Instruction/ maintenance manual of the product CC-AT100 Cateye
Go to page of 20
CC-AT100 WITH ALTIMETER FUNCTION 500 M eter 490 480 470 460 450 440 430 420 410 400 15000 Feet 14700 14400 14100 13800 13500 13200 12900 12600 12300 12000 50 40 30 20 10 0 -10 -20 -30 -40 -50 1500 120.
E 2 INSTRUCTION MANUAL Introduction Thank you f or purchasing CA TEYE CYCLOCOMPUTER Model CC-A T100. As w ell as cyclocomputer function, this model has altimeter function, which measures altitude and atmospheric temperature, by sensing the changes of the atmospheric pressure with the pressure-sensor .
E 3 INDEX Names -------------------------------------------------------------------------------------------- 4 For Safe Operations (Important) ----------------------------------------------------------- 5 Set Up 1. How to Put in a Battery -------------------------------------------------------- 6 2.
E 4 NAMES Main Unit A Display 1 Main Display 2 Sub Display 3 Bicycle Symbol 4 Altitude Symbol 5 Mode Symbol 6 Speed Scale Symbol 7 Temperature Scale Symbol 8 Auto (Automatic Start/Stop) Function Symbo.
E 5 FOR SAFE OPERATIONS (IMPORTANT) For safe and appropriate use, always observe the following. Caution: • Don't pay too much attention to your cyclocomputer functions when riding. Keep your eyes on the road and give due consideration to safe riding.
E 6 Battery Cover Close Open CR2032 Fig.1 SET UP 1. How to Put in a Battery 1. Remove the battery cover on the back with a coin or a similar opener (Fig. 1). 2. Insert a new lithium battery (CR2032) with the (+) pole upward as illustrated. Close the cover securely.
E 7 -3. Setting Temperature Scale When the process of setting speed scale is completed, " ° C" symbol illuminates (Fig. 4). With each press of the S/S button, " ° C" and " ° F" appears alternately. Select the desired scale and press the Set button to fix the scale.
E 8 • Each main mode has its respective sub mode. To switch to the sub mode, hold down this button. To switch back to the main mode from the sub mode, just press this button ordinarily. To shift from one mode to another, it is necessary to switch back to the main mode (from the sub mode) each time.
E 9 Reset When the S/S button and the Mode button are pressed simultaneously, the following data can be reset, depending on the mode. For resetting trip distance(D), elapsed time(T), average speed.
E 10 may cause even a greater change. In seemingly stable weather conditions, you may expect to see the Altitude fluctuate as much as 100 feet from morning to evening because of the warming aspects of the sun on the atmosphere. 2. Cycling Mode (Bicycle Symbol: on) (Fig.
E 11 How to Correct the Altitude First display the main mode showing , with the operation of the Mode button. Press the Set button when the speed is zero, and it turns to the correction mode (Fig.13). The figure increases with each press of the S/S button, and decreases with each press of the Mode button.
E 12 • Secure the wire with the wire securing tape as in Fig. 20. Wind the wire round the outer cable up to the handlebar. When ad- justing the length, be careful that the wire will not hinder handle- bar operation. • By using the rubber pad, attach the bracket close to the handle- bar stem (Fig.
E 13 3. Power Saving Function When the main unit is left without receiving any signal for about 5 minutes continuously, power supply is shut down and the unit will be in "sleep" state displaying only the clock time (Fig.
E 14 A Average Speed (Main Mode) Displays the average speed from the start to the current point on the sub display. With Reset opera- tion, it returns to zero. When the elapsed time exceeds approx. 34 hours or the trip distance exceeds 2683.30 km [mile], the unit stops calculation of average speed and (E) mark appears.
E 15 M Maximum Speed (Sub Mode) Displays the maximum instantaneous speed on the sub display. With the Reset operation, it returns to zero. 0.0 (2.6) - 105.9 km/h [0.0 (1.6) - 62.9 mile/h] ° C/ ° F Temperature (Sub Mode) Measures the current atmospheric temperature in every 20 seconds and displays the figure on the main display.
E 16 Incorrect data appears. The static electricity may cause an incorrect display. Press the AC button and reset the speed scale and the clock time again. Current speed does not appear. Is there anything on the contact of the main unit or the bracket? Wipe the contact clean.
E 17 DAILY CARE If the altitude sensor cover is clogged with mud etc., the unit doesn't measure altitude. After the ride on muddy roads or in the rain, check the situation of the sensor cover according to the following instruction. 1. Turn the sensor cover counterclockwise with a screwdriver and take it off.
E 18 SPECIFICATIONS Display Ranges Current Speed S 0.0(2.6) - 105.9 km/h (27 inch) ± 0.5 km/h (under 50 km/h) [0.0(1.6) - 62.9 mile/h ± 0.5 mile/h (under 31 mile/h)] Total Distance O 0.0 - 42949 km [mile] ± 0.1 km [mile] Maximum Speed M 0.0(2.6) - 105.
E 19 SETTING VALUES CROSS REFERENCE TABLE *The tire size is marked on both sides of the tire. LIMITED WARRANTY 2-Year Warranty: Only Main Unit (excluding battery) If trouble occurs during normal use specified in this manual, the part is repaired or replaced free of charge.
U.S. Pat. Nos. 4633216/4642606/5236759/5226340, Pat. Pending and Design Patented. 2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan Phone: 81-6-6719-7781 Fax: 81-6-6719-2362 ® CO .
An important point after buying a device Cateye CC-AT100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cateye CC-AT100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cateye CC-AT100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cateye CC-AT100 you will learn all the available features of the product, as well as information on its operation. The information that you get Cateye CC-AT100 will certainly help you make a decision on the purchase.
If you already are a holder of Cateye CC-AT100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cateye CC-AT100.
However, one of the most important roles played by the user manual is to help in solving problems with Cateye CC-AT100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cateye CC-AT100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
