigation b uttons, then press ENTER. • V -CHIP/CC password window will appear . 4 Enter y our 4-digit passwor d. • “ * ” will appear for each digit. After the correct password is entered, V -CHIP/CC menu will appear .
5 Select CC SELECTION using o o / p p navigation b uttons, then press ENTER. • CC options menu will appear . 6 Select the desired CC option using o o / p p navigation buttons, then press ENTER. • The selected CC option will be set. 7 Press SETUP to exit SETUP men u.
English, French, and Spanish are av ailable for the screen menu. Y ou can choose the language you prefer . NO TE: ENGLISH has been selected as the default before purchase. 1 Press SETUP to display SETUP men u. • SETUP menu will appear . Remote: Screen: 2 Select DET AIL using o o / p p navigation b uttons, then press ENTER.
3 Select MENU LANGU A GE using o o / p p navigation b uttons, then press ENTER. • Language menu will appear . 4 Select the desired language using o o / p p navigation b uttons (E.g., select French), then press ENTER. • The selected language will be set, and the selected language will be indicated on screen.
86 EN 1A23 Appendix EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 Symptom Remedy • Make sure that the AC po wer cord is securely plugged into the power outlet. • Make sure that STB is turned on. • Make sure to point the remote control unit at the remote control sensor .
87 EN 1A23 Appendix 6 Appendix and W arranty EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 • Make sure that the audio cable is correctly connected. • Make sure that audio de vices (stereo, TV , decoder) are turned on. • Make sure that audio de vices (stereo, decoder) are correctly set to STB audio output channel.
Product STB for A TSC/NTSC Connecting Jacks ANT IN F connector (75 ohm) Video Output (component) 3-pin jack (Y , Pb, Pr) S-Video Output Mini DIN 4-pin jack (75 ohm) Video Output 1-pin jack, 1Vpp Analog A udio Output 2-pin jack (L, R) 450 mVrms (100k ohm) Digital A udio Output 1-pin jack (Dolby Digital) Po wer Source 120 V A C+/-10 %, 60 Hz+/-0.
89 EN 1A23 Appendix 6 Appendix and W arranty EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 EN 1A23 Digital audio (coaxial) output jack: Digital audio (coaxial) output jack send digital audio data to audio devices equipped with a digital audio (coaxial) input jack.
90 ES 1A23 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 1 Botón PO WER: P ara encender y apagar el STB. 2 Indicador PO WER: Se ilumina cuando el STB está encendido. NO T A: Cuando se enciende el STB, el indicador PO WER primero parpadea y luego se ilumina de manera constante.
91 ES 1A23 Guía para rápida consulta 7 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 4B otones CH o / p : Presione este botón para cambiar de canal en dirección de ascenso o descenso.
92 ES 1A23 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 Conexiones de antena Use un cable de antena estándar para conectar la toma mural a la toma ANT IN del STB.
93 ES 1A23 Guía para rápida consulta 7 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 Conexión del STB a un SDTV utilizando la salida VIDEO P anel trasero del STB Cable.
94 ES 1A23 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ASISTENTE P ARA LA CONFIGURA CIÓN (SETUP WIZARD) El SETUP WIZARD es un práctico menú que le ayuda hacer los ajustes iniciales del STB.
95 ES 1A23 Guía para rápida consulta 7 Guía para rápida consulta ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 ES 1A23 8 Introduzca el año (YEAR), fecha (D A TE) y hora (TIME) utilizando los botones de navegación o o / p p / s s / B B o los botones n uméricos.
Printed in China ST201UB 0EMN02308 ***** LIMITED W ARRANTY FUN AI CORP . will repair this SYL V ANIA product, free of charge in the USA in the e vent of defect in materials or w orkmanship as follo ws: DURA TION: PA R TS: FUNAI CORP .
An important point after buying a device Sylvania 6900DTD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sylvania 6900DTD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sylvania 6900DTD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sylvania 6900DTD you will learn all the available features of the product, as well as information on its operation. The information that you get Sylvania 6900DTD will certainly help you make a decision on the purchase.
If you already are a holder of Sylvania 6900DTD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sylvania 6900DTD.
However, one of the most important roles played by the user manual is to help in solving problems with Sylvania 6900DTD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sylvania 6900DTD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
