Instruction/ maintenance manual of the product SOUTH BEND LATHE CO.. SB1024 South bend
Go to page of 100
Hundr eds of Thousands of Lathes Sold W ith a T radition of Q uality Since 1906! Copyright © Mar ch, 2010. R evised April, 2011 (BL) F or Machines Mfg .
Customer Ser vice We stand behind our machines. If you have any service questions, parts requests or general questions about the machine, feel free to contact us.
T able of Contents INTRODUCT ION About These Machines......................................... 3 Foreword ............................................................. 3 Capabilities ......................................................... 3 Features .
South Bend Vertical Spindle Precision Milling Machine (circa 1958) SB1025 Electrical Box ....................................... 68 SB1025 Electrical Components ......................... 69 SB1025 Electrical Component Pictures ............ 70 P ARTS Headstock .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -3- I N TRODUCT ION Ab out T hese Mac hines Capabilities These Milling Machines are built for daily, non-stop use in a busy industrial setting, tool room, or school shop. They are easy to set-up, truly accurate, and built to give you long years of service when properly cared for.
-4- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 I NT RODUCTION F ront V iew Identification Figure 1. Identification—front view (Model SB1024 shown).
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -5- I N TRODUCT ION Model S B1024 Belt Housing & Headstoc k Identification Figure 2.
-6- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 I NT RODUCTION Model S B1025/S B1026 Belt Housing & Headstoc k Identification Motor Assembly Manual/ Power Downfeed Selector .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -7- I N TRODUCT ION Model S B1024 9" x 42" V ariable Speed Milling Mac hine w/ Power F eed Product Dimensions: Weight .........................................................
-8- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 I NT RODUCTION Distance Range Spindle to Column .............................................................................................. ....................... 6"–19 " Distance Range Spindle to Table .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -9- I N TRODUCT ION Model S B1025 9" x 42" Milling Mac hine w/ Power F eed Product Dimensions: Weight .........................................................................
-10 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 I NT RODUCTION Operation Information (continued) Distance Range Spindle to Column .............................................................................................. ..
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -1 1- I N TRODUCT ION Model S B1026 9" x 42" Milling Mac hine w/ Power F eed Product Dimensions: Weight .......................................................................
-1 2 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 I NT RODUCTION Operation Information (continued) Distance Range Spindle to Column .............................................................................................. .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -1 3 - S AFE TY Underst anding Risks of Mac hiner y Operating all machinery and machining equipment can be dangerous or relatively saf.
-14 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 S AFE TY 5. Entanglement: Loose clothing, gloves, neckties, jewelry or long hair may get caught in moving parts, causing entanglement, amputation, crushing, or strangulation. Reduce this risk by removing/securing these items so they cannot contact moving parts.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -1 5 - S AFE TY Additional Milling Mac hine Safety 6. Stopping Spindle: To reduce the risk of hand injuries or entanglement hazards, DO NOT attempt to stop the spindle with your hand or a tool.
-16 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 PREP A R A T I ON Preparation Over view T hings Y ou'll Need During the setup process, operation, and maintenance of the ma.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -17- PREP A RA T IO N Unpac king This item was carefully packaged to prevent damage during transport. If you discover any damage, please immediately call Customer Service at (360) 734-1540 for advice.
-1 8 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 PREP A R A T I ON The unpainted surfaces are coated at the factory with a heavy-duty rust preventative that prevents corrosion during shipment and storage. The benefit of this rust preventative is that it works very well.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -1 9 - PREP A RA T IO N = P ower connection 66" 36" 24" 38" 81 1 ⁄ 2 " 23" 30" W all W all 30" Figure 5. Space required for full range of movement.
-2 0 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 PREP A R A T I ON L ifting & Moving This machine and it s par ts are he avy ! Serious personal injur y may occur if safe moving methods are not used . T o re duce the risk of a lif ting or dropping injur y , ask other s for help and use power equipment .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -21 - PREP A RA T IO N Bolting to Concrete Floors Figure 8. Common types of fasteners for bolting machinery to concrete floors. Leveling & Mounting Leveling Figure 7 . Example of a precision level.
