Instruction/ maintenance manual of the product SHS62A Stow
Go to page of 68
Re vision #0 (06/02/06) SideWinder MODEL SHS62A CUT -OFF SA W THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. OPERA TION & P AR TS MANUAL.
Engine e xhaust and some of its constituents, and some dust created of Calif ornia to cause cancer , bir th defects and other repr oductive harm. b y po wer sanding, sa wing, grinding, drilling and other construction activities contains chemicals kno wn to the State Some e xamples of these chemicals are: Lead fr om lead-based paints.
NO TE P A GE.
P A GE 4 — SHS62A CUT -OFF SA W — OPERA TION & P AR TS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — T ABLE OF CONTENTS STOW — SHS62A CUT -OFF SA W Proposition 65 W ar ning ............................................. 2 T ab le Of Contents .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 5 When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ Dealer account number ❒ ❒ .
P A GE 6 — SHS62A CUT -OFF SA W — OPERA TION & P AR TS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — SAFETY MESSA GE ALERT SYMBOLS Safety precautions should be followed at all times when operating this equipment.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 7 Accidental Starting AL W A YS place the engine ON/OFF switch in the OFF position, when the saw is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine gov e rnor or settings.
P A GE 8 — SHS62A CUT -OFF SA W — OPERA TION & P AR TS MANU AL — REV . #0 (06/02/06) SAFETY ■ DO NOT operate or service this equipment before reading this entire manual . ■ This equipment should not be operated by persons under 18 years of age.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 9 ■ AL W A YS wear proper respirator y (mask), hear ing and e ye protection equipment when operating the saw . ■ AL W A YS hold the sa w with both hands when the engine is running.
P A GE 10 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — RULES FOR SAFE OPERA TION ■ NEVER leave the machine unattended while running. ■ NEVER run the engine without the air filter . Sev ere engine damage could occur .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 11 SHS62A CUT -OFF SA W — RULES FOR SAFE OPERA TION EMERGENCIES ■ AL W A YS know the location of the nearest fire extinguisher . ■ AL W A YS know the location of the nearest first aid kit .
P A GE 12 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — SPECIFICA TIONS s n o i t a c i f i c e p S e c r u o S r e w o P A 2 6 S H S . 2 e l b a T e p y T e n i g n Ed e l o o c r i A , r e d n i l y C e l g n i S , e k o r t S - o w T t n e m e c a l p s i D) .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 13 SHS62A CUT -OFF SA W — DECAL PLA CEMENT Machine Operation And Safety Decals The SHS62A CUT -OFF SA W is equipped with a number of operation and safety decals (Figure 1).
P A GE 14 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CONTROLS & COMPONENTS 7. Roller Wheel – Allo ws for easy free mo vement of the sa w when cutting on a flat surface. 8. V -belt Cover (Clutch) – Unscrew these 2 nuts to remo v e the clutch V -belt cov e r .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 15 SHS62A CUT -OFF SA W — CONTROLS & COMPONENTS 13. Blade Guard – Covers saw blade. 14. Front Handle – When lifting or carrying of the saw is required, use this handle.
P A GE 16 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) The Stow Side Winder Cut-Off Saw comes with a T ool Kit (Figure 4) that assists you with da y to da y operations. Y ou will need these tools f or the assemb ly of y our sa w .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 17 SHS62A CUT -OFF SA W — W A TER KIT INST ALLA TION INSTRUCTIONS Figure 9.
P A GE 18 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) W ARNING F ailure to thoroughly inspect the diamond blade (Figure 12) for operational safety could result in damage to the blades or the saw and may cause injury to the user or others in the operating area.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 19 The CLOSED position of the choke lever enriches the fuel mixture for starting a COLD engine. The OPEN position provides the correct fuel mixture for normal operation after starting, and for restarting a warm engine.
P A GE 20 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) Shut-down 1 . Let the engine idle for 3-5 minutes. 2 . Place the engine ON/OFF switch to the OFF position 3 . W ait for the b lade to stop spinning before handling the saw .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 21 SHS62A CUT -OFF SA W — MAINTENANCE Figure 17. Drive V -Belt Figure 14. Belt Guard Cover Removal Remove the 2 hex nuts L and hex screw and washer M to gain access to the V -belt on the clutch side.
P A GE 22 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) Figure 19. Re-Installing Cover Guard Re-install the guard K and V -belt T co vers . Fully tighten the two cap screws J and reinstall the adjustment knob I .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 23 Reversing the Cutting Arm Procedure NOTE This assembly procedure permits the operator to reorient the cutting blade closer to a wall, column and/or object.
P A GE 24 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) Reverse the cutting arm 180 degrees as shown in the Figure 23, and re-tension the V -belt by turning the belt tensioning cam O . The V -belt should remain in tension.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 25 SHS62A CUT -OFF SA W — MAINTENANCE (AIR/FUEL FIL TER) Figure 25. Fuel Filter Air/Fuel Filter Maintenance Procedures Check the fuel filter G located inside the fuel tank periodically for dirt/debris build up.
P A GE 26 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — TROUBLESHOO TING (BLADE) G N I T O O H S E L B U O R T E D A L B . 3 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 27 SHS62A CUT -OFF SA W — TR OUBLESHOO TING (ENGINE) ) E N I G N E ( G N I T O O H S E L B U O R T . 4 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S o n t u b , e l b a l i a v a s i l e u f " , t r a t s o t t l u c i f f i D .
