Instruction/ maintenance manual of the product SSDVR-3530CNE Superior
Go to page of 28
HOMEOWNER'S CARE AND OPERA TION INSTRUCTIONS Millivolt Models Electronic Models MODELS DIRECT VENT SSDV -35/40 SERIES A French manual is available upon request. Order P/N 725,033CF Ce manuel d’installation est disponible en francais, simplement en faire la demande.
2 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. A VER TISSEMENT Ne pas se servir de cet appareil s'il a été plongé dans l'eau, complètement ou en partie. Appeler un technicien qualifi é pour inspecter l'appareil et rem- placer toute partie du système de contrôle et toute commande qui ont été plongés dans l'eau.
3 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. CONGRA TULA TIONS! In selecting this SUPERIOR Direct-Vent Gas Appliance you have chosen the fi nest and most dependable fi replace to be found anywhere. A beautiful, prestigious, alternative to a wood burning fi replace.
4 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. Inlet Gas Supply Pressure (all models) Fuel # Minimum Maximum Natural Gas 5.0" WC (1.24 kPa) 10.
5 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. If your millivolt appliance is equipped with an optional remote switch kit (wall switch, remote control or wall thermostat) and the pilot is lit, the appliance main burner may be turned on and off using the optional switch.
6 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. W ARNING T urn off gas and electrical power before servicing the appliance. CAUTION Wear gloves and safety Glasses for protection while doing required maintenance . IMPOR T ANT Always verify proper operation after servicing.
7 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. Do not attempt to repaint the appliance until the fi nish is completely cured (see Burn-In Period on Page 4 ) . If the surface later becomes stained or marred, it may be lightly sanded and touched up with spray paint.
8 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. W ARNING The size and position of the log set was engineered to give the appli- ance a safe, reliable and attrac- tive fl ame pattern. Any attempt to use a different log set in the fi replace will void the warranty and will result in incomplete combustion, sooting, and poor fl ame quality .
9 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. Figure 8 MODEL SSDV-3530 Log Placement Instructions LOG SET Catalog Number H3367 * Item Description A Log, Rear B Log, T op Left C Log, Center D Log.
10 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. Figure 9 LOG SET Catalog Number H3368 * Item Description A Log, Rear B Log, T op Left C Log, Center D Log, T op Right * Item "letters" ab.
11 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. Figure 10 - Burner Flame Appearance Models SSDV-3530 & SSDV -4035 Series BURNER ADJUSTMENTS (QUALIFIED TECHNICIANS ONL Y) Flame Appearance and Sooting Proper fl ame appearance is a fl ame which is blue at the base and becomes yellowish-orange in the body of the fl ame.
12 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. Figure 11 Burner Air Shutter Adjustment Adjustment Rod Up (Fully Open Position) Air Shutter Adjustment Rod Down (minimum air opening position) Burner T ube Adjustment Setscrew Electronic Appliance Checkout To light the burner, refer to the lighting instruc- tions on Pages 19 & 20 .
13 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. WARRANTY Y our gas appliance is covered by a limited twenty year warranty . Y ou will fi nd a copy of the war- ranty accompanying this manual. Please read the warranty to be familiar with its coverage.
14 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. Standard Remote Control System The Model RCL (Standard) Remote Control System, features a simplistic OFF/ON control function for the fi replace. This model includes a hand-held transmitter , a remote receiver with wall-mount cover plate and all hardware required to install the unit.
15 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. ACCESSORY COMPONENTS Interior Brick Liner Kits The brickade liner kits include tan stamped sheetmetal panels for the rear and side walls of the fi rebox. The panels have brick-like features in relief.
16 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. Forced Air Kit The FBK-100 blower provides constant velocity forced air circulation. The FBK-200 assembly with variable speed, wall-mountable switch provides variable speed forced air cir culation.
17 LIGHTING INSTRUCTIONS – HONEYWELL AND SIT MILLIVOL T GAS VAL VE WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTL Y , A FIRE OR EXPLOSION MA Y RESUL T CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. FOR YOUR SAFETY READ BEFORE LIGHTING A.
18 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. INSTRUCTIONS D’ALLUMAGE – VANNE GAZ MILLIVOLT HONEYWELL ET SIT INSTRUCTIONS D'ALLUMAGE 8. Enfoncez le bouton de réglage jusqu’au fond et gardez-le enfoncé.
19 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTL Y , A FIRE OR EXPLOSION MA Y RESUL T CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. A. When lighting the appliance, follow these instructions exactly .
20 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. INSTRUCTIONS D’ALLUMAGE — ELECTRONIC INSTRUCTIONS D’ALLUMAGE POUR VOTRE SÉCURITÉ, LISEZ CES INSTRUCTIONS AVANT L ’ALLUMAGE A. Lorsque vous allumez l’appareil, suivez exactement ces instruc- tions.
21 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. MAINTENANCE T ASK ACCOMPLISHING PERSON PROCEDURE Inspecting/Cleaning Burner , Logs and Controls Qualifi ed Ser vice T echnician Inspect valve and ensure it is properly operating. Check piping for leaks.
22 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. TROUBLESHOOTING GUIDE - MILLIVOL T GAS CONTROL SYSTEM Note: Before troubleshooting the gas control system, Ensure external gas shut off valve, located at gas supply inlet, (and wall switch, iff applicable), is in the “ON” position.
23 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. ST ART CHECK • T urn Off Gas Supply . • Ensure Valve Switch Is In ON Position. • Disconnect Control Harness. • Set Thermostat T o Call For Heat. • Check for proper volt- age at control harness (see insert A).
24 Item # Description SSDV-3530 SSDV-4035 Part No. Qty . Part No. Qty . 1 Hood, Charcoal 97K51 1 97K52 1 2 Louver Assembly, T op, Charcoal H3376 1 H3377 1 3 * Louver Assembly, Bottom, Charcoal H3379 1.
25 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. REPLACEMENT P ARTS DIAGRAMS 7 1 2 11 12 15 14 6 21 13 3 17 20 18 16 19 4 26 27 28 29 25 24 32 31 34 30 22 33 23 8 5 9 10.
26 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. NOTES.
27 NOTE: DIAGRAMS & ILLUSTRA TIONS NOT TO SCALE. NOTES.
Printed in U.S.A. © 2005 by LHP P/N 725,033M REV . D 05/2006 LHP reserves the right to make changes at any time, without notice, in design, materials, specifi cations, prices and also to discontinue colors, styles and products. Consult your local distributor for fi replace code information.
An important point after buying a device Superior SSDVR-3530CNE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Superior SSDVR-3530CNE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Superior SSDVR-3530CNE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Superior SSDVR-3530CNE you will learn all the available features of the product, as well as information on its operation. The information that you get Superior SSDVR-3530CNE will certainly help you make a decision on the purchase.
If you already are a holder of Superior SSDVR-3530CNE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Superior SSDVR-3530CNE.
However, one of the most important roles played by the user manual is to help in solving problems with Superior SSDVR-3530CNE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Superior SSDVR-3530CNE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
