Instruction/ maintenance manual of the product SY-5SSM SOYO
Go to page of 88
SY-5SSM SY-5SSM/5 Super 7 Motherboard ************************************************ Pentiu m ® Class CPU supported SiS530 PCI/AGP Motherboard Micro-ATX Form Factor 3D AGP & Audio On-board .
Declaration of Conformity According to 47 CFR, Part 2 and 15 of the FCC Rules Declaration No.: D920207 1999/3/6 The following designated product EQUIPMENT: Main Board MODEL NO.: SY-5SSM which is the Class B digital device complies with 47 CFR Parts 2 and 15 of the FCC rules.
SOY O ™ SY-5SSM & SY-5SSM/5 iii About This Guide This User's Guide is for assisting system manufacturers and end users in setting up and installing the Motherboard. Information in this guide has been carefully checked for reliability; however, no guarantee is given as to the correctness of the contents.
Table of Contents SY-5SSM & SY-5SSM/5 iv Table of Contents SY-5SSM & SY-5SSM/5 MOTHERBOARD L AYOUT .......................... 1 CHAPTER 1 INTRODUCTION ........................................................... 1 1-1 KEY FEATURES .............
SY-5SSM & SY-5SSM/5 Motherboard Layout 1 SY-5SSM & SY-5SSM/5 Motherboard Layout Back Panel SY-5SSM & SY-5SSM/5 Platform ® COM 1 PR T USB 1 USB 2 PS/2 K B Connecto r PS/2 Mous e Connector VG A LINE-I N LINE-OU T MIC JAC K JOYSTIC K for model 5SSM onl y (1 MB Cache) featurin g two P.
Introduction SY-5SSM & SY-5SSM/5 2 Chapter 1 INTRODUCTION The SY-5SSM & SY-5SSM/5 AGP/PCI Motherboard is a high- performance MICRO-ATX form-factor system board. SY-5SSM & SY-5SSM/5 use the SiS530 PCI Chipset technology and support Pentiu m ® class processors.
Introduction SY-5SSM & SY-5SSM/5 3 SY-5SSM & SY-5SSM/5 PL A TFORM FE A TURES Board Size 4-layer PCB, 22x24.4cm(8.7 ” x9.6 ” ), MICRO-ATX Form Factor Socket 7 Socket for Pentiu m ® class C.
Introduction SY-5SSM & SY-5SSM/5 4 FDC 1 Floppy Disk Drive (FDD) Port (Supports 1.2MB/1.44MB/2.88MB and LS120/3- mode FDD) COM2 1 x 9-pin RS-232 Serial Connector IR1 5-pin Serial Infrared Device C.
Introduction SY-5SSM & SY-5SSM/5 5 1-2 HANDLING THE MOTHERBOARD To a void damage to your Motherboard, follow these simple rules while unpacking: Ø Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis.
Hardware Setup SY-5SSM & SY-5SSM/5 6 Chapter 2 HARDWARE SETUP Congratulations on your purchase of SY-5SSM or SY-5SSM/5 Super 7 Motherboard. You are about to install and connect your new Motherboard. Note: Do not unpack the Motherboard from its protective anti-static packaging until you have made the following preparations.
Hardware Setup SY-5SSM & SY-5SSM/5 7 2-2 Unpacking the Motherboard When unpacking the Motherboard, check for the following items: Ø The SY-5SSM or SY-5SSM/5 SiS530 PCI/AGP Motherboard Ø This Qui.
Hardware Setup SY-5SSM & SY-5SSM/5 8 2-3 Installation Guide We will now begin the installation of the Motherboard. Please follow the step-by-step procedure designed to lead you to a complete and correct installation. Step 1. CPU Installation Follow these instructions to install your Pentiu m ® class processor correctly.
Hardware Setup SY-5SSM & SY-5SSM/5 9 Follow these steps to install the CPU in the Socket 7: 1. Lift the socket handle up to a vertical position. 2. Align the blunt edge of the CPU with the matching pinhole distinctive edge on the socket. 3. Seat the processor in the socket completely and without forcing.
