Instruction/ maintenance manual of the product G-2.9R Stow
Go to page of 72
OPERA TION AND P AR TS MANUAL MODEL G-2.9R POR T ABLE AC GENERA TOR (GASOLINE ENGINE) S/N 5497956 AND BELOW S/N 5497957 AND ABOVE Re vision #1 (10/28/04) THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES.
P A GE 2 — ST O W G-2.9R A.C. GENERA T OR— OPERA TION & P AR TS MANU AL — REV . #1 (10/28/04).
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING ST O W MAIN OFFICE P ost Office Bo x 6254 888-252-ST O W Carson, Ca 90749 FAX: 310-537-1986 Email: stow@multiquip.
P A GE 4 — ST O W G-2.9R A.C. GENERA T OR— OPERA TION & P AR TS MANU AL — REV . #1 (10/28/04) T ABLE OF CONTENTS Specification and part number are subject to change without notice . ROBIN EX170D20210 Engine (EP A) Crankcase Assembly ........
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 5 P ARTS ORDERING PR OCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ .
P A GE 6 — ST O W G-2.9R A.C. GENERA T OR— OPERA TION & P AR TS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — DIMENSIONS Figure 1. Dimensions.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 7 ST O W G-2.9R — SPECIFICA TIONS Effects of Altitude and Heat The maximum output of the engine listed above is applicable to supplying electrical power for continuous service at ambient conditions in accordance with SAE T est cord J607.
P A GE 8 — ST O W G-2.9R A.C. GENERA T OR— OPERA TION & P AR TS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — SAFETY MESSA GE ALER T SYMBOLS Safety precautions should be followed at all times when operating this equipment.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 9 ST O W G-2.9R — SAFETY MESSA GE ALER T SYMBOLS AL W A YS wear approv ed ey e and hearing protection. NEVER operate equipment with covers, or guards remov ed.
P A GE 10 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) The following safety guidelines should always be used when operating the ST O W G-2.9R P or table Generator: GENERAL SAFETY ■ DO NO T operate or ser vice this equipment before reading this entire manual.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 11 ST O W G-2.9R — RULES FOR SAFE OPERA TION ■ AL W A YS be sure the operator is f amiliar with proper safety precautions and oper ation techniques before using gener ator .
P A GE 12 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) Backfeed to a utility system can cause electrocution and or property damage. NEVER connect the generator to a building's electrical system without a transfer switch or other approved device.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 13 NO TE P A GE.
P A GE 14 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) OPERA TION AND SAFETY DECALS (S/N 5497956 AND BELO W) Machine Safety Decals The ST O W G-2.9R por table generator is equipped with a n umber of safety decals (Figures 2A and 2B).
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 15 OPERA TION AND SAFETY DECALS (S/N 5497957 AND ABO VE) Figure 2B.
P A GE 16 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — GENERAL INFORMA TION ST O W G-2.9R Familarization General Inspection Prior to Operation This generator has been thoroughly inspected and accepted prior to shipment from the f actor y .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 17 Single Phase Load Always be sure to check the nameplate on the generator and equipment to insure the wattage, amperage and frequency requirements are satisfactorily supplied by the generator for operating the equipment.
P A GE 18 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — CONTR OLS AND INDICA T ORS Figure 3.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 19 ST O W G-2.9R — CONTR OLS AND INDICA T ORS This ROBIN engine is equipped with a low oil shutdown capability . A built in sensor will automatically turn off the engine should the oil level fall below a safe operating condition.
P A GE 20 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — GENERA T OR REFUELING Figure 4. Generator Refueling Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 21 ST O W G-2.9R — INST ALLA TION Outdoor Installation Install the generator in a area that is free of debris , bystanders , and overhead obstructions . Make sure the generator is on secure level ground so that it cannot slide or shift around.
P A GE 22 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) Connecting the Ground The nut and ground terminal on the generator should alwa ys be used to connect the gener ator to a suitable ground. The ground cable should be #8 size wire minimum.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 23 ) n o i t a r e p O e s a h P e l g n i S , z H 0 6 ( n o i t c e l e S e l b a C .
P A GE 24 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — PRE-INSPECTION (ENGINE) Figure 7. Engine Oil Dipstick (Removal) 3 . Insert and remove the dipstick without screwing it into the filler neck.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 25 ST O W G-2.9R — INITIAL ST ART -UP (ENGINE) This section is intended to assist the operator with the initial star t-up of the trash gener ator .
