Instruction/ maintenance manual of the product 6900D Makita
Go to page of 16
n Capacities Bolt size Square drive Standard bolt High tensile bolt I - Impacts per minute At high speed At low speed 12.7 mm (1/2") MODEL 6900D 12.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
I 14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
ADDITIONAL SAFETY RULES I FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anythiqg to cover or clog the charger vents.
Installing or removing battery cartridge Always switch off the tool before insertion To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
e When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it completely a couple of times.
Reversing switch and speed change switch action Slide the reversing switch to the right for clockwise rotation or to the left for counterclockwise. Slide the speed change switch to the right for high speed (high tightening torque) or to the left for low speed (low tightening torque).
Operation The proper tightening torque may differ depending upon the kind or size of the bolt. The relation between tightening torque and tightening time is shown in the figures below.
Speed Type of bolt Tightening time High High tensile bolt M10 13/8") 3 seconds Low Standard bolt M8 (5/16") 1 second CAUTION : If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery.
.. : . .. ,.. ... . ..... i:: !,?>. . .. . . . .. , . . .... .. . .. . . , . . ... .. ... . .. .., .. . . .... . . :. :. ,.,.. . +:;.,I. ii ;; . MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.
ACCESSOR I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended mannuer.
... : , . . . . ,. . .. . .. . :.i:.. h:; . .. .. !.? : ' ... f.. ... .. . .. .. ,:: ..:. .. ._._ ... .. . ... ; , 1'. 8, 1 .. .. 'I .;:.$,: . . ,,., ... , , 784208- 1 Phillips bit (Use with bit adapter) 45 (1-3/4") Bit adapter Part No.
Juna-Ol-'BB US 12.7 mm (1/2") @-- CORDLESS IMPACT WRENCH Model 6900D Note: The switch and other part configurations may differ from country to country.
MODEL 69000 $$D DESCRIPTION ';"OM $&, DESCRIPTION June-03-'88 US MACHINE - 1 2 3 4 5 6 7 0 9 10 11 12 13 I4 15 16 17 18 19 - I 1 1 1 1 1 1 I 1 1 1 I 1 I 1 1 1 I 1 - Pan Head Screw M3x14 lWilh Washer1 Switch Pan Head Screw M3.14 lWith Washer1 Compression Spring 2 Hausmp S.
I MAKmA LIMITED ONE YEAR WARRANTY Warranty Policy Fvery Makita tool is thorou ly inspected and tested before leaving the factory. It is warranted to be free of defects from workanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 6900D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6900D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6900D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6900D you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6900D will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6900D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6900D.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6900D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6900D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