Hardware Setup SY-5SSM & SY-5SSM/5 10 Step 3. CPU Voltage Setting (JP30) Please verify the correct voltage with your dealer before installation. Use the following tables to set JP30 to the proper "Voltage Value", according to the specifications marked on your CPU: This Motherboard comes with pre-configured setting of CPU voltage.
Hardware Setup SY-5SSM & SY-5SSM/5 11 Those processors may come in various voltages on different markets. Therefore, always make sure you know the type of the CPU you are installing and adjust the settings on JP30 accordingly. This Motherboard supports CPU voltages from 2.
Hardware Setup SY-5SSM & SY-5SSM/5 12 Voltage Settings for Various Processors Processor Voltage Setting Voltage Value: JP30 Intel P54C - 100 Intel P54C - 133 Vcore:3.3V VI/O:3.3V Intel P54C - 166 Intel P54C - 200 Vcore:3.52V VI/O:3.52V Intel P55C - 166 Intel P55C - 200 Intel P55C - 233 Vcore:2.
Hardware Setup SY-5SSM & SY-5SSM/5 13 Voltage Settings for Various Processors (continued) Processor Voltage Setting Voltage Value: JP30 Cyrix 6x86(L) PR166+ Cyrix 6x86(L) PR200+ The Cyrix 6x86(L) come in several versions with different voltages. Please ask your dealer for the correct voltage.
Hardware Setup SY-5SSM & SY-5SSM/5 14 Step 4. CPU Frequency Setting (SW1,JP32) The SY-5SSM or SY-5SSM/5 Motherboard is designed to support most Pentiu m ® class processors currently on the market. Jumpers SW1 and JP32 are used to configure the Motherboard frequency parameters to match the working frequency of your CPU.
Hardware Setup SY-5SSM & SY-5SSM/5 15 l CPU FREQUENCY & SDRAM frequency SETTING (SW1,JP32) Configure the SW1 jumpers to the settings that match your CPU speed. Refer to the following tables to set the Frequency Multiplier and Host Bus Frequency of your CPU: Frequency Multiplier: SW1 Multiplier 1-2 3-4 5-6 1.
Hardware Setup SY-5SSM & SY-5SSM/5 16 Please refer to the following table that gives you the correct frequency settings for the specific brand and model of CPU you are installing on this Motherboard.
Hardware Setup SY-5SSM & SY-5SSM/5 17 Frequency Settings for AM D ™ Processors Processor Frequency Setting Ratio Bus Clock PCI Clock CPU Host Bus Setting: JP32 Frequency Multiplier: SW1 AMD K5 - PR100 1.5 x 66MHz 33MHz AMD K5 - PR133 2.0 x 66MHz 33MHz AMD K5 - PR166 2.
Hardware Setup SY-5SSM & SY-5SSM/5 18 Frequency Settings for AM D ™ Processors (Continued) Processor Frequency Setting Ratio Bus Clock PCI Clock CPU Host Bus Setting: JP32 Frequency Multiplier: SW1 AMD K6-2 333 3.5 x 95MHz 31.7MHz AMD K6-2 350 3.
Hardware Setup SY-5SSM & SY-5SSM/5 19 Frequency Settings for Cyri x ™ Processors Processor Frequency Setting Ratio Bus Clock PCI Clock CPU Host Bus Setting: JP32 Frequency Multiplier: SW1 Cyrix 6x86 - PR166+ 2.0 x 66MHz 33MHz Cyrix 6x86 - PR200+ 2.
Hardware Setup SY-5SSM & SY-5SSM/5 20 Frequency Settings for Cyri x ™ Processors (Continued) Processor Frequency Setting Ratio Bus Clock PCI Clock CPU Host Bus Setting: JP32 Frequency Multiplier: SW1 Cyrix M II - 350** 3.0 x 90MHz 30MHz Cyrix M II - 366** 2.
