Instruction/ maintenance manual of the product E323 Summit
Go to page of 11
Disassembly Instructions Lexmark E-321/E323 Toner Cartridge First released in April, 2003, the Lexmark E321/323 series of printers are based on a 20ppm 1200 dpi Lexmark engine. Lexmark is using the Prebate cartridges again, and these cartridges also use a non-resetable chip to prevent the Prebate car - tridges from being recycled.
DOC-0331 Page 2 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) These cartridges come new with a shipping lock/foam combination. The shipping lock and foam are unique to the E320/321 series of cartridges. See Figure 1 Required Tools Toner approved vacuum.
DOC-0331 Page 3 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) Figure 2 Figure 3 Figure 4 Figure 5 1) On the left side of the cartridge (Chip Side) remove the 3 screws. See Figure 2 2) Carefully remove the end cap. Note that a spring will come loose and the cartridge will basically fall apart at this point.
DOC-0331 Page 4 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) Figure 6 Figure 7 Figure 8 Figure 9 5) Remove the two front screws only from the right end cap. The back screw holds the long brace in place and does not need to be removed.
DOC-0331 Page 5 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) Figure 10 Figure 11 Figure 12 Figure 13 7) Remove the two screws on the wiper blade, and the blade. Clean out the waste chamber. The screws for the wiper blade are smaller than the end cap screws.
DOC-0331 Page 6 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) Figure 14 Figure 15 Figure 16 Figure 17 11) On the left side of the toner hopper (fill plug side), pry out the developer roller bushing. See Figure 14 12) Remove the developer roller.
DOC-0331 Page 7 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) Figure 18 Figure 19 Figure 20 Figure 21 15) Fill the hopper with 225g of E320 toner. Replace the fill plug. See Figure 18 16) Install the doctor blade spring holder, spring and screw.
DOC-0331 Page 8 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) Figure 22 Figure 23 Figure 24 Figure 25 19) Install the spring large loop side on the large toner hopper post. See Figure 22 20) Install the coupler gear on to the shaft on the toner supply.
DOC-0331 Page 9 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) Figure 26 23) If you have a Prebate cartridge, install the replacement chip in the left end cap.
DOC-0331 Page 10 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) Figure 30 Figure 31 26) Carefully align and install the left end cap. Make sure the back brace fits correctly and that the alignment pins are all in there correct position.
DOC-0331 Page 11 www.summitlaser.com Lexmark E-321/E323 Toner Cartridges (Continued) Figure 34 Figure 35 29) With the springs in the correct position, bend the drum cover slightly in the middle. Place the alignment pins in their respective slots. Try to make sure the large tail of the spring fits in place as you fit the cover in place.
An important point after buying a device Summit E323 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Summit E323 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Summit E323 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Summit E323 you will learn all the available features of the product, as well as information on its operation. The information that you get Summit E323 will certainly help you make a decision on the purchase.
If you already are a holder of Summit E323, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Summit E323.
However, one of the most important roles played by the user manual is to help in solving problems with Summit E323. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Summit E323 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