P A GE 26 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) 6 . If the engine has started, slowly return the choke lever (Figure 12 ) to the “OPEN” position. If the engine has not started repeat steps 1 through 5.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 27 ST O W G-2.9R — PREP ARA TION FOR LONG -TERM ST ORA GE Generator Storage For storage of the generating set for over 30 days, the following is required: ■ Drain the fuel tank completely , or add ST A-BIL to the fuel.
P A GE 28 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) Use T able 5 as a gener al maintenance guideline when ser vicing your engine. For more detail engine maintenance information, refer to the engine owner's manual supplied with your engine.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 29 ST O W G-2.9R — MAINTENANCE (ENGINE) Maintenance P erf or m the scheduled maintenance procedures as defined by T able 6 and below : D AIL Y ■ Thoroughly remove dirt and oil from the engine and control area.
P A GE 30 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — WIRING DIA GRAM (S/N 5497956 AND BELO W) Figure 25.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 31 ST O W G-2.9R — WIRING DIA GRAM (S/N 5497957 AND ABO VE) Figure 26.
P A GE 32 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — TR OUBLESHOO TING (ENGINE) Practically all breakdowns can be prevented by prope.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 33 ST O W G-2.9R — TR OUBLESHOO TING (ENGINE) ) D E U N I T N O C ( G N I T O O H S E L B U O R T E N I G N E .
P A GE 34 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — TR OUBLESHOO TING (GENERA T OR) Practically all generator breakdowns can be pre.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 35 NO TE P A GE.
P A GE 36 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusiv e) where a par ticular par t is used.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 37 ST O W G-2.9R — SUGGESTED SP ARE P AR TS P ar t numbers on this Suggested Spare P ar ts List may supercede/ replace the P/N shown in the text pages of this book.
P A GE 38 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — NAME PLA TE AND DECALS (S/N 5497956 AND BELO W) NAMEPLA TE AND DECALS (S/N 5497.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 39 NAMEPLA TE AND DECALS (S/N 5497956 AND BELO W) NO . P AR T NO . P AR T NAME QTY . REMARKS 1 A2512200802 DECAL; CONTROL P ANEL ..............................
P A GE 40 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — NAME PLA TE AND DECALS (S/N 5497957 AND ABO VE) NAMEPLA TE AND DECALS .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 41 NAMEPLA TE DECALS . (S/N 5497957 AND ABO VE) NO . P AR T NO . P AR T NAME QTY . REMARKS 1 A2511201602 DECAL; CONTROL P ANEL ................................
P A GE 42 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — GENERA T OR ASSY . GENERA T OR ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 43 ST O W G-2.9R — GENERA T OR ASSY . GENERA T OR ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 7931000203 ROTOR ASSY . ............................... 1 .
P A GE 44 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — CONTROL BO X ASSY . (S/N 5497956 AND BELO W) CONTROL BO X ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 45 ST O W G-2.9R — CONTROL BO X ASSY . (S/N 5497956 AND BELO W) CONTROL BO X ASSY . (S/N 5497956 AND BELO W) NO P AR T NO P AR T NAME QTY . REMARKS 1 7931800203 CONTR OL BO X 1 2 0801354504 GROMMET 1 3 0601823204 RECTIFIER .
P A GE 46 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — CONTROL BO X ASSY . (S/N 5497957 AND ABO VE) CONTROL BO X ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 47 CONTROL BO X ASSY . (S/N 5497956 AND BELO W) NO P AR T NO P AR T NAME QTY . REMARKS 1 A0101000103 CONTROL BO X 1 2 0801354504 GROMMET 1 3 0601823204 RECTIFIER .
P A GE 48 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — PIPE FRAME ASSY . (S/N 5497956 AND BELO W) PIPE FRAME ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 49 ST O W G-2.9R — PIPE FRAME ASSY . (S/N 5497956 AND BELO W) PIPE FRAME ASSY . (S/N 5497956 AND BELOW) NO P AR T NO P AR T NAME QTY . REMARKS 1 A2418000703 PIPE FRAME 1 2 7935419204 R UBBER SUSPENSION 2 4 0207008000 HEX.
