Instruction/ maintenance manual of the product FF1152SS Summit
Go to page of 14
W rite the Model and Serial Num bers here: _________ ________ _______ _ _________ ________ _______ _ FROST-FREE REFRIGERATOR-FREEZER Models CM40 5 CM411 L CM421BL Owner's Manual BEFORE USE, PLE ASE RE AD AND FOLLOW ALL SAFETY RULE S AND OPER A TING IN STRUCT IONS FELIX STORCH, INC.
1 IMPORT A NT SAFEGUA RDS Your safety and the safet y of others are ve ry important. W e have provided m any im portant safet y m essages in this m anual and on your applianc e. Always read and obe y all safety mess ages. This is the Safet y Alert Symbol.
2 Use two or m ore people to move and install the ref rigerator . Failure to do so ca n result in back or other injur y. To ensure proper ve ntilation for your refrigerator, the f ront of the unit m ust be completel y unobstructed. Choose a well-v entilated area with temperatures above 60 ° F (16 ° C) and below 90 ° F (32 ° C).
3 Table of Contents Important Safegua rds .................................................................................................... 1 - 2 Location of Parts ....................................................................................
4 Technical Information Models: FF 1112 W (white) FF1112BL (black) FF 1152SS (black cabinet with stainless steel door ) Capacity: 10.3 cubic feet Electrical Input: 11 5V AC / 60Hz Rated Current: 1. 6A Energy Consumption: 309 kW h/yr Energy Star approved: Yes Refrigerant: R134a , 5.
5 Imp roper use of the grou nded plug can result in the risk of electrical shoc k. If the power cord is damaged , have it replaced b y an authoriz ed service center. may increase electrical consumption. Extreme ly cold amb ient temper atures may also affect the unit 's performance.
6 Reversing the Door Swing: The doors of the refrigerator-freezer can be hinged on either side so that the door swing can be suited to the location of the installation.
7 5. Tilt the refrigerator back or lay it on its back for steps 6, 7 and 8. Use a pad or blanket to protect the floor and to avoid scratching the painted finish. 6. Remove the leveling legs by turning them counterclockwise. Remove the lower hexagonal-head screws, two on the hinge side and one near the front corner of the other side.
8 Operating Your Refrigerator Setting the Temperature Controls: Your unit has one control for regulating the temperature in the refrigerator compartment and a separate one for the freezer. Refrigerator: The refrigerator compartment's temperature control (thermostat) is a dial type located at the top center of the compartment.
9 behind the wall). During the compressor's off-cycle, the ice will melt, drip down, and drain through a small hole behind the crisper into a tray abov e the compressor where the compressor's heat evaporates the w ater.
10 Care and Maint enance Cleaning Your Refrigerator: 1. U npl ug the unit and re move the food , shelves and crisper. 2. Wash the inside surfaces with a solution of warm water and baking soda. The solution should contain about 2 tablespoons of baking soda to a quar t of water.
11 Moving Your Unit: 1. Remove all the food. 2. Securely tape down all loose items inside y our unit. 3. Turn the leveling legs up to the base to av oid damage. 4. Tape the doors shut. 5. Be sure the unit stays secure in the upright position during transport ation.
12 Troubleshooting You can easily solve many common problems with y our appliance , saving you the cost of a possible service call. Try the sug gestions below to see if you can correct the problem before calling the service provider. TROUBLESHOOTIN G GUIDE Problem Possible Cause Unit does not operate.
13 For parts and access ory ordering, troubleshooting and hel pful hints, visit: www.sum mitappliance.com/sup port Limited Warranty ONE-YEAR LIMITED WARRANTY W ithin the 48 contiguous United States, f.
An important point after buying a device Summit FF1152SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Summit FF1152SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Summit FF1152SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Summit FF1152SS you will learn all the available features of the product, as well as information on its operation. The information that you get Summit FF1152SS will certainly help you make a decision on the purchase.
If you already are a holder of Summit FF1152SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Summit FF1152SS.
However, one of the most important roles played by the user manual is to help in solving problems with Summit FF1152SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Summit FF1152SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
