Instruction/ maintenance manual of the product BigHit Specialized
Go to page of 14
1 OWNER’S MANUAL.
2 3.
2 3 T ABLE OF CONTENTS Introduction........................................................................ Seat Post Setup................................................................. Frame Features................................................
4 5 Congratulations on your purchase and welcome to the nest line of suspension bikes available! About this Manual This manual is designed to be used in conjunction with the Bicycle Owner’s Manual and owner’s manuals supplied by the manufacturer of the front and rear suspension components.
4 5 As activities such as racing, jumping, severe off road riding, and stunt riding are extremely dangerous, SAFETY should always be the rst consideration. Don’t ride in the race, ride hard of f road, try the jump, or do the stunt, UNLESS YOU CAN DO SO SAFEL Y .
6 7 SEA TPOST MINIMUM EXTENSION: All Specialized full suspension models with interrupted seat tubes have a small hole to identify the minimum extension allowed for your seatpost. If you cannot see the seatpost tube through this hole, your seatpost is too far extended.
6 7 1. Main Frame 2. Seatstay 3. Chainstay 4. Shock Link 5. Main Pivot 6. Dropout (Horst) Pivot 7. Shock Link at Seatstay Pivot 8. Shock Link at Frame Pivot 9.
8 9 * TT length is the Horizontal Measurement from the center -line of the HT at the top of the HT to the center-line of the projected seat tube. ** Stand Over height is measured vertically at the centerpoint of the TT measurement. BIG HIT FSR FRAME GEOMETR Y Small (mm) 578 776 128 68.
8 9 BIG HIT FSR FRAME GEOMETR Y 5 1 3 8 6 2 7 4.
10 11.
10 11 Bearing Kit Parts Bolt Kit Parts NOTE: Bearing and Bolt Kits are available only through your local Specialized dealer . T o retain your warranty and for your safety , all maintenance should be performed by your local Specialized dealer .
12 13 SBC LIMITED WARRANTY Specialized Bicycle Components, Inc. (“Specialized”), a California corporation located at 15130 Concord Circle, Morgan Hill, California 95037, makes the following Limite.
12 13 USEFUL PRODUCT LIFE CYCLE Every Specialized bicycle and frameset has a useful product life cycle. The length of that useful product life cycle will vary with the construction and materials of th.
14 15130 Concord Circle Morgan Hill, CA 95037 www .specialized.com © 2003 Specialized Bicycles PN# W2040159.
An important point after buying a device Specialized BigHit (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Specialized BigHit yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Specialized BigHit - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Specialized BigHit you will learn all the available features of the product, as well as information on its operation. The information that you get Specialized BigHit will certainly help you make a decision on the purchase.
If you already are a holder of Specialized BigHit, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Specialized BigHit.
However, one of the most important roles played by the user manual is to help in solving problems with Specialized BigHit. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Specialized BigHit along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
