Instruction/ maintenance manual of the product SEH600iTCX Stoves
Go to page of 28
Stoves SEH600iTCX P art No 082753602 Date 19/03/2013 Users Guide & Installation Handbook.
3.010 CONTENTS & INTRODUCTION CONTENTS • SAFET Y • USING THE PRODUCT • CLEANING • INST ALL A TION INSTRUCTIONS • TECHNICAL DA T A • CUSTOMER CARE INTRODUCTION Thank you for buying this British- built appliance from us.
Safety 5.160 BEFORE USING THE PRODUCT Make sure that you ha ve removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. GENERAL WARNING! - The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements.
Safety 5.160 during use, as this will seriously affect the safet y and performance, particularly in relation to surface temper atures becoming hot and gas oper ated parts not workingefciently .The coolingfan(ift ted)is designed to run on after the control knob has been switched off .
Safety 5.160 NEVER try to extinguish arewithwater ,but switch off the appliance andthencoverame e.g. with a lid or a damp cloth.
Safety 5.160 only . It must not be used for other purposes, f or example room heating. Induction Hob P arts of the appliance may become hot while in use.
Safety 5.160 K eep electrical leads from tr ailing over or going near the hob. The appliance must never be disconnected from the mains supply during use as this will seriously affect the safet y and performance, particularly in relation to surface temper atures becoming hot and component parts not workingefciently .
Safety 5.160 Old Appliances The Symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appli- cable collection point for the recycling of electrical and electronic equipment.
USING THE HOB - INDUCTION Touch Controls Feature S ymbol Description Eco Power Inductionpoweristhemostefcientmeans of cooking food on a hob, pr oviding fast heat up and boiling.
USING THE HOB Touch Controls The touch controls for your induction ha ve beendesignedtoprovideyouwithnger tip control of your hob , providing accurate and repeatable power settings for cooking and an easy clean surface that can be easily wiped over .
USING THE HOB SPECIAL HOB FUNCTIONS Central On/Off switch The central on/off switch enables all of the cooking zones to be switched off simultaneously at a touch of a button, so whenyouhavenishedcookingorar e called away fr om the kitchen for any rea- son you can rest assured that everything is under control and safe.
USING THE HOB Auto Heat Up Helps to take the worry out of pans boiling over and burning f ood! No need to stand over the pan, allows you to do other tasks whilst maintaining control over the pan.
USING THE HOB Power Boost Rev up your hob with this f eature, tempo- rarily boost the power to a cook zone by a massive 60% The power boost is a function that can be used to temporally boost the normal maximum power for a cook zone by bor - rowing the av ailable power from a “paired zone” .
USING THE HOB Timer auto switch off The timer can be set to automatically turn off a cooking zone. All four cook zones can be simultaneously timed to turn off automatically . Cook zones can be set for a maximum time of 99 minutes. Warning! Never leave the hob unat tended when in use, even when you hav e set the timer to turn off the cook zone.
USING THE HOB Griddle Zone with Bridge Function Flexibility is what counts. The LH zones can be used as two sepa- rate round cooking z ones which can be controlled individually or they can be bridged to provide a large ov al zone that can be controlled via one setting.
USING THE HOB Pans and cookware for induction hobs. Pans and Cookw are for induction cooking zones must be made of ferrous mate- rial such as cast iron and have magnetic properties. The base must also be of the correct diameter . It’simportantthatgoodqualit yatbot - tomed pans are used.
USING THE HOB Child Lock “L” This feature is to help prev ent accidental switching on of the hob, especially by young children. To Activate: 1)SelecttheOn/OffK ey . 2)SimultaneouslytouchtheRHFcook zone and the P ower Boost keys, the hob should beep.
USING THE HOB TROUBLESHOOTING The hob produces a smell the rst few times it is used. Heat a pan full of water on each zone f or half an hour . Pans make a noise during cooking This is caused by vibration due to the pas- sage of energy from the hob to the pan.
CLEANING ELECTRIC HOB Ceramic glass hobs • The ceramic hob top can be cleaned using a clean, damp cloth or kitchen paper . Do not use a used dishcloth orspongeastheycanleavealmof detergent on the surface which can lead to discoloration.
installation Installing the hob over a unit with a drawer or door Air outlet is underneath work surface. If necessary , remove the front crosspiece of the unit. Suitable protection to prevent obstruction of the air inlet to the fans must be provided. W e recommend that you install this appli- ance in a work top which is a minimum 38mm deep.
installation Installation above an oven Refer to the manuf acturer’s instructions for clearances abo ve the oven. W e recommend a 9mm gap between the bottom of the hob and appliance, should the work surface be less than 38mm deep.
installation Clearances and dimensions – re- quirements 1. No shelf or overhang of combustible material should be closer than 650mm above the hob. 2. There must be a minimum clearance of 50mm between the edges of the hob and any side walls; this clear ance must be maintained up to 420mm above the worktop.
installation Fitting into worktop Cut a hole in the work surface to the required size. See table for relev ant dimensions. A clearance of at least 50mm should be maintained between the cutout and any rear or side wall. The worktop must be of heat-resistant material or covered with heat -resistant material.
installation Fixing Brackets Installation advice - cabinetry Dealing with sides, cross-rails and back-panels in cabinetry Depending on the cabinets, the worktop thickness and the hob positioning, it is possible for the hob base and/or the clamp brackets to interf ere with parts of the cabinet.
installation Connect to the electricity supply (For Fixed Wiring only) Warning: This appliance must be earthed. The hob must be installed by a competent electrician, using a suitable double pole control unit, with 3mm minimum contact separation at all poles.
technical data MAX Total Power Rating @ 220 - 240V ~ 50Hz = 7.4kW Individual Cook Zone Power Ratings Cook Zone Normal Power Rating / Power Boost kW LHF 1.
CUSTOMER CARE 15.030 CUSTOMER CARE WEB SHOP Having purchased a superior cooker , hob or hood from us, you’ll naturally want to keep it looking great.
CUSTOMER CARE CUSTOMER CARE T o contact Stoves about y our appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3740 incaseofdifcultywithintheUK Alternatively general, spar es and service information is available fr om our website at www.
An important point after buying a device Stoves SEH600iTCX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stoves SEH600iTCX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stoves SEH600iTCX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stoves SEH600iTCX you will learn all the available features of the product, as well as information on its operation. The information that you get Stoves SEH600iTCX will certainly help you make a decision on the purchase.
If you already are a holder of Stoves SEH600iTCX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stoves SEH600iTCX.
However, one of the most important roles played by the user manual is to help in solving problems with Stoves SEH600iTCX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stoves SEH600iTCX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
