Instruction/ maintenance manual of the product MS120H13 Stow
Go to page of 92
OPERA TION AND P AR TS MANUAL THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. Re vision #0 (07/10/08) MODEL MS120H13 MECHANICAL DUMP MODEL MS120HD13 HYDRAULIC DUMP HYDRAULIC PLASTER/MOR T AR MIXERS (HONDA GX390 GASOLINE ENGINE) T o find the latest revision of this publication, visit our website at: www .
P A GE 2 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) Engine exhaust and some of its constituents, and some dust created of California to cause cancer , birth defects and other repr oductive harm.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 3 Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica.
P A GE 4 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) T ABLE OF CONTENTS Specifications and part numbers are subject to change without notice . In accordance with our established policy of constant improvement, we reserve the right to amend these specifications at any time without notice.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 5 P ARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: WE ACCEPT ALL MA.
P A GE 6 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) FOR Y OUR SAFETY AND SAFETY OF O THERS! Safety precautions should be followed at all times when operating this equipment. F ailure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 7 SAFETY CA UTION — Eye and Hearing Hazar ds AL W A YS wear approv ed ey e and hear ing protection. CA UTION — Rotating P arts Hazards NEVER operate equipment with covers or guards remov ed.
P A GE 8 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) RULES AND REGULA TIONS NEVER touch the hot exhaust manifold, muffler or cylinder . Allow these par ts to cool before servicing engine or pump. AL W A YS allow the engine to cool bef ore adding fuel or performing service and maintenance functions.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 9 RULES AND REGULA TIONS When towing, an adequate safety chain must be f astened to the frame . See T owing Guidelines section in this manual. K eep all inexperienced and unauthorized people a wa y from the equipment at all times.
P A GE 10 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) EMERGENCIES AL W A YS know the location of the nearest fire extinguisher . AL W A YS know the location of the nearest first aid kit . In emergencies, always know the location of the nearest phone or keep a phone on the job site .
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 11 TOWING GUIDELINES TO WING SAFETY PRECA UTIONS The following list of suggestions should be used when towing the mixer: Check with your county or state safety towing regulations depar tment before to wing your mixer .
P A GE 12 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) Reference Figure 1 for the installation of the safety chain . TO W BAR T O MIXER CONNECTION 1. Inser t the tow bar through the round opening at the bottom of the mixer stand.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 13 SPECIFICA TIONS r e x i M s n o i t a c i f i c e p S 1 e l b a T l e d o M r e x i My t i c a p a C m u r D ) s r e t i l ( t f . u c y t i c a p a C m u r D ) . g k 2 4 ( .
P A GE 14 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) Figure 2. Dimensions DIMENSIONS s n o i s n e m i D . 3 e l b a T n o i t p i r c s e D) m c ( . n i s n o i s n e m i D h t g n e L ) r a B w o T / w ( ) m c 0 7 1 ( .
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 15 GENERAL INFORMA TION Application The Stow MS120 series hydraulic mixers (drum capacity 12.0 cu. ft./340 liters) are shipped completely assembled and have been factory tested and are ready for use.
P A GE 16 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) MIXER COMPONENTS Figure 3. Mixer Components (Wheels) Figures 3 and 4 illustrate the basic components and controls of the MS120 series hydraulic mixer 1. Tires — Replace with manufacturer recommeded tires only .
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 17 MIXER COMPONENTS/HYDRAULIC COMPONENTS 17. Adjustable Stabilizer Jack Stands — Use these jack stands (3) to adjust the mixer to the desired height.
P A GE 18 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) ENGINE COMPONENTS Figure 6. Engine Controls and Components INITIAL SER VICING The engine (Figure 6) must be checked for proper lubrication and filled with fuel prior to operation.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 19 Figure 7. Paddle Blade Adjustment (Steel Drum) Adjust paddles as shown in Figure 7.
