Instruction/ maintenance manual of the product DATA 708 Barco
Go to page of 34
R9002129 INST ALLA TION MANUAL DA T A 708.
.
BARCO PROJECTION SYSTEMS Date : 260597 Art. No. : R5975987A R9002129 INST ALLA TION MANUAL DA T A 708.
Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, May 1997. All rights reserved. Trademarks are the rights of their respective owners.
Table of Contents i-1 5975987A BARCODATA 708 260597 T ABLE OF CONTENTS i WARNINGS .........................................................................................................................................................................
Table of Contents i-2 5975987A BARCODATA 708 260597.
Safety Instructions 1-1 5975987A BARCODATA 708 260597 WARNING TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT) This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to Part 15 of the FCC Rules.
Safety Instructions 1-2 5975987A BARCODATA 708 260597 Power cord with ANSI 73.11 plug : The wires of the power cord are colored in accordance with the following code. Green/yellow: ground White: neutral Black: line (live) 3 . Do not allow anything to rest on the power cord.
Unpacking and Dimensions 2-1 5975987A BARCODATA 708 260597 2 UNP ACKING AND DIMENSIONS Unpacking Take the projector out of its shipping carton and place it on a table. Save the original shipping carton and packing material, they will come in handy if you ever have to ship your projector.
Unpacking and Dimensions 2-2 5975987A BARCODATA 708 260597 Projector dimensions (mm).
Installation Guidelines 3-1 5975987A BARCODATA 708 260597 3 INST ALLA TION GUIDELINES Installation guidelines Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system.
Installation Guidelines 3-2 5975987A BARCODATA 708 260597 * Where to install the projector? To indicate a correct installation position it is necessary to know the distance : - projector - ceiling - projector - screen To find this correct position for the projector, equipped with HD145 lenses, formulas are given in the next paragraph.
Installation Set Up 1-1 5975987A BARCODATA 708 260597 4 INST ALLA TION SET UP Access to controls Opening procedure : During the projector set up and installation it is neces- sary to open the top cover. To gain access, procede as follow : *Turn both lock screws with a screwdriver or a coin counter clockwise.
Installation Set Up 4-2 5975987A BARCODATA 708 260597 Scan adaptation The scanning can be switch by turning the Horizontal and Vertical scan connectors and the convergence connectors. To change the scanning, it is necessary to open the projector top cover and to rotate the chassis.
Installation Set Up 1-3 5975987A BARCODATA 708 260597 A : Horizontal scan inversion Three connectors are used, one for each horizontal deflection coil. When changing the horizontal scan, insure that all three connectors are set in the same position. See position of the connectors for the corresponding projector configuration.
Installation Set Up 4-4 5975987A BARCODATA 708 260597.
Projector Set Up 5-1 5975987A BARCODATA 708 260597 5 PROJECT OR SET UP Projector Set Up The strap on the CPU unit allow a set up of the password mode. Gaining access to the strap - Open the top cover .
Projector Set Up 5-2 5975987A BARCODATA 708 260597.
Power Connection 6-1 5975987A BARCODATA 708 260597 6 POWER CONNECTION Power (mains) cord connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the front of the projector.
Power Connection 6-2 5975987A BARCODATA 708 260597.
Installation Adjustments 7-1 5975987A BARCODATA 708 260597 7 INST ALLA TION ADJUSTMENTS Entering the adjustment mode ADJUST MENT MODE Selec t a path f rom belo w: Select with or th en <ENTER > &.
Installation Adjustments 7-2 5975987A BARCODATA 708 260597 Overview flow chart installation mode. SCHEIMPF LUG ADJUSTM ENT <ENTER> t o conti nue <E XIT> t o return LOOS EN THE 4 LENS MOUN TING NUTS O N EA C H LE N S , UNTI L THE TAG OF EACH SCHEIMPFLUG RI NG CA N B E MOV ED T O I TS DE S IRE D POS ITI ON (1.