Hardware Setup SY-5SSM & SY-5SSM/5 21 Frequency Settings for Ris e ™ Processors Processor Frequency Setting Ratio Bus Clock PCI Clock CPU Host Bus Setting: JP32 Frequency Multiplier: SW1 Rise mP6 PR266 3.0 x 66MHz 33MHz Rise mP6 PR266 2.0 x 100MHz 33MHz ** Set the proper CPU frequency according to the marking on the CPU.
Hardware Setup SY-5SSM & SY-5SSM/5 22 Step 5. DRAM Module Installation This Motherboard supports three DIMM banks from 8 to 256 MB with no other restrictions on memory configurations. You can install the memory in any combination without having to rely on a memory configuration table.
Hardware Setup SY-5SSM & SY-5SSM/5 23 l MEMORY CONFIGUR A TION This Motherboard features 3 x DIMM Banks for 168-pin 3.3V unbuffered DIMM modules Your board comes with three DIMM sockets, providing support for up to 768MB of main memory using DIMM modules from 8MB to 256MB.
Hardware Setup SY-5SSM & SY-5SSM/5 24 Connect one side of the 34-pin flat cable to the floppy drive and plug the other end to the floppy drive connector on the Motherboard.
Hardware Setup SY-5SSM & SY-5SSM/5 25 cause the system to restart the boot-up sequence. 3. Speaker Attach the 4-pin PC speaker cable from the case to the Speaker connector on the Motherboard. 4. ACPI/APM LED Connecting the 2-pin ACPI LED cable to the corresponding ACPI/APM connector on the motherboard.
Hardware Setup SY-5SSM & SY-5SSM/5 26 Step 9. Back Panel Connections All external devices such as the keyboard, printer, PS/2 mouse, modem, USB, monitor, joystick and audio devices (speakers/ headphones, microphone and CD/cassette player) can be plugged directly onto the Motherboard back panel.
Hardware Setup SY-5SSM & SY-5SSM/5 27 - and modem. Plug the serial device cables directly into the COM1 9-pin male connector located at the rear panel of the Motherboard. 2. Parallel Port PRT This parallel port is used to connect the printer or other parallel devices.
Hardware Setup SY-5SSM & SY-5SSM/5 28 Step 10. Other Connections 1. Serial Port COM 2 In addition to the onboard serial connector COM1 located at the rear panel, your Motherboard comes with a second serial port COM2 equipped with a flat cable and external connector.
Hardware Setup SY-5SSM & SY-5SSM/5 29 2. Wake-On-LAN (WOL) Attach the 3-pin connector from the LAN card which supports the Wake-On-LAN (WOL) function to the JP44 connector on the Motherboard. This WOL function lets users wake up the connected computer through the LAN card.
Hardware Setup SY-5SSM & SY-5SSM/5 30 4. CD Line-in (CDIN1,CDIN2) This Motherboard provides two CD-Line in connectors. Please connect the 4-pin audio cable from your CD-ROM drive to either CDIN1 or CDIN2. (It fits in only one, depending on the cable that came with your CD-ROM drive) Please install according to the following pin assignment: 5.
Hardware Setup SY-5SSM & SY-5SSM/5 31 Step 11. CPU Cooling Fan Installation After you have seated the CPU cooling fan properly on the processor, attach the 3-pin fan cable to the CPUFAN connector on the Motherboard. To a void damage to the system, install according to the following pin assignment: Step 12.
Hardware Setup SY-5SSM & SY-5SSM/5 32 Step 13. A TX Power Supply Plug the connector from the power directly into the 20-pin male ATX PW connector on the Motherboard, as shown in the following figure.
Hardware Setup SY-5SSM & SY-5SSM/5 33 3.3 V -12 V GN D PS-O N GN D GN D GN D -5 V 5V 5V 3.3V 3.3V GN D 5V GN D 5V GN D PW-O K 5VSB 12V ATX Powe r Please install the ATX power according to the following pin assignment: Ø Pay special care to the directionality.
Hardware Setup SY-5SSM & SY-5SSM/5 34 Step 15. CMOS Clearing (JP5) After you have turned off your computer, clear the CMOS memory by momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then restore JP5 to the initial 1-2 jumper setting in order to recover and retain the default settings.