P A GE 20 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) INSPECTION This section is intended to assist the operator with the inspection of the h ydraulic mix er . It is extremely impor tant that this section be read carefully before attempting to use the mixer in the field.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 21 INSPECTION HYDRA ULIC OIL Check hydraulic oil sight gauge (Figure 10) to ensure that hydraulic oil is at the midway level. HYDRA ULIC HOSES Check hydraulic hoses to make sure they are not worn, frayed or defective.
P A GE 22 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) INITIAL ST ART -UP ST ARTING THE ENGINE The f ollowing steps outline the procedure f or star ting the engine. Depending on the type of engine employed in the mix er the steps ma y v a r y slightly .
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 23 INITIAL ST ART -UP /OPERA TION When the drum lock lever is placed horizontally , the dr um will be maintained in the v er tical position as the paddles rotate. This condition does not apply to models that hav e hydr aulic dump capability .
P A GE 24 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) OPERA TION DUMPING (MANU AL) 1. Release drum lock lever by pushing lever into vertical position (Figure 22). 2. Pull dump handle downward to discharge (empty) the drum.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 25 SHUT -DOWN ST OPPING THE MIXER 1. Push the start/stop switch (Figure 26) inward to stop the engine. 2. Place the fuel valve (Figure 27) lever to the OFF position. 3.
P A GE 26 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) Use T able 6 as a general maintenance guideline when servicing your engine . F or more detail engine maintenance inf ormation, refer to the engine owner's manual supplied with your engine.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 27 MAINTENANCE P erf or m the scheduled maintenance procedures as defined b y T able 8 and below: Daily ■ Thoroughly remov e dir t and oil from the engine and control area.
P A GE 28 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) DRUM HEAD SEALS There is 1 set of drum head seals (Figure 31) that will require lubrication. Lubricate the grease fitting for each drum seal after each use using any grade lithium base grease.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 29 TIRES/WHEELS/LUG NUTS Tires and wheels are a v er y impor tant and critical components of the trailer . When specifying or replacing the trailer wheels it is impor tant the wheels, tires , and axle are properly matched.
P A GE 30 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) MAINTENANCE (MIXER) 3. After first road use, retorque all lug nuts in sequence.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 31 MAINTENANCE (MIXER)/STORAGE W ARNING — Keep Hands Clear of Drum When rotating the mixing drum from the dump position to the upright position, keep hands clear of safety grate.
P A GE 32 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the ev.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 33 ) D E U N I T N O C ( G N I T O O H S E L B U O R T E N I G N E .
P A GE 34 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) G N I T O O H S E L B U O R T R E X I M . 0 1 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S . e t a t o r t o n l l i w s e d a l B , y v a e h o o t d a o l l a i r e t a M ? y t i l i b a p a c r e x i m g n i d e e c x e .
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 35 HYDRAULIC SYSTEM DIAGRAM Figure 39. Hydraulic System Diagram.
P A GE 36 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) EXPLANA TION OF CODE IN REMARKS COLUMN The contents and part numbers listed in the parts section are subject to change without notice . Multiquip does not guarantee the availibility of the parts listed.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 37 SUGGESTED SP ARE P ARTS MS120 1 T O 3 UNITS Qt y . P/ N Description 6 ............ 491010 ............ R UBBER LA TCH ASSY . 1 ............ EM200293A .... P ADDLE ARM T OW SIDE 1 .
P A GE 38 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) NAMEPLA TE AND DECALS.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 39 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 DCL151 DECAL, T OWING INSTR UCTIONS 2 2 EM948630 DECAL, PUSH T O ST.
P A GE 40 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) P ADDLE BLADES ASSY . TO W END CENTER ENGINE END ENGINE END CENTER T OW END 8 10 18 10 13 12 11 14 2 15 1.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 41 NO . P AR T NO . P AR T NAME QTY . REMARKS 2 492584 N U T , LOCK 1/2" 8 3 EM200295A P A DDLE ARM, CENTER T .