-22 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 PREP A R A T I ON Assembly Ball Handles The ball handles for either end of the X-axis leadscrew have spring-loaded, keyed center bushings, as shown in Figure 9 . This allows them to disengage from the leadscrew when using the power feed, avoiding an entanglement hazard.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -2 3 - PREP A RA T IO N W ay Covers 1. Remove the five button-head cap screws shown in Figure 11 from the front of the saddle and knee, position the pleated way cover in place, then secure it with the removed cap screws.
-2 4 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 PREP A R A T I ON Power Connection S B1025 (220V 3- Phase) Full Load Amp Draw ........................... 6/5.6 Amps Required Voltage Range ................................ 220V Phase .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -2 5 - PREP A RA T IO N T est Run After all preparation steps have been completed, the machine and its safety features must be tested to ensure correct operation.
-2 6 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 PREP A R A T I ON 8. Listen for abnormal noises and watch for unexpected actions from the mill. The machine should run smoothly and without excessive vibration or rubbing noises.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -27- PREP A RA T IO N Inspections & Adjustments The following list of adjustments were performed at the factory before the machine was shipped: s Gib Adjustment .................
-2 8 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION Operation Over view The purpose of this overview is to give an example of a typical milling operation.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -2 9 - OP E RA TION Control Panel Use Figures 15–16 and the following descriptions to understand the functions of the mill control panel. ON Button: Allows power flow to the motor. The spindle direction switch must be used to start the spindle rotation.
-30- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION Graduated Inde x Rings The table ball handles and elevation crank have graduated index rings attached (see Figure 1.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -3 1 - OP E RA TION X-Axis Power F eed The mill is equipped with a power feed unit for X-axis table movement. Refer to the illustration in Figure 20 and the descriptions below to understand the functions of the various components of the power feed system.
-3 2- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION Head Movement The head tilts 45° back and forth, and rotates 90° left and right, as shown in Figures 21–22 . Figure 22. Head tilts 90° left-and-right. 90° Figure 21.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -33- OP E RA TION Rot ating Head 1. DISCONNECT MILL FROM POWER! 2. Loosen the four rotation lock bolts on the face of the head shown in Figure 24 . 3. Use one hand to apply pressure to the head in the direction of tilt, then slowly turn the rotation bolt.
-34- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION T ools Needed Qty Dial Test Indicator (with at least 0.0005" resolution) .................. 1 Indicator Holder (mounted on the quill/spindle) ...................
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -35- OP E RA TION Note: Generally, the goal in the next steps is to get the difference of the indicator readings between the end of the parallel bar down to 0.0005". However, the acceptable variance will depend on the requirements for your operation.
-36- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION Rot ating Ram 1. DISCONNECT MILL FROM POWER! 2. Loosen the four lock bolts on top of the turret (see Figure 30 ). Note: There are two lock bolts on either side of the ram.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -3 7 - OP E RA TION Setting Spindle Speed Setting Spindle Speed Range Setting the spindle speed range involves engaging and disengaging a spindle spline that uses gearing to increase or decrease the range of spindle speeds.
-38- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION 3. Press the spindle speed range lever shown in Figure 32 toward the head to release the detent pin from the detent plate, move selector so that the pin is over the other detent, then release the selector.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -39- OP E RA TION Setting S B1025/SB1026 Spindle Speed Range 1. Make sure that the spindle rotation is turned OFF and the spindle is at a complete stop. 2. Use the charts below to find the spindle speed range that includes the required spindle speed for your operation.
-4 0- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION 5. Move the high/low range lever back to the right side of the head (see Figure 33 . Note: Make sure that the range lever is as far back as it will go before starting the spindle rotation.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -4 1 - OP E RA TION Setting Spindle Speed The Model SB1024 uses a variable pulley system to set infinite speeds within the speed range selected. The Model SB1025/SB1026 requires re-positioning the V-belt on the pulleys to change spindle speed.
-4 2- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION Setting S B1025/SB1026 Spindle Speed 1. DISCONNECT MILL FROM POWER! 2. Remove the belt housing side covers on both sides of the head to expose the V-belt and pulleys, as shown in Figure 35 .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -4 3- OP E RA TION Figure 37 . Model S B1026 V-belt positions and speeds. Motor Spindle SB1026 Low Spindle Speed Range 80 140 220 325 SB1026 High Spindle Speed Range Motor Spindle 710 1170 1860 2800 5.
