Instruction/ maintenance manual of the product 7119 Stovax
Go to page of 32
PM227 ENG Issue 2 (July 2008) Stockton 3/4/5/6/7/8/11 Free Standing Stove M ODELS: 7118/7101/7102/7119/7160/7127/7130/7161/7100/7162/7117/7120/7163/7103/7104/ 7105/7113/7113LC/7128/7114/7106/7106LC/7106HC/7116/7116LC/7116HC Instructions for Use, Installation and Servicing For use in GB & IE (Great Britain and Republic of Ireland).
COVERING THE FOLLOWING MODELS: 7118/7101/7102/7119/7160/7127/7130/7161/7100/7162/7117/7120/7163/7103/7104/ 7105/7113/7113LC/7128/7114/7106/7106LC/7106HC/7116/7116LC/7116HC 2 APPLIANCE COMMISSIONING CH.
3 APPLIANCE COMMISSIONING CHECKLIST To assist us in any guarantee claim please complete the following information:- Dealer appliance was purchased from Name: .............................................................................................
4 USER INSTRUCTIONS 1. GENERAL POINTS 1.1 Before use of this appliance please read these instructions fully. 1.2 All local regulations, including those referring to national and European Standards need to be complied with when installing the appliance.
5 USER INSTRUCTIONS AIR CONTROLS Airwash Control OP E N CL O S E Primary Control OP E N CL O S E 1 DOOR PR7213 PR7212 2 DOOR DOOR HANDLE 1.14 Use a protected gloved hand to operate. DO NOT OPEN THE DOOR WITH BARE HANDS To Open and Close Drop tool over knob to fit.
6 USER INSTRUCTIONS Poor quality timber: — Causes low combustion efficiency — Produces harmful condensation — Reduces effectiveness of the airwash and life of the appliance Do not burn construction timber, painted, impregnated / treated wood, manufactured board products or pallet wood .
7 USER INSTRUCTIONS 5.2 Burning Solid fuel : To burn solid fuel efficiently in a wood version the multi- fuel kit should be fitted. Multi-fuel kit part numbers: Appliance Part No.
8 USER INSTRUCTIONS 5.5 When in use, burning the appliance at high output for a short period also reduces tars and creosote. 5.6 You must burn only anthracite or smokeless fuels suitable for use in closed appliances . 5.7 Do not burn bituminous coal, ‘petro-coke’ or other petroleum based fuels as this invalidates the product guarantee .
9 Do not re-light the appliance until the problem is solved. 7. ASH REMOVAL 7.1 All Fuels when Multi-fuel kit is fitted: •Riddle, See Diagram 11 PR7208 Push/Pull to operate •Open Doors, See Diagram 12 PR7211 Open •Remove Ashpan carefully Heat can remain long after use.
10 13.3 Ensure adequate access to cleaning doors where it is not possible to sweep through the chimney. 13.4 If the appliance is believe to have previously served an open fire the chimney must be swept a second time within a month of regular use after installation.
11 •Glass blackening •Thick, brown and sticky tar oozes from the pipe joints This is caused by burning damp wood and burning your appliance at too low a.
12 TECHNICAL SPECIFICATION STOCKTON Model Stockton 3 - 7118 Stockton 4 - 7101/7102 Stockton 5 - 7119/7160/7108/7127/Stockton 5ML - 7130 Stockton 6 - 7100/7162/Stockton 6HL - 7117 Stockton 7 - 7120/716.
13 TECHNICAL SPECIFICATION 1. STANDARD FEATURES • Primaryair (under grate air for full multi-fuel use) • Airwash(for wood burning / clean glass) •.
14 TECHNICAL SPECIFICATION STOCKTON DIMENSIONS Description Model A B C D E F G H (dia) Stockton 3 7118 510 389 291 90 405 338 96 125 Stockton 4 7101 572 389 291 90 465 338 112 125 7102 Stockton 5 7119.
15 1. FLUE OR CHIMNEY 1.1 The flue or chimney system must be in good condition. It must be inspected by a competent person and passed for use with the appliance before installation Products of combustion entering the room can cause serious health risks.