Hardware Setup SY-5SSM & SY-5SSM/5 35 Step 18. CACHE CONFIGUR A TION This Motherboard has a built-in 512KB/1MB Level 2 Pipelined Burst cache onboard to improve the system performance.
Hardware Setup SY-5SSM & SY-5SSM/5 36 Repeat this operation until you get the following screen. 3. The BIOS Setup screen appears: You are now ready to configure your system with the BIOS setup program. Go to Chapter 3: BIOS SETUP ROM PCI/ISA BIOS CMOS SETUP UTILITY AWARD SOFTWARE, INC.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 37 Chapter 3 BIOS SETUP UTILITY This Motherboard's BIOS setup program uses the ROM PCI/ISA BIOS program from Award Software Inc. To enter the Award BIOS program's Main Menu: 1. Turn on or reboot the system.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 38 Hot Keys: Function keys give you access to a group of commands throughout the BIOS utility. Function Command Description F1 Help Gives the list of options available for each item. Shift F2 Color Change the color of the display window.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 39 3-1 STANDARD CMOS SETUP Select the [STANDARD CMOS SETUP] option from the Main Menu and press [Enter] key. This screen allows you to modify the basic CMOS settings. After you have completed the changes, press [Esc] key to return to the Main Menu.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 40 3-1.2 Hard Disks Type & Mode Choose the type and mode for the hard disks that you have already installed. Primary (Secondary) Master & Slave Setting Description Note Auto BIOS detects hard disk type automatically.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 41 3-1.4 Video Select the video mode: EGA/VGA (Default), CGA 40, CGA 80, Mono (Monochrome). 3-1.5 Halt On When the BIOS detects system errors, this function will stop the system.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 42 3-2 BIOS FE A TURES SETUP Select the [BIOS FEATURES SETUP] option from the Main Menu and press [Enter] key.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 43 3-2.1 Virus Warning Setting Description Note Disabled Default Virus Warning Enabled Enable this option to protect the boot sectors and partition tables of your hard disk. Any attempt to write to them will the system to halt and display a warning message.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 44 3-2.3 System Boot Control Settings System Boot Control Settings Setting Description Note Disabled Quick Power On Self Test Enabled Provides a fast POTS at boot-up.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 45 3-2.4 Typematic Settings Typematic Settings Setting Description Note Disabled Default Typematic Rate Setting Enabled Enables to adjust the keystroke repeat rate.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 46 3-2.5 Other Control Options Other Control Options Setting Description Note Setup Use this feature to prevent Unauthorized system boot-up or use of BIOS Setup. “ Setup ” , If a password is set, the password prompt only appears if you attempt to enter the Setup program.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 47 Other Control Options (Continued) Other Control Options Setting Description Note Disabled Enabled Video or Adapter BIOS Shadow The BIOS is shadowed in a 16K segment if it is enabled and if it has BIOS present.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 48 3-3 CHIPSET FE A TURES SETUP Caution: Change these settings only if you are already familiar with the Chipset. The [CHIPSET FEATURES SETUP] option changes the values of the chipset registers. These registers control the system options in the computer.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 49 CHIPSET FE A TURES SETUP CHIPSET FE A TURES Setting Description Note Ref/Act Command Delay 6T 5T,7T, 8T Set the DRAM clock of the refresh command to refresh/active command delay. Default Refresh Queue Depth 12 0, 4, 8, Set the depth of refresh queue.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 50 CHIPSET FE A TURES SETUP (Continued) CHIPSET FE A TURES Setting Description Note Disabled Default Linear Mode SRAM Support Enabled Select Enabled if your system contains a CPU that requires linear mode (e.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 51 CHIPSET FE A TURES SETUP (Continued) CHIPSET FE A TURES Setting Description Note Disabled Default Enabled Some interface cards will map their ROM address to this area. If this occurs, select [Enabled] in this field.