Instruction/ maintenance manual of the product VMS-2 Speco
Go to page of 6
VMS-2 4” Color LCD Service Monitor Kits User ’ s Manual.
Copyright @1998 by this company . No Part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or any means. Electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company .
I. CONTENTS : 1. 4” LCD monitor 2. Carry Bag and Belts 3. 1000mA Rechargeable Ni-H Battery 4. Three velcos , two for monitor and one for battery . 5. 30 cm power cord. 6. 15V DC Charger . This Charger should only be used to charge the battery NOT to supply the unit.
III. LCD Monitor Operation and Connections : Controls and Connectors on LCD monitor: 1. Brightness control 2. Contrast Control 3. V olume control for headphones 4. Audio output for headphones 5. Main Power switch 6. V ideo Left-Right Reverse Switch 7.
iii.. Connections 1) Connect the video source to the V ideo input 1(9) or V ideo 2(10) Inputs. 2) Select the correct V ideo input using the Video Input switch (1 1). 3) Connect the Audio source to the audio input (7). 4) Connect an electronically regulated 12V power supply The positive pole must be connected to the center contact.
vi. T echnical Data LCD technology: TFT active matrix Display size: 4” Active area : 82.1 x 61.8 mm Color system: NTSC or P AL Sync. :.Horizontal :15, 625 Hz, V ertical : 50 Hz. Resolution: 480 x 234 , 1 12,320 Pixels Audio level: 1V/10k V ideo Input : 1Vpp 75 £[ Dimensions ( Bag ) :190.
An important point after buying a device Speco VMS-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Speco VMS-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Speco VMS-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Speco VMS-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Speco VMS-2 will certainly help you make a decision on the purchase.
If you already are a holder of Speco VMS-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Speco VMS-2.
However, one of the most important roles played by the user manual is to help in solving problems with Speco VMS-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Speco VMS-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
