Instruction/ maintenance manual of the product Speaker Sunfire
Go to page of 4
1 Assembly Guide Introduction Thank you for purchasing this Sun fi re loudspeaker stand. It has been designed as a perfect match for the CRM-2 satellite loudspeakers – following the cabinet's taper and producing an elegant, one-piece look. A high-gloss lacquered base and column ensures that form meets function.
2 Assembly Guide Stand Assembly T ools required: • Allen wrench supplied Preliminary steps: • Run the loudspeaker cables to each location, so these can be fi tted to the loudspeaker during the assembly of the stand. • Unpack your CRM-2 loudspeaker , and get it ready for use.
3 Assembly Guide 9. Line up the screw on the adapter plate with the keyhole lock on the column. Line up the screw with keyhole bracket 10. Place the speaker adapter plate assembly onto the column. 7. Slide the speaker adapter plate assembly forward in the keyhole to secure it in place 8.
The loudspeaker binding post accept bare wire, pins, spades, single and dual-banana plugs. Always use high quality connections and speaker wires, and make sure there are no loose fi ttings or stray wire strands. Connect the positive speaker-level output of your power ampli fi er or receiver to the positive (red) input of the loudspeaker .
An important point after buying a device Sunfire Speaker (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunfire Speaker yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunfire Speaker - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunfire Speaker you will learn all the available features of the product, as well as information on its operation. The information that you get Sunfire Speaker will certainly help you make a decision on the purchase.
If you already are a holder of Sunfire Speaker, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunfire Speaker.
However, one of the most important roles played by the user manual is to help in solving problems with Sunfire Speaker. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunfire Speaker along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