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 52 3-4 POWER MANAGEMENT SETUP The [POWER MANAGEMENT SETUP] sets the system's power saving functions. ROM PCI/ISA BIOS POWER MANAGEMENT SETUP AWARD SOFTWARE, INC.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 53 3-4.1 Power Management Controls Power Management Controls Setting Description Note Disabled Default ACPI function Enabled Enabled if you use Windows 98 and want to use ACPI User Define Lets you define the HDD and system power down times.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 54 Power Management Controls (Continued) Power Management Controls Setting Description Note 1/8 Default Stdby Speed (div by) 1~8 Select a divisor to reduce the CPU speed during Standby mode to a fraction of the full CPU speed.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 55 3-4.2 PM Timers PM Timers Setting Description Note The following [HDD Power Down] field may be configured only if [Power Management] is set to [User Defin.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 56 3-4.3 PM Events PM Events Setting Description Note Disabled HDD Ports Activity Enabled When set to Enabled (default), any event occurring at a HDD (serial) port will awaken a system which has been powered down.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 57 PM Events (Continued) PM Events Setting Description Note Disabled Default IRQ 8 Break Suspend Enabled You can Enable or Disable monitoring of IRQ8 (the Real Time Clock) so it does not awaken the system from Suspend mode.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 58 3-5 PNP/PCI CONFIGUR A TION SETUP This option sets the Motherboard's PCI Slots. ROM PCI/ISA BIOS PNP/PCI CONFIGURATION SETUP AWARD SOFTWARE, INC.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 59 3-5.1 PNP/PCI Configuration Controls PNP/PCI Controls Setting Description Note Manual BIOS does not manage PCI/ISA PnP card IRQ assignment.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 60 3-5.3 PNP/PCI Configuration Setup PNP/PCI Setup Setting Description Note Under this item the user can assign an IRQ to a PCI slot. However, there under some conditions the IRQ will not be assigned as selected under this item: 1.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 61 3-6 LOAD SETUP DEFAULTS Select the [LOAD SETUP DEFAU LTS] option from the Main Menu to load the system values you have previously saved. This option is recommended if you need to reset the system setup and to retrieve the old values.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 62 3-8 INTEGR A TED PERIPHERALS Caution: Change these settings only if you are already familiar with the Chipset. The [INTEGRATED PERIPHERALS] option changes the values of the chipset registers. These registers control the system options in the computer.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 63 3-8.1 IDE Device Controls IDE Controls Setting Description Note Both Default Disabled Primary Internal PCI/IDE Secondary Selects which PCI IDE controller to use. The following fields may be configured only if [Internal PCI/IDE] is set to [Both], [Primary], or [Secondary].
BIOS Setup Utility SY-5SSM & SY-5SSM/5 64 3-8.2 FDC Controls FDC Controls Setting Description Note Disabled Turn off the on-board floppy controller Onboard FDC controller Enabled Use the on-board floppy controller Default 3-8.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 65 3-8.6 Parallel Ports Parallel Ports Setting Description Note ECP + EPP Normal Default EPP Parallel Port Mode ECP The mode depends on your external device that connects to this port.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 66 3-8.10 VGA Shared Control Setting VGA Shared Control Setting Setting Description Note VGA Shared Memory Size 2 MB 4-8 MB None VGA memory size shared with system memory.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 67 3-9 SUPERVISOR PASSWORD Based on the setting you have made in the [Security Option] of the [BIOS FE ATURES SETUP] section, the password prevents access to the system or the setup program by unauthorized users.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 68 3. Enter your new password and press [Enter]. The following message appears, prompting to confirm the new password: 4.
BIOS Setup Utility SY-5SSM & SY-5SSM/5 69 3-11 IDE HDD AUTO DETECTION This Main Menu function automatically detects the hard disk type and configures the STANDARD CMOS SETUP accordingly.
Drivers Installation SY-5SSM & SY-5SSM/5 70 Chapter 4 DRIVERS INSTALLATION Your SY-5SSM or SY-5SSM/5 Super 7 ™ Motherboard comes with a CD-ROM labeled "SOYO CD.