-44- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION Figure 39. Downfeed selector positions. Manual (Disengaged) P osition Auto-D ownfeed (E ngaged) P osition 4. Make sure the pin of the coarse downfeed handle hub is engaged with one of the detents on the downfeed sleeve (see Figure 40 ).
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -4 5- OP E RA TION Fine Downfeed Controls There are a number of devices on the head that are used with the fine downfeed handwheel or the auto-downfeed system. Refer to Figure 41 and the descriptions below to become familiar with these controls.
-4 6- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION Using the Auto- Downfeed System When using the auto-downfeed system, the spindle will move in the direction you choose with the auto-downfeed direction pin. When the quill dog reaches the top or meets the downfeed stop, the downfeed clutch lever will release.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -4 7 - OP E RA TION 7. Select one of the three downfeed rates by pulling the knob of the auto-downfeed rate selector out, position the selector over the appropriate detent, then release the knob.
-48- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 OP E RA T ION Loading/ Unloading T ooling The mill is equipped with an R8 spindle taper and a 7 ⁄ 16 "-20 x 18 1 ⁄ 2 " spindle drawbar that includes one spacer for tool attachment flexibility (see Figure 46 ).
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -4 9- MAI NTE NAN C E Maintenance Sc hedule Each operator of this machine is responsible for ensuring proper care of the equipment. We strongly recommend that all operators make a habit of following the daily maintenance procedures.
-5 0 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 MAI NTE NAN C E Use this chart to keep track of the maintenance performed on the mill. Cross out or initial the “Day” box for each item on the list. If the box is blacked out, mainte- nance is not required for that item on that day.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -5 1 - MAI NTE NAN C E L ubrication The mill has numerous moving metal-to- metal contacts that require regular and proper lubrication to ensure efficient and long-lasting operation, and to protect your investment.
-5 2- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 MAI NTE NAN C E Quill Oil Type ...... Mobil Vactra 2 or ISO 68 Equivalent Oil Amount .......................................... Fill Oil Cup Check/Add Frequency .............. 4 hrs.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -5 3- MAI NTE NAN C E Speed Range Bearing Sleeve (S B1024 Only) Oil Type ...... Mobil Vactra 2 or ISO 68 Equivalent Oil Amount .......................................... Fill Oil Cup Check/Add Frequency .
-54- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 MAI NTE NAN C E Ram W ays Oil Type ...... Mobil Vactra 2 or ISO 68 Equivalent Oil Amount ............................................. Thin Coat Check/Add Frequency ............ 40 hrs.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -5 5- MAI NTE NAN C E 2. Remove the hex nut and ball handle from the power unit end of the longitudinal leadscrew (see Figure 57 ). 3. Unthread and remove the knurled retaining ring and graduated dial ring from the end of the leadscrew.
-5 6 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 MAI NTE NAN C E The cavity in the base of the mill can be used as a coolant reservoir if you choose to install a recirculating coolant pump accessory. This reservoir also catches any coolant and debris that falls from the table and through the screens in the base.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -5 7 - MAI NTE NAN C E Mac hine Storage To avoid rust problems or corrosion damage, use the following information to protect your investment when storing the mill for any length of time.
-5 8 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 S E RVI C E Adjusting Gibs Gibs are tapered lengths of metal that are sandwiched between two moving surfaces. Gibs control the gap between these surfaces and how they slide past one another.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -5 9- S E RVI C E Adjusting Leadscrew Bac klash Leadscrew backlash is the amount of motion the leadscrew rotates before the attached device begins to move.
-60- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 S E RVI C E Figure 65. Ball handle, rings, and key removed from the cross leadscrew . Cross Leadscrew 4. Remove the four cap screws from the bearing housing, then slide it off the leadscrew (see Figure 66 ).
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -6 1 - T ROU B LESHOO T I NG If you need replacement parts, or if you are unsure how to do any of the solutions given here, feel free to call us at (360) 734-1540. Symptom Possible Cause Possible Solution Machine does not start or a breaker trips.