16 2.1 Except Stockton 5 Midline and Stockton 6 Highline the appliance must stand on a constructional hearth which is at least 125mm thick with the minimum dimensions as shown. SITE REQUIREMENTS 150mm minimum Constructional Hearth 840mm minimum Constructional Hearth 840mm minimum 150mm minimum 150mm minimum 225mm minimum PR7205 1.
17 SITE REQUIREMENTS WALLS NEXT TO A HEARTH Solid, non-combustible material e.g. masonry or concrete Thickness W C 150mm minimum 150mm minimum C H PR7204 Position of Appliance & Hearth in relation.
18 PRE-INSTALLATION CHECKS * When measured from the top of the flue, with no horizontal sections and a maximum of 4 bends with angles of less than 45° ‡ May be 125mm (5”) if burning low volatiles (smokeless) fuels approved for use in Smoke Control Areas.
19 PRE-INSTALLATION CHECKS 3.1 This appliance requires ventilation to supply combustion air. Any room containing the appliance must have a permanent air vent opening with a total free area of at least 550mm 2 per kW of appliance rated output above 5kW.
20 LEGAL REQUIREMENTS Before installation of this product please read these instructions fully. It is very important to understand the requirements of the national Building Regulations* and standards**, along with any local regulations and working practices that may apply.
21 INSTALLATION INSTRUCTIONS PR7218 Seal Collar with Fire Cement Self Tapping Screw Tee Size Stovax Part No. 5" 4516* 6" 4616 Cap PR7195 600mm min 1000mm max unsupported Elbow with access cover Size Stovax Part No. 5" 4512 6" 4612 7" 4712 Flue Pipe 915mm (3ft) Size Stovax Part No.
22 INSTALLATION INSTRUCTIONS PR7211a •Replace in reverse order 4. FITTING AND REMOVAL OF THE BAFFLES 4.1 The appliance is fitted with a baffle in the top of the firebox to maintain efficient combustion 4.2 Allow the stove to cool fully before removing the baffle system.
23 INSTALLATION INSTRUCTIONS •Place the main grate into place on the steel runners The grate must sit flat and locate in the fixing slots in the supports.
24 COMMISSIONING 1.1 To commission: • Replace the firebricks, baffle, and log retainer • Check the door alignment and catch operation, adjust if required, see Installation Section 6. Adjusting Door hinges • Check the soundness of door seals, castings and joints •C heck the operation of the air controls 1.
25 MAINTENANCE and SERVICING For a complete list of spare parts and accessories contact your Stovax or call 01392 474011 1. ANNUAL SERVICE 1.1 At the end of the heating season strip, inspect and clean.
26 1.4 Using the appliance for the first time: • Burn at a low output for the first day of use This allows the seals, fixing glues and paint to fully cure. 1.5 During this time the appliance may give off some unpleasant odours: •Keep the room well ventilated to avoid a build-up of fumes 1.
27 •Refit the door •Close to apply pressure on the new rope •Leave the appliance closed for at least 12 hours before lighting the stove •Use at a low output for approximately one day 7.
28 BASIC SPARE PARTS LIST 1 2 6 8 7 9 10 12 11 3 4 5 Number and type of fire bricks vary between models Stockton 6 Highline Multi-fuel Warming Shelf Diagram No.
SERVICE RECORDS 29 1ST SERVICE Date of Service:........................................................................... Next Service Due:....................................................................... Signed:................................
30.
31.
Stovax Ltd, Falcon Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7LF Tel: (01392) 474011 Fax: (01392) 219932 E-mail: info@stovax.com www.stovax.
An important point after buying a device Stovax 7119 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stovax 7119 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stovax 7119 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stovax 7119 you will learn all the available features of the product, as well as information on its operation. The information that you get Stovax 7119 will certainly help you make a decision on the purchase.
If you already are a holder of Stovax 7119, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stovax 7119.
However, one of the most important roles played by the user manual is to help in solving problems with Stovax 7119. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stovax 7119 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