P A GE 42 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) STEEL DRUM ASSY . (MANUAL).
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 43 NO P AR T NO P AR T NAME QTY . REMARKS 1 # EM203449 GR A TE, MO V ABLE 1 2# 7170 5/32" 3-5/16" 2 3# 61.
P A GE 44 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) STEEL DRUM ASSY . (HYDRAULIC) 5 9 8 7 11 14 8 7 10 22 18 19 21 20 15 24 17 23 25 12 REAR FRONT 23 26 HYDRAULIC DUMP 7 8 6 9 16 4 1 25 2 2 3 3 25 6 24 3 25 27 P ART OF FRAME NOTES: 1 COMPLETE DRUM ASSEMBL Y , ITEM 27 INCLUDES ITEMS WITHIN DASHED LINE.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 45 NO P AR T NO P AR T NAME QTY . REMARKS 1 # EM203449 MO VEABLE GRA TE 1 2# 7170 PIN, HITCH CLIP 5/32" 3-5/16.
P A GE 46 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) P ADDLE SHAFT ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 47 P ADDLE SHAFT ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 3061 S P A CER, THIN SEAL 1 4 2# 3494 OUTER SEAL, .
P A GE 48 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HYDRAULIC ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 49 NO . P AR T NO . P AR T NAME QTY . REMARKS 2 492356 B O L T 1/4" X 3/4" 2 4 2101402 W ASHER, SPRING 1/4" .......................................... 2 .
P A GE 50 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) FRAME ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 51 NO P AR T NO P AR T NAME QTY . REMARK 1 13212 GROMMET ............................................. 1 ............. WITH DUMP (HYDRA ULIC DUMP CYL.) 2 EM941280 LUG NUT 8 3 13365Y MAIN FRAME .
P A GE 52 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) STEEL ENGINE COVER ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 53 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 511580Y ENGINE CO VER-STEEL 1 2 509726Y HINGE 2 3 491010 R UBBER LA TCH ASSY .
P A GE 54 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA ENGINE ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 55 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 3364 ENGINE, HOND A 11HP GX390U1QA2 1 2 203148 T U B E , E X H AUS .
P A GE 56 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — AIR CLEANER ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 57 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16271ZE2000 GASKET , ELBOW 1 2 17210ZE3010 ELEMENT , AIR CLEANER .
P A GE 58 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — CAMSHAFT ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 59 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 14 10 0Z F6 W0 CAMSHAFT ASSEMBL Y ............................... 1 ................ INCLUDES ITEMS W/ * .
P A GE 60 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — PISTON ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 61 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 13010ZF6003 RING SET , PIST ON (STD . ) 1 1 13010ZF6005 RING SET , PIST ON (STD . ) 1 1 13011ZF6003 RING SET , PIST ON (OS 0.
P A GE 62 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — CRANKCASE COVER ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 63 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * 06165ZE3000 GO VERNOR KIT (OPIONAL) ........................... 1 ......... INCLUDES ITEMS W/ # 2 11300ZE3602 CO VER ASSY .
P A GE 64 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — CRANKSHAFT ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 65 NO . P AR T NO . P AR T NAME QTY . REMARKS 2 13310ZF6W10 CRANKSHAFT , Q-TYPE .................................. 1 ......... INCLUDES ITEMS W/ * 2 ◊ ◊ ◊ ◊ ◊ 13310ZF6W11 CRANKSHAFT COMP .
P A GE 66 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — CYLINDER BARREL ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 67 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 12000ZF6W12 BARREL ASSY ., CYL. ALERT OIL .......... 1 ....... INCLUDES ITEMS W/ * ...............
P A GE 68 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — CYLINDER HEAD ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 69 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 12200ZF6W01 CYLINDER HEAD ............................................ 1 ......... INCLUDES ITEMS W/ * 1 ◊ ◊ ◊ ◊ ◊ 12200ZF6406 CYLINDER HEAD .