-6 2- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 TROUB LESHOO TING Symptom Possible Cause Possible Solution Tool slips in collect. 1. Collet is not fully drawn into spindle taper. 1. Snug up the drawbar to fully seat the collet.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -6 3- E LECT R ICAL Electrical Safety Instructions These pages are accurate at the time of printing. In the constant effort to improve, however, we may make changes to the electrical systems of future machines.
-6 4- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 E LECTRICAL W iring Over view The photos and diagrams included in this section are best viewed in color .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -6 5- E LECT R ICAL CONT ACT OR Allen Bradley C16 01 TRA NSFO RMER Y ung-Jeng A009-03 83 A1 A2 135 2 1 L1 L2 L3 NC CONT ACT OR Allen B.
-6 6- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 E LECTRICAL Ground W V U Hot Hot Ground 6-20 Plug (As Recommended) 220 VAC G X1 X2 1 2 1 2 X1 X2 3 4 3 4 3 4 T1 T1 T1 T1 10 10 8.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -6 7 - E LECT R ICAL Figure 68. Electrical b ox. Figure 69. W ork lamp. Figure 7 0. Motor junction b o x.
-6 8- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 E LECTRICAL TRA NSFO RMER Y ung-Jeng A009-03 83 0V 23 0V 380V 415V 46 0V 110V 24V 12V 0V E CONT ACT OR Allen Bradley C09 400 A1 .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -6 9- E LECT R ICAL Ground Hot Hot Ground 6-20 Plug (As Recommended) Spindle Direction/Speed Switch (Both Sides Shown) Power Indicator.
-70 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 E LECTRICAL Figure 72. SB1025 Electrical box. Figure 73. SB1025 W ork lamp. Figure 7 4. S B1025 Motor junction b o x. S B1025 Electrical Component Pictures Figure 75. SB1025 Control panel.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -71- P ARTS Headstoc k 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 .
-72 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS Headstoc k Par ts L ist REF P A RT # DES CRI PT ION REF P A RT # DES CRI PT ION 1 PSB10240449 ROUND KNOB 3/8-16 5 0 PSB10.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -73 - P ARTS Headstoc k Par ts L ist REF P A RT # DES CRI PT ION REF P A RT # DES CRI PT ION 9 7 PSB1024009 7 KNURLED KNOB SCREW M6-1 .
-7 4 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS Quill 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 205 Quill Housing 206A REF P A RT # DES CR.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -75 - P ARTS S B1024 Gearb o x 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 321 322 323 324 325 326 327 328.
-76 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS S B1024 Gearb o x Par ts L ist REF P A RT # DE SCR IPT IO N REF P A RT # DE SCR IPT IO N 301 PSB10240301 GE A RBOX PL A TE 32 5 PSB1024032 5 BELT PULLEY GE A R 302 PK 7 0M KEY 8 X 8 X 12 326 PC A P24M C A P SCREW M 5 -.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -7 7- P ARTS S B1025/S B1026 Gearb o x F or Reference Only F or Reference Only 301 302 303 304 305 306 307 308 309 310 311 312 313 314.
-78 - F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS S B1025/S B1026 Gearb o x Par ts L ist REF P A RT # DE SC RIP TI ON REF P A RT # D ESC RI PTI ON 301 PN04 HEX NUT 5 /8-11 318 PSS02M SET SCREW M6-1 X 6 302 PFH0 7 MF L A T HD SCR M 5 -.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -79 - P ARTS S B1024 Belt Housing F or Reference Only 401 402 403 403-1 403-2 403-3 403-4 403-5 404 405 406 407 408 409 410 411 412 41.
-80- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS S B1024 Belt Housing Par ts L ist REF P A RT # DESC RI PTI ON REF P A RT # DES CRI PTI ON 401 PC A P14 C A P SCREW 3/8-16 .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -8 1 - P ARTS S B1025/S B1026 Belt Housing SB1026 Only 401 401-1 401-2 401-3 402 403 404 405 406 407 408 409 410 411 412 413 414 415 4.
-8 2- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS S B1025/S B1026 Belt Housing Par ts L ist REF P A RT # D ES CRI PTI ON REF P A RT # DES CR IPT ION 401 PSB102 5 0401 MOTO.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -83- P ARTS Ram 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 530A 5.
