Instruction/ maintenance manual of the product 2356 Sunbeam
Go to page of 14
Instruction Manual DELUXE MIXMAS TER ® MIXER Mode d'Emploi BA T TEUR DELUXE MIXMAS TER ® Manual de Iinstrucciones BA TIDORA MIXMASTER® DELUXE Instruzioni per l'Uso DELUXE MIXMAS TER ® MI.
2 When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions before using the Mixer . 2. T o protect against risk of electrical shock, do not put Mixer in water or other liquid.
11, Do not place Mixer or bowls on or near a hot gas or electric burner, or in a heated oven. 12. Do not use Mixer for other than intended use. 13. Do not leave Mixer unattended while it is operating .
3 1. Beater Ejector 2. Large Mixing Bowl 3. Small Mixing Bowl 4. Bowl-Fit Beaters 5. T urntable 6. Dough Hooks 7. Stand 8. Worklight * 9. Mixer -Release T rigger 10. Mix-Finder ® Dial 11 . Mixing Guide * Some models do not have the worklight feature .
4 A S SEMBLING THE S T AND M IXER Before assembling the mixer , be sure the Mix-Finder ® dial is in the ZERO position and the electric cord is unplugged. A T T ACHING THE T URNT ABLE Place the revolving turntable into the base of the stand using the socket corresponding to the size of the bowl.
5 At t aching the Beaters Be sure the Mix-Finder ® dial is in the ZERO position and unplug electric cord from the electrical outlet. Lift mixer head up and back to pull it out of the way of the bowl, while holding in an upright position. NOTE: It is important that the beaters go into the correct sockets.
6 The dough hook with the small washer and foot goes into the socket on the side of the mixer nearest the side of the bowl. The other dough hook with the large washer goes into the socket nearest the center of the bowl. See the dough hook symbols located on the front of the mixer head.
7 NOTE: Due to variations in ingredient temperatures and quantities, the Mixing Guide speeds are only suggested. If necessary , adjust speeds as needed to achieve desired results. Mixing Guide The mixing guide on your mixer has been designed to help you take the guess work out of preparing foods.
8 C ARING FOR YOUR MIXER E JEC TING THE B E A TERS OR D OUGH H OOKS After you’ve finished mixing, turn the Mix-Finder ® dial to OFF and unplug the electric cord from the electrical outlet. Push the ejector button located near the handle to remove beaters or dough hooks.
9 NOTE: Replacement bulbs may be purchased from local hardware or department stores or from your nearest authorized Sunbeam Service Center (6 watt maximum bulb can be used.) T o replace the worklight lens, repeat the steps described in “T o remove the worklight lens” in reverse order .
10 BRE ADS Special Instruc tions for Making Kneaded Bre ads When making kneaded breads, your mixer will require more care than when making ordinary mixtures, such as cake batter and cookie dough. The elasticity of the bread dough and the shape of the dough hooks may cause your mixer to do some unusual things.
11 H OW T O S HAPE D OUGH FOR A L OAF P AN 1. Using a rolling pin, roll dough into a rectangle. 2. Roll dough into a loaf, starting from narrow end. 3. Flatten ends with sides of hands, as shown. 4. Pinch along seam to seal. 5. Fold ends under and place seam-side down in a well-greased loaf pan.
&YEAR ~IITED W ARRANTY Sunbeam Products Inc. warrants that, for a period of two years from date of purchase, this product shall be free of mechanical and electrical defects in material and workmanship.
©1997 Sunbeam Corporation or its affiliated companies. All rights reserved. Sunbeam, ® Mixmaster , ® Mix-Finder ® and Burst of Power ® are registered trademarks of Sunbeam Corporation or its affiliated companies.
An important point after buying a device Sunbeam 2356 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam 2356 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam 2356 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam 2356 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam 2356 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam 2356, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam 2356.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam 2356. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam 2356 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