Installation Adjustments 7-3 5975987A BARCODATA 708 260597 ADJU STMENT MO DE Select a path from below: Select wi th or then <E NTER> <EXIT> t o return GUI DED RANDOM ACCESS INSTALLAT ION SERVICE IRIS source 1 Push the control disk up or down to highlight "Installation" and press ENTER.
Installation Adjustments 7-4 5975987A BARCODATA 708 260597 Scheimpfug adjustment The scheimpfug correction can be adjusted separately for the three tubes within 3 ranges: range 1 : 1.4 m (55") to 1.9 m (75"), optimum screen width 1.4 m (55") range 2 : 1.
Installation Adjustments 7-5 5975987A BARCODATA 708 260597 Optical lens focusing OPTICAL LE NS FO CUSI NG <ENTE R> to con tinue <EXIT> to return 1. LOOSEN THE NUT O N THE REAR O F THE XXXX L ENS, ROTATE THE LENS BARREL TO FOCUS THE CEN TER OF THE IMA GE, THE N TIGHTE N THE NUT 2.
Installation Adjustments 7-6 5975987A BARCODATA 708 260597 Raster centering The raster must be centered on the CRT screen surface of each tube, therefore, it is necessary to look into the lenses.
Installation Adjustments 7-7 5975987A BARCODATA 708 260597 CRT projection angle adjustment The projection angle of the red and blue CRT's is dependent on the desired size of the projected image. If the centers of green, blue and red do not coincide, the CRT projection angle must be adjusted.
Installation Adjustments 7-8 5975987A BARCODATA 708 260597 Loosen the four hexagon screws A, A', B and B', upper and lower fixation latch. These screws fasten the cooling house of the red tube. Pivot the red CRT until the center of the red image coincides with the center of the green image.
Installation Adjustments 7-9 5975987A BARCODATA 708 260597 ADJUSTM ENT MOD E source 1 Select wi th or then <E NTER> <EXIT> t o return GUIDE D RANDOM ACCESS INSTAL LATIO N SERVI CE IRIS After finishing the installation adjustments procedure, the 'Path selection' returns on the screen.
Installation Adjustments 7-10 5975987A BARCODATA 708 260597.
G2 Adjustment A-1 5975987A BARCODATA 708 260597 A G2 ADJUSTMENT Enter the adjustment mode by pressing ADJUST and highlight Service . Press ENTER to start up the service mode.
G2 Adjustment A-2 5975987A BARCODATA 708 260597 A green LED for each color is mounted on the driver board, below the CRT's. When selecting the G2 adjustment menu, these green LEDs must be out. If not, follow the procedure to adjust the G2 : - Loosen the retaining screws of the upper electronic chassis and pivot it to the lenses.
FORMULA OUTSIDE PACKAGE DIMENSIONS (Inches) CHEMICAL FAMILY FEDERAL STOCK NUMBER (FSN) GROSS WEIGHT (LBS) % TRESHOLD LIMIT VALUE (Units) ALLOYS AND METALLIC COATINGS % % PIGMENTS SOLVENTS ADDITIVES CATALYST VEHICLE HAZARDOUS MIXTURES OF OTHER LIQUIDS, SOLIDS, OR GASES APPEARANCE AND ODOR BOILING POINTS (°C.
STABILITY UNSTABLE STABLE CONDITIONS TO AVOID INCOMPATABILITY (Materials to avoid) HAZARDOUS DECOMPOSITION PRODUCTS HAZARDOUS POLYMERIZATION WILL NOT OCCUR CONDITIONS TO AVOID MAY OCCUR STEPS TO BE TA.
An important point after buying a device Barco DATA 708 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Barco DATA 708 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Barco DATA 708 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Barco DATA 708 you will learn all the available features of the product, as well as information on its operation. The information that you get Barco DATA 708 will certainly help you make a decision on the purchase.
If you already are a holder of Barco DATA 708, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Barco DATA 708.
However, one of the most important roles played by the user manual is to help in solving problems with Barco DATA 708. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Barco DATA 708 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