-84- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS Ram Par ts L ist REF P A RT # DESC RI PTI ON REF P A RT # DES CRI PT ION 5 01 PC A P31M C A P SCREW M8-1.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -85- P ARTS Column, K nee, & Saddle 601 602 603 604 605 606 607 608 609 610 613A 615 616 617 618 619 620 621 622 623 624 625 626* .
-86- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS Column, K nee, & Saddle Par ts L ist REF P A RT # DES CRI PT ION REF P A RT # DES CRI PT ION 601 PSB10240601 COLUMN 63.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -8 7 - P ARTS T able 701 702 703 704 705 706 707 708 709 710 711 712 713 714‡ 715 716 717 718 719 720 721 722 723 724 725 729 730 73.
-88- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS T able Par ts L ist REF P A RT # DES CRI PT ION REF P A RT # DES CRI PT ION 7 01 PN01 HEX NUT 1/2-20 7 23 A PSB10240 7 23 .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -89- P ARTS 801 802 803 804 805 806 807 808 Oil distributor A B C D E F G H 801 A B C D E F G H K 801 K One- Shot Oiler REF P A RT # D.
-90- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS S B1024/S B1026 Electrical Bo x & Control Panel REF P A RT # DES CRI PT ION REF P A RT # DES CRI PT ION 901 PSB1024090.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -9 1 - P ARTS S B1025 Electrical Bo x & Control Panel Electrical Box Control P anel 901 902 903 904 905 906 907 908 909 910 911 91.
-92- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS Accessories 1001 1002 1003 1004 1005 1006 1007 REF P A RT # DES CRI PT ION REF P A RT # DES CRI PT ION 1001 PWR1921C CLOSE.
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -93- P ARTS S B1024 Head Mac hine L abels The safety labe ls provided with your machine are use d to make the operator aware of the machine hazards and way s to prevent injury. Th e owner of this machine MUST maintain the original location and r eadability of these safet y labels .
-94- F or Machines Mfg . Since 8 / 0 9 SB 1 0 24 / SB 1 02 5 / SB 1026 P ARTS S B1024 Main Mac hine L abels REF P A RT # DES CRI PT ION REF P A RT # DES CRI PT ION 110 7 PSBL A BEL08VL ENT A NGLEMENT H A Z A RD L A BEL 111 7 PSB1024111 7 220V 1PH L A BEL 1108 SB1319 SOUTH BEND N A MEPL A TE 90MM 1118 PSB10241118 110V 1PH 5 .
F or Machines Mfg. S i nce 8 / 09 SB 1 024 / SB 1 02 5 / SB 1 026 -95- P ARTS S B1025/S B1026 Mac hine L abels REF P A RT # DES CRI PT ION REF P A RT # DES CRI PT ION 1101 PSB102 5 1101 M A CHINE ID L A BEL (SB102 5 ) 111 5 PSB1024111 5 POWER FEED NOTICE L A BEL 1101 PSB10261101 M A CHINE ID L A BEL (SB1026) 1118 PSB10241118 110V 1PH 5 .
.
W AR R ANT Y This quality product is warranted by South Bend Lathe Company to the original buyer for one year from the date of purchase. This warranty does not apply to consumable parts, or defects due to any kind of misuse, abuse, negligence, accidents, repairs, alterations or lack of maintenance.
South Bend L athe Co. P .O. Box 2027 Bellingham, W A 98227 P H O N E: (3 6 0) 734-15 40 (Administrative Offi ces) F A X: (36 0) 67 6-10 75 (International) F A X: (36 0) 734-163 9 (U SA only) southbendla the .
An important point after buying a device South bend SOUTH BEND LATHE CO.. SB1024 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought South bend SOUTH BEND LATHE CO.. SB1024 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data South bend SOUTH BEND LATHE CO.. SB1024 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, South bend SOUTH BEND LATHE CO.. SB1024 you will learn all the available features of the product, as well as information on its operation. The information that you get South bend SOUTH BEND LATHE CO.. SB1024 will certainly help you make a decision on the purchase.
If you already are a holder of South bend SOUTH BEND LATHE CO.. SB1024, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime South bend SOUTH BEND LATHE CO.. SB1024.
However, one of the most important roles played by the user manual is to help in solving problems with South bend SOUTH BEND LATHE CO.. SB1024. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device South bend SOUTH BEND LATHE CO.. SB1024 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