P A GE 28 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — TROUBLESHOO TING (ENGINE) ) D E U N I T N O C , E N I G N E ( G N I T O O H S E L B U O R T .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 29 HS62FK1A [ Includes 1 ea.] HS52020270R- Foam Filter HS018600125R- Paper Filter HS018600056AR - Inner Filter HS62FK5A [ Includes 5 ea.] HS52020270R- Foam Filter HS018600125R - Paper Filter HS018600056AR - Inner Filter HS62FK10A [ Includes 10 ea.
P A GE 30 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) The contents and part numbers listed in the parts section are subject to change without notice . Stow does not guarantee the availability of the parts listed.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 31 SHS62A CUT -OFF SA W — SUGGESTED SP ARE P ARTS SUGGESTED SP ARE P AR TS SHS62A SIDEWINDER CUT -OFF SA W 1 to 3 Units Qt y . P/ N Description 1 ............ HS52022011A .
P A GE 32 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — MUFFLER ASSY . MUFFLER ASSY ..
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 33 MUFFLER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * HS3801052 SCREW 3 2 * HS3033074 W ASHER 5 3 * HS500.
P A GE 34 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — RECOIL ST ART ASSY . RECOIL ST AR T ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 35 RECOIL ST AR T ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 14 * HS50140060 HANDLE, ST AR TER ROPE 1 15 * HS.
P A GE 36 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CRANKCASE ASSY . CRANKCASE ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 37 CRANKCASE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 3 HS52010312 P LA T E 1 1 1 HS52020014 GROMMET 1 1 2 HS52020040 C A P 1 1 6 HS50010047AR GASKET , CRANKCASE 1 1 8 HS52020273 CRANKCASE W/ BEARING ASSY .
P A GE 38 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — V -BEL T CO VER (CLUTCH SIDE) ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 39 V -BEL T CO VER (CLUTCH SIDE) ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 40 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — V -BEL T CO VER (PULLEY) /BLADE GU ARD ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 41 V -BEL T CO VER (PULLEY -SIDE)/BLADE GUARD ASSY . NO . P AR T NO .
P A GE 42 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — FUEL T ANK ASSY . FUEL T ANK ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 43 SHS62A CUT -OFF SA W — FUEL T ANK ASSY . FUEL T ANK ASSY . NO .
P A GE 44 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — LIFTING HANDLE AND ROLLER ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 45 LIFTING HANDLE AND R OLLER ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 46 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — THRO TTLE LINKA GE ASSY . THRO TTLE ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 47 THRO TTLE ASSY NO . P AR T NO . P AR T NAME QTY . REMARKS 1 0 HS52010092 TH RO TTLE TRIGGER LEVER .
P A GE 48 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — FL YWHEEL CO VER ASSY . FL YWHEEL CO VER ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 49 FL YWHEEL CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 3 HS005000361 W ASHER, FLA T 1 4 HS3833080 W ASHER, LOCK 1 5 HS004000142 N UT 1 6 HS500110019A FLANGE, ST ARTER 1 SHS62A CUT -OFF SA W — FL YWHEEL CO VER ASSY .
P A GE 50 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — FL YWHEEL ASSY . FL YWHEEL ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 51 FL YWHEEL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS52020247R FL YWHEEL ................................................ 1 ......... INCLUDES ITEM W/ * 2 * HS52012027 P AWL S ET 1 SHS62A CUT -OFF SA W — FL YWHEEL ASSY .
P A GE 52 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — IGNITION COIL ASSY . IGNITION COIL ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 53 IGNITION COIL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 7 * HS094600169 SPRING SP ARK PLUG 1 8 * HS094600.
P A GE 54 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — AIR FIL TER ASSY . AIR FIL TER ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 55 AIR FIL TER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS52012024B FLANGE, PRE- FIL TER, CAP 1 2 HS330000010 O - RING, FLANGE PRE- FIL TER 2 3 HS018600125R FI L TER, AIR (ST AND ARD) 1 3A HS099900778A FI L TER, AIR (WET CUTTING) .
P A GE 56 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CARB URET OR MOUNTING ASSY . CARBURET OR MOUNTINGASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 57 CARBURET OR MOUNTING ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 6 HS3833073 W ASHER 2 1 1 HS52020060 SPRIN.
P A GE 58 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CARBURET OR ASSY . CARBURET OR ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 59 SHS62A CUT -OFF SA W — CARBURET OR ASSY . CARBURET OR ASSY . NO .
P A GE 60 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CRANKSHAFT / PIST ON ASSY . CRANKSHAFT AND PIST ON ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 61 CRANKSHAFT AND PIST ON ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 62 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — W A TER KIT ASSY . W A TER KIT ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 63 SHS62A CUT -OFF SA W — W A TER KIT ASSY . W A TER KIT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS52012062 W A TER KIT ASSY . ..........................
P A GE 64 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — T OOLS T OOLS.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 65 SHS62A CUT -OFF SA W — T OOLS T OOLS NO . P AR T NO . P AR T NAME QTY .
P A GE 66 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) Recommended Diamond Blades for Y our Saw Side Winder Aspha lt G r een C oncre te Light We ight Bloc k C o.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 67 Effective: July 15, 2003 TERMS AND CONDITIONS OF SALE — P AR TS T erms and Conditions of Sale STOW Construction.
OPERA TION AND P ARTS MANUAL HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PAR TS DEP ARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 .
An important point after buying a device Stow SHS62A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stow SHS62A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stow SHS62A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stow SHS62A you will learn all the available features of the product, as well as information on its operation. The information that you get Stow SHS62A will certainly help you make a decision on the purchase.
If you already are a holder of Stow SHS62A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stow SHS62A.
However, one of the most important roles played by the user manual is to help in solving problems with Stow SHS62A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stow SHS62A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
