Instruction/ maintenance manual of the product FM2552/FM2000 Southwestern Bell
Go to page of 13
STOP - DON'T T AKE ME BACK TO THE ST ORE. LOOK - FOR THE TOLL-FREE "HELP" TELEPHONE NUMBER. LISTEN - AS THE EXPER TS T ALK YOU THROUGH THE PROBLEM.
IMPORT ANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALW AYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions.
3 S o u t h w est e r n B e l l S o u t h we s t e r n B e l l FLAS H M1 M2 M3 MEMORY MUTE STORE REDIAL RESET Location of T elephone Controls RECEIVER VOLUME CONTROL MEMORY BUTTON MUTE BUTTON REDIAL B.
Redial Erase Review New Call S o u t h w e s t e r n B e l l Caller ID BASE HOOK SWITCH BATTER Y COMPAR TMENT COIL CORD ERASE BUTTON REDIAL BUTTON LCD DISPLAY NEW CALL LED REVIEW BUTTON Location of Ca.
INSTALLA TION FOLLOW THESE PRECAUTIONS BEFORE INSTALLA TION: 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
Setting Up Y our FM2552/FM2000 When setting the FM2552/FM2000 to receive Caller ID information, THE HANDSET OF THE UNIT MUST BE IN THE BASE (ON HOOK). NOTE: Do not lift the handset until you are finished setting the Caller ID information. To Set Language 1.
T elephone Operation Receiving a Call 1. When you hear your phone ring, lift the HANDSET. After the second ring, the caller's name and telephone number will display on the LCD if you have CID service. The NEW CALL LED and the NEW CALL ICON will flash.
PM PM PM Memory Dialing 6. To continue programming priority numbers, repeat steps 2 through 5. To end programming numbers, return the HANDSET to the CRADLE. If you wish to enter a 4-second Pause in the number you are storing, press the REDIAL Button at the desired point in the number.
Memory Dialing Reviewing New Call Records NOTE: The handset must be in the base to review Caller ID information. 6. To continue storing numbers, repeat steps 2 through 5. T o end, return the HANDSET to the CRADLE. To Dial Priority Numbers: 1. Pick up Handset.
17 Caller ID Features 3. When you lift the handset, "PICKUP PHONE" will clear and the number will be automatically dialed. With current Telecom redialing situations, there are 4 redial options: (1) 7 digits without a 1 prefix; (2) 7 digits with a 1 prefix; (3) 10 digits without a 1 prefix; and (4) 10 digits with a 1 prefix.
20 PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION The display screen is blank. The battery needs to be installed or replaced. Adjust the contrast level. If that doesn't work, replace the 3AA alkaline batteries. You cannot redial a call record. Your local area code is not programmed.
21 FCC W ANTS YOU TO KNOW This equipment complies with Part 68 of the FCC rules. On the bottom of the base of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment.
23 24 LIMITED W ARRANTY This warranty is also rendered invalid if this product is removed from the country in which it was purchased, if it is used in a country in which it is not registered for use, and/or if it is used in a country for which it was not designed.
An important point after buying a device Southwestern Bell FM2552/FM2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Southwestern Bell FM2552/FM2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Southwestern Bell FM2552/FM2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Southwestern Bell FM2552/FM2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Southwestern Bell FM2552/FM2000 will certainly help you make a decision on the purchase.
If you already are a holder of Southwestern Bell FM2552/FM2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Southwestern Bell FM2552/FM2000.
However, one of the most important roles played by the user manual is to help in solving problems with Southwestern Bell FM2552/FM2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Southwestern Bell FM2552/FM2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