Drivers Installation SY-5SSM & SY-5SSM/5 71 Step 2. Install Drivers and Utilities Click the Install Drivers button to display the list of drivers software that can be installed with your Motherboard. The Start Up program displays the drivers available for the particular model of Motherboard you own.
Drivers Installation SY-5SSM & SY-5SSM/5 72 Note1: If you install the SOYO SpeedPro Busmaster drivers, you can NOT install the SiS Busmaster drivers. Note2: The SOYO SpeedPro Busmaster driver does not support ATA-66 Hard disk drives. Do not install this driver if you use an ATA-66 HDD.
Drivers Installation SY-5SSM & SY-5SSM/5 73 If you want to see all the drivers available on the SOYO – CD, click the Display all drivers on the SOYO CD button. Do NOT install drivers that are not suitable for your board, otherwise your system may crash.
Onboard VGA and Audio SY-5SSM & SY-5SSM/5 74 Chapter 5 Onboard VGA and Audio 5-1 Onboard VGA This Motherboard offers an onboard Video Graphics Accelerator (VGA), provided by the SiS530 chipset and related application programs.
Onboard VGA and Audio SY-5SSM & SY-5SSM/5 75 Video Functions l Support single frame buffer architecture to save the DRAM cost l Support graphics/video overlay function by color-key and/or chroma-k.
Onboard VGA and Audio SY-5SSM & SY-5SSM/5 76 5-2 Onboard Joystick Port A joystick, in computer graphics, is a lever with at least two degrees of freedom used as an input device. The joystick is normally used as a locator in at least a 2-D plane. The joystick device is most widely used in video games applications.
Onboard VGA and Audio SY-5SSM & SY-5SSM/5 77 Software Support l Windows 3.1 l Windows 95/98 l Windows NT 4.0 l Windows Sound System l All DOS-based Games Compatibility l Sound Blaste r ™ l Sound.
Onboard VGA and Audio SY-5SSM & SY-5SSM/5 78 Connecting Speakers You can connect external speakers to the "Line-out" port on your SY-5SSM or SY-5SSM/5 Motherboard. Note: This Motherboard requires a speaker with built-in amplifier (Amplified Speaker) to generate proper output sound volume.
Onboard VGA and Audio SY-5SSM & SY-5SSM/5 79 The audio control panel appears as shown in the following figure. The audio mixer gives control of the sound inputs of all audio devices. You can adjust the internal volume and balance of each individual audio device.
SiS VGA Driver Installation SY-5SSM & SY-5SSM/5 80 Chapter 6 SIS VGA DRIVER INSTALL ATION Introduction Your SY-5SSM or SY-5SSM/5 Motherboard is equipped with the SiS530 chipset that offers extended graphics and text modes capabilities.
SiS VGA Driver Installation SY-5SSM & SY-5SSM/5 81 3. Select [Settings] index in the display properties sheet. 4. Select [Change Display Type] button. 5. Select [Chang e … ] button in [Adapter Type] group. 6. Select [Have Disk] button. 7. Place CD-ROM disk into the CD drive.
ES S ™ Audio Driver Installation SY-5SSM & SY-5SSM/5 82 Chapter 7 ES S ™ AUDIO DRIVER INSTALL ATION This section describes how to perform the ES S ™ audio driver installation in Windows ® 95/98 environment. The Windows NT drivers can be installed automatically through the SOYO CD.
ES S ™ Audio Driver Installation SY-5SSM & SY-5SSM/5 83 This completes the Window s® 95/98 installation. The program will continue to load and when it is complete, you should hear the Window s® 95/98 start-up wave file.
84.
An important point after buying a device SOYO SY-5SSM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SOYO SY-5SSM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SOYO SY-5SSM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SOYO SY-5SSM you will learn all the available features of the product, as well as information on its operation. The information that you get SOYO SY-5SSM will certainly help you make a decision on the purchase.
If you already are a holder of SOYO SY-5SSM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SOYO SY-5SSM.
However, one of the most important roles played by the user manual is to help in solving problems with SOYO SY-5SSM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SOYO SY-5SSM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