P A GE 50 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ST O W G-2.9R — PIPE FRAME ASSY . (S/N 5497956 AND ABO VE) PIPE FRAME ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 51 ST O W G-2.9R — PIPE FRAME ASSY . (S/N 5497956 AND ABO VE) PIPE FRAME ASSY . (S/N 5497956 AND ABOVE) NO P AR T NO P AR T NAME QTY . REMARKS 1 A2417000302 PIPE FRAME 1 2 7935419204 R UBBER SUSPENSION 2 3 7935416004 R UBBER SUSPENSION 2 4 0207008000 HEX.
P A GE 52 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ROBIN EX170D20210 — CRANKCASE ASSY . CRANKCASE ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 53 R OBIN EX170D20210— CRANKCASE ASSY . CRANKCASE ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2771010241 CRANKCASE CP ....................... 1 .......
P A GE 54 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ROBIN EX170D20210 — CRANKSHAFT AND PIST ON ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 55 ROBIN EX170D20210 — CRANKSHAFT AND PIST ON ASSY . CRANKSHAFT ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2772020121 CRANKSHAFT CP 1 5 0 0180140020 FLANGE NUT 1 7 0 0323030010 W OODR UFF KEY 1 310 2772250110 CONNECTING R OD ASSY .
P A GE 56 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) R OBIN EX170D20210 — GO VERNOR ASSY . GO VERNOR ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 57 R OBIN EX170D20210 — GO VERNOR ASSY . GO VERNOR ASSY .
P A GE 58 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ROBIN EX170D20210 — INT AKE AND EXHA UST ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 59 R OBIN EX170D20210 — INT AKE AND EXHA UST ASSY . INT AKE AND EXHA UST ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2773160111 CAM SHAFT CP ..........
P A GE 60 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ROBIN EX170D20210 — AIR CLEANER ASSY . AIR CLEANER ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 61 ROBIN EX170D20210 — AIR CLEANER ASSY . AIR CLEANER ASSY .
P A GE 62 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) R OBIN EX170D20210 — COOLING ST ARTING ASSY . COOLING ST ARTING ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 63 R OBIN EX170D20210 — COOLING ST ARTING ASSY . COOLING ST AR TING ASSY .
P A GE 64 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ROBIN EX170D20210 —CARB URET OR ASSY . CARBURET OR ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 65 R OBIN EX170D20210 — CARBURET OR ASSY . CARBURET OR ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 210 2776230420 CARBURET OR ASSY . ......................
P A GE 66 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ROBIN EX170D20210 — FL YWHEEL ASSY . FL YWHEEL ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 67 R OBIN EX170D20210 — FL YWHEEL ASSY . FL YWHEEL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 0 2777923011 FL YWHEEL CP 1 1 1 2777943101 IGNITION COIL CP 1 3 0 0011406250 B O L T & W ASHER 2 5 0 27773101H1 WIRE 1 CP 1 6 0 X660000361 SWITCH ASSY .
P A GE 68 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) ROBIN EX170D20210 — ELECTRIC DEVICE ASSY . ELECTRIC DEVICE ASSY .
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 69 R OBIN EX170D20210 — ELECTRIC DEVICE ASSY . ELECTRIC DEVICE ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 700 2777630111 OIL SENSOR CP 1 70 5 KU31104311 F L OA T , C/U CP3 1 740 0011406160 B O L T & W ASHER ASSY .
P A GE 70 — STO W G-2.9R A.C. GENERA T OR— OPERA TION & P ARTS MANU AL — REV . #1 (10/28/04) Effective: July 15, 2003 TERMS AND CONDITIONS OF SALE — P ARTS T erms and Conditions of Sale ST.
STOW G-2.9R A.C. GENERATOR — OPERATION & PARTS MANUAL — REV. #1 (10/28/04) — PAGE 71 NO TE P A GE.
OPERA TION AND P AR TS MANUAL STOW CONSTRUCTION EQUIPMENT A DIVISION OF MUL TIQUIP INC . POST OFFICE BO X 6254 CARSON, CA 90749 888-252-ST OW [888-252-7869] F AX: 310-537-1986 E-mail: stow@ multiquip.
An important point after buying a device Stow G-2.9R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stow G-2.9R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stow G-2.9R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stow G-2.9R you will learn all the available features of the product, as well as information on its operation. The information that you get Stow G-2.9R will certainly help you make a decision on the purchase.
If you already are a holder of Stow G-2.9R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stow G-2.9R.
However, one of the most important roles played by the user manual is to help in solving problems with Stow G-2.9R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stow G-2.9R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
