Instruction/ maintenance manual of the product sheraton free standing stove Stovax
Go to page of 28
Sheraton Free Standing Stove M ODELS: 7016/7017/7027 PM216 - Issue 1 (Sept 2007) Instructions for Use, Installation and Servicing For use in Great Britain and Republic of Ireland.
COVERING THE FOLLOWING MODELS: 7016/7017/7027 PAGE APPLIANCE COMMISSIONING CHECKLIST 3 OPERATING INSTRUCTIONS 4 INSTALLATION INSTRUCTIONS 9 Technical Specifications 9 Site Requirements 10 Pre-Installa.
3 APPLIANCE COMMISSIONING CHECKLIST To assist us in any guarantee claim please complete the following information:- Dealer appliance was purchased from Name: .............................................................................................
4 OPERATING INSTRUCTIONS Before using this appliance, please read these instructions carefully. 1. GENERAL 1.1 This stove is designed for domestic heating and should only be used for this purpose, and in accordance with the manufacturers operating instructions.
5 OPERATING INSTRUCTIONS DOOR HANDLE 1.12 To Open and Close: Use a protective gloved hand to operate. 1.13 Rotate RH Knob anti-clockwise to open. Rotate clockwise to close. 1.14 Warning: Do not force the handle to turn more than 1/4 turn as damage may occur.
6 OPERATING INSTRUCTIONS 4.9 The ideal control settings to suit the particular installation and personal preferences will be established by experience in using the stove. 4.10 Do not load fuel higher than the log guard. It is not recommended to load large amounts of logs and burn with the Airwash control on low settings for long periods of time.
7 OPERATING INSTRUCTIONS 9.2 Fuel Quality (Solid Fuel) Use only recommended solid fuels, which are approved for use with closed appliances. Symptoms of poor performance related to unsuitable fuels inc.
8 OPERATING INSTRUCTIONS Windy days - Smoking from the appliance. This could be caused by turbulent airflow around chimney terminal, possibly caused by the position of other buildings or obstacles nearby. This problem is, also, sometimes associated with oversize chimneys, which may even have downdraught problems on calm days.
9 TECHNICAL SPECIFICATION SHERATON STOVE Nominal Heat Output Wood Seasoned wood (less than 20% moisture content) Briquette smokeless fuel suitable for closed appliances.
10 SITE REQUIREMENTS Before installation of this product please read these instructions fully. It is very important to also understand the requirements of the UK Building Regulations (England and Wales – Document J / Scotland - Part F, Eire - Document J), along with any local regulations and working practices that may apply.
11 HEARTH DIMENSIONS The appliance must stand on a constructional hearth with the minimum dimensions as shown in the diagram below. Check that the building has a suitable loadbearing capacity for the hearth and stove. If in doubt consult a structural engineer for advice before proceeding.
12 SITE REQUIREMENTS WALLS NEXT TO A HEARTH Solid, non-combustible material e.g. masonary or concrete Thickness W C 150mm minimum 150mm minimum C H Location of Stove Dimensions of non-combustible mate.
13 PRE-INSTALLATION CHECKS It is important that adequate ventilation exists and the flue or chimney system that is to be used is in good working condition.
14 PRE-INSTALLATION CHECKS Without liner system round (diameter) mm mm inch mm inch inch m feet Without liner system (square) minimum dimension With liner or factory made system (diameter) installed i.
15 1.4 Lift the stove into position on the prepared hearth area, taking care not to damage the hearth finish. Level stove using foot adjusting bolts. 1.5 Connect the stove to the chimney system, using Stovax enamelled flue pipe and seal the connecting joints.
16 INSTALLATION INSTRUCTIONS 1.9 Connect a straight piece of flue pipe by inserting it into the flue spigot and seal using fire cement and secure with a suitable self tapping screw. PR7220S 600mm min 1000mm max unsupported Elbow with access cover Size Stovax Part No.
17 1.1 Replace the firebricks, baffle, and log retainer. 1.2 Check the door alignment and catch operation, adjust if required. 1.3 Inspect the door seals for damage and check the operation of the air controls. 1.4 Carry out a final smoke draw test, by first warming the flue with a blowlamp, or similar, for about 10 minutes.
18 MAINTENANCE and SERVICING See chart on page 19 for common spare parts refered to in this section. For a complete list of spare parts and accessories contact your Stovax dealer for the Stovax Fireplace, Stove & Hearth Accessories brochure or call 01392 474011 1.
19 This is a list of the maintenance products you may need to use Task Product name Stovax Code Number Glass cleaning Stove glass cleaner 500ml (wipe on) 4111 Stove glass cleaner (spray on) 4103 Preve.
20 MAINTENANCE and SERVICING Fixing Screw (x10) Fixing Clip (x4) Glass (x2) Glass Seal (3mm) Door (x2) 8.3 Using a screwdriver remove the glass clip fixing screws. The old glass can then be lifted clear of the door. (Note how the 3mm sealing rope is placed between the glass and the door.
21 BASIC SPARE PARTS LIST.
22 BASIC SPARE PARTS LIST Part No. Descritpion Casting No. SH1 Blanking Plate 54792/175 SH2 Flue Adapter 54792/180 SH4 Side Plate 54792/120 SH6 Front Plate 54792/060 SH7 Leg 54792/010 SH8 Lip Plate 54.
23 Product Description Code 3047 Extra long matches 4293 Fire lighters 5039 Gas lighter 4052 Log basket 3048 Wood sling - for easy carrying of logs 3016 Log tongs 4027 Extra long protective gloves 304.
24.
25.
SERVICE RECORDS 26 1ST SERVICE Date of Service:........................................................................... Next Service Due:....................................................................... Signed:................................
27.
Stovax Ltd, Falcon Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7LF Tel: (01392) 474011 Fax: (01392) 219932 E-mail: info@stovax.com www.stovax.
An important point after buying a device Stovax sheraton free standing stove (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stovax sheraton free standing stove yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stovax sheraton free standing stove - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stovax sheraton free standing stove you will learn all the available features of the product, as well as information on its operation. The information that you get Stovax sheraton free standing stove will certainly help you make a decision on the purchase.
If you already are a holder of Stovax sheraton free standing stove, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stovax sheraton free standing stove.
However, one of the most important roles played by the user manual is to help in solving problems with Stovax sheraton free standing stove. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stovax sheraton free standing stove along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