P A GE 70 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — F AN COVER ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 71 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16731ZE2003 CLIP , TUBE 1 2 19610ZE3010ZA CO VER, F AN *R280*, RED 1 3 19631ZE3W00 SHROUD 1 4 32197ZH8003 SUB-HARNESS .
P A GE 72 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — FL YWHEEL ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 73 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 19511ZE3000 F AN, COOLING 1 2 28450ZE3W11 PULLEY , ST ARTER (SCREEN GRID) 1 4 31100ZE3701 FL YWHEEL 1 6 90201ZE3790 NU T , SPECIAL 16MM .
P A GE 74 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — IGNITION COIL ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 75 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 30500ZF6W02 COIL ASSEMBL Y , IGNITION ....................... 1 ......... REPLACES 305007E2023 1 ◊ ◊ ◊ ◊ ◊ 30500ZF6W02 COIL ASSEMBL Y , IGNITION .
P A GE 76 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — CARBURETOR ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 77 CARBURET OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 #% 16010ZE2812 GASKET SET .
P A GE 78 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — MUFFLER ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 79 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 18310ZE2W61 MUFFLER 100DB 1 2 18320ZE2W61 PRO TECT OR, MUFFLER 1 3 .
P A GE 80 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — RECOIL ST ARTER ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 81 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 28400ZE3W01ZA ST ARTER ASSY ., RECOIL *R8*, RED . ............. 1 ....... INCLUDES ITEMS W/ * 1 ◊ ◊ ◊ ◊ ◊ 28400ZE3W01ZP ST A R TER ASSY .
P A GE 82 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2— CONTROL ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 83 NO . P AR T NO . P AR T NAME QTY . REMARKS 2 16551ZE3000 ARM, GO VERNOR 1 3 16555ZE3000 ROD , G O VERNOR 1 4 16561ZE3000 SPRING, GO VERNOR 1 5 16562ZE3000 SPRING, THR O TTLE RETURN 1 6 16570ZE3W20 CONTROL ASSEMBL Y , REMO TE .
P A GE 84 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2/GX390U1QA2 — FUEL T ANK ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 85 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16854ZH8000 R UBBER, SUPPOR TER (107MM) 1 3 16955ZE1000 JOINT , FUE.
P A GE 86 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) HONDA GX390K1QA2 — GASKET KIT ASSY ..
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 87 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * 11381ZE3800 GASKET , CASE CO VER 1 3 * 12251ZF6W00 GASKET , CYLIN.
P A GE 88 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) GX-390K1QA2 GX-390U1QA2 HONDA GX390K1QA2/GX390U1QA2 — LABELS ASSY .
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 89 NO . P AR T NO . P AR T NAME QTY . REMARKS 1 ◊ ◊ ◊ ◊ ◊ 87516ZH7000 MARK, OPERA T OR 1 3 ◊ ◊ ◊ ◊ ◊ 87532ZH7000 MARK,, THRO TTLE INDICA TION 1 4 87521ZF6W01 EMBLEM .
P A GE 90 — MS120 HYDRA ULIC MIXER • OPERA TION AND P ARTS MANU AL — REV . #0 (07/10/08) P A YMENT TERMS T erms of payment f or par ts are net 30 da ys. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice.
MS120 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #0 (07/10/08) — PAGE 91 NOTES.
OPERA TION AND P AR TS MANUAL Y our Local Dealer is: © COPYRIGHT 2008, MUL TIQUIP INC. Multiquip Inc, and the STOW logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.
An important point after buying a device Stow MS120H13 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stow MS120H13 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stow MS120H13 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stow MS120H13 you will learn all the available features of the product, as well as information on its operation. The information that you get Stow MS120H13 will certainly help you make a decision on the purchase.
If you already are a holder of Stow MS120H13, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stow MS120H13.
However, one of the most important roles played by the user manual is to help in solving problems with Stow MS120H13. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stow MS120H13 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
