Instruction/ maintenance manual of the product SY-6BE+ SOYO
Go to page of 18
SY-6BE+ Motherboard Quick Start Guide Hardware Installation Quick BIOS Setup Introduction The SOYO CD.
SOY O ™ 2 SY-6BE+ Motherboard Pentiu m ® III, Pentiu m ® II & Celeron TM processors 82440 BX AGP/PCI Motherboard 66&100MHz Front Side Bus supported ATX Form Factor Copyright © 1999 by Soyo Computer Inc. Trademarks: Soyo is a registered trademark of Soyo Computer Inc.
SY-6BE+ Quick Start Guide 3 Introduction 1 1 Introduction Congratulations on your purchase of the SY-6BE+ Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation.
SY-6BE+ Quick Start Guide 4 Introduction SY-6BE+ Motherboard Layout Key Features Ø Supports Intel Pentium ® III processor (450- 600MHz), Pentium ® II processor (233-450MHz) & Celeron TM process.
SY-6BE+ Quick Start Guide 5 Hardware Installation 2 2 Installation To avoid damage to your Motherboard, follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis.
SY-6BE+ Quick Start Guide 6 Hardware Installation Install the Motherboard Follow the steps below in order to perform the installation of your new SY-6BE+ Motherboard. Step 1. Install the CPU Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover.
SY-6BE+ Quick Start Guide 7 Hardware Installation Step 2. Make Connections to the Motherboard This section tells how to connect internal peripherals and power supply to the Motherboard.
SY-6BE+ Quick Start Guide 8 Hardware Installation Step 3. Configure Memory Your board comes with three DIMM sockets, providing support for up to 768MB of main memory using DIMM modules from 8MB to 256MB. For 66MHz front side bus CPUs use 12ns or faster memory; for 100MHz front side bus CPUs use 8ns (100MHz, PC100 compliant) memory.
SY-6BE+ Quick Start Guide 9 Hardware Installation Step 6. Clear CMOS Data (JP5) Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5 for at least 5 seconds, and then by shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white colored cap.
SY-6BE+ Quick Start Guide 10 Quick BIOS Setup 3 3 Quick BIOS Setup This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO SETUP].
SY-6BE+ Quick Start Guide 11 The SOYO CD 4 4 The S OY O CD The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT.
SY-6BE+ Quick Start Guide 12 The SOYO CD The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file , the appropriate Acrobat Reader software must be installed in your system.
SY-6BE+ Quick Start Guide 13 The SOYO CD (Driver Installation Menu) However, to display the list of all drivers software available with SOYO Motherboards, click the Display all drivers on the SOYO CD button. Please make sure to install only the drivers adapted to your system, or otherwise this cause system malfunctions.
SY-6BE+ Quick Start Guide 14 The SOYO CD Note: Once you have selected a driver, the system will automatically exit the SOYO CD to begin the driver installation program. When the installation is complete, most drivers require to restart your system before they can become active.
SY-6BE+ Quick Start Guide 15 How to contact us: n If you are interested in our products, please contact the SOYO sales department in the region you live. n If you require Technical Assistance, please contact our Technical Support in the region you live.
SY-6BE+ Quick Start Guide 16 E-Mail: support@soyo.co.uk SOYO Deutschland GmbH August-Wilhelm-K u hnholz-Str. 15 D-26135 Oldenburg Region Covered: Germany Web Site: www.saat.de , www.soyo- saat.com , www.soyo-saat.de Vertrieb Mainboards , Notebooks und SoyoCom Produkte: E-Mail: sales@soyo.
.
Edition: December 1999 Version 2.4 SY-6BE+ SERIAL.
An important point after buying a device SOYO SY-6BE+ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SOYO SY-6BE+ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SOYO SY-6BE+ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SOYO SY-6BE+ you will learn all the available features of the product, as well as information on its operation. The information that you get SOYO SY-6BE+ will certainly help you make a decision on the purchase.
If you already are a holder of SOYO SY-6BE+, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SOYO SY-6BE+.
However, one of the most important roles played by the user manual is to help in solving problems with SOYO SY-6BE+. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SOYO SY-6BE+ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
