Instruction/ maintenance manual of the product UVFR-600 Superior
Go to page of 12
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 1 36" & 42" Unvented Fireboxes P/N 700,018M REV. C 12/2003 UVFR-500 UVFC-500 UVFR-600 UVFC-600 MODELS ST ANDARD SERIES INST ALLA TION INSTRUCTIONS FOR USE ONLY WITH DECORATIVE TYPE UNVENTED ROOM HEATERS.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 2 WARNING: THESE BUILT-IN UN- VENTED FIREBOXES HAVE ONLY BEEN TESTED AND APPROVED FOR USE WITH ANSI Z21.11.2 UN- VENTED GAS LOGS. DO NOT ATTEMPT TO BURN SOLID WOOD FUELS, OTHER GAS LOG SETS OR ANY OTHER COMBUSTIBLE MATE- RIALS IN THIS UNVENTED FIREBOX.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 3 Use the following equations to determine if you have a confined or unconfined space. 1. Determine the volume of space — ft 3 . Length x Width x Height = _____ ft 3 (Include adjoining rooms with doorless pas- sageways or ventilation grills between rooms.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 4 WARNING: IF THE AREA IN WHICH THE HEATER MAY BE OPERATED IS SMALLER THAN THAT DEFINED AS AN UNCON- FINED SPACE, PROVIDE ADEQUATE COMBUSTION AND VENTILATION AIR BY ONE OF THE METHODS DESCRIBED IN THE NATIONAL FUEL GAS CODE, ANSI Z223.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 5 Install only a ¹⁄₂ " (1 ¹⁄₂ " max.) inside diameter approved gas line through the firebox wall for connection to the unvented room heater inside the firebox.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 6 UVF-500 SPECIFICATIONS Figure 4 Firebox Framing Construct firebox framing following Figures 6 through 8 and the chart on page 8 for your specific installation requirements. Refer to Figures 4 and 5 on pages 6 and 7 for firebox dimensions.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 7 Firebox Installation Note: The firebox must be installed giving full consideration to the clearance and height re- quirements identified in this manual. Step 1. Slide the firebox into prepared framing or position firebox in its final position and frame later.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 8 FRAMING SPECIFICATIONS Figure 6 Figure 7 Figure 8 Opening UVF-500 UVF-600 A 41 ¹⁄₄ " 46 ¹⁄₄ " B 37 ¹⁄₂ " 43 ¹⁄₂ &qu.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 9 Step 2. Align the canopy with the holes in the top frame. Step 3. Replace the screws previously removed.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 10 ACCESSORIES AND COMPONENTS Blower Kits -Single Speed 80L84 FBK-100 -Variable Speed 80L85 FBK-200 (FBK-200 Models Only) Decorative Volcanic Stone 80L42 FDVS Decorative Volcanic Stone The decorative volcanic stone, Model FDVS, can be used to enhance the look of your appli- ance.
NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE. 11 REPLACEMENT PARTS UVF-500 UVF-600 No. DESCRIPTION Part No. Qty. Part No. Qty. Gas Fireplace Assembly – – – – 1. Firescreen 36L89 2 36L99 2 2. Rod, Screen 88L95 2 88L96 2 3. Refractory, Side 88L59 2 88L65 2 4.
Printed in U.S.A. © 2000 by LHP P/N 700,018M REV. C 12/2003 The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information.
An important point after buying a device Superior UVFR-600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Superior UVFR-600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Superior UVFR-600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Superior UVFR-600 you will learn all the available features of the product, as well as information on its operation. The information that you get Superior UVFR-600 will certainly help you make a decision on the purchase.
If you already are a holder of Superior UVFR-600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Superior UVFR-600.
However, one of the most important roles played by the user manual is to help in solving problems with Superior UVFR-600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Superior UVFR-600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
