Instruction/ maintenance manual of the product 9629 Sound Performance Lab
Go to page of 9
Model 9629 Manual Dual-channel De-Esser.
2 Manual A uto D ynamic De-Esser Modell 9629 V ersion 4.0 – 5/2000 R & D: W olfgang Neumann Written b y Hermann Gier & P aul White The information in this document has been carefully v erified and is assumed to be correct.
3 Co n t e n t s F oreword ............................................................................................................................. 3 Thanks .........................................................................................
4 Introduction The Aut o-D ynamic De-Esser is a highly specialized audio tool. I t is used to reduce S-frequency of speakers and singers. It should per form without disturbing natural character and timbre of the voice.
5 C onnections Switch off pow er of all units to be connected before y ou connect the Auto D ynamic De-Esser . The Aut o D ynamic De-Esser is fitted with both XLR-connec tors and TRS stereo jacks for balanced oper ation, though the jacks may be used with unbalanced connections simply by plugging in mono jack-plugs.
S-Reduction controls the intensity of the de-essing effec t. The LED-display shows the gain reduction of S-frequencies in a range between 0dB to -20dB in 2dB steps. S-REDUCTION adjustments between 3 and 7 hav e prov en to create best results in practical applications.
7 C ontr ol Elements P o w er Supply The Male/F emale-switch lets you select two different oper ation modes: The female mode is chosen when the switch is pressed and the status-LED illu- minates. The automatic S-frequency recognition is set to the charac teristics of female voic es.
8 Specifications Input & Output Instrumentation amplifier , elec tronically balanced (differ ential), transformerless Nominal input level.......................................... +6 dB Input impedance .............................................
9 SPL electronics GmbH (hereaf ter called SPL) products are warranted only in the countr y where purchased, through the authorized SPL distributor in that country , against defects in material or workmanship .
An important point after buying a device Sound Performance Lab 9629 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sound Performance Lab 9629 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sound Performance Lab 9629 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sound Performance Lab 9629 you will learn all the available features of the product, as well as information on its operation. The information that you get Sound Performance Lab 9629 will certainly help you make a decision on the purchase.
If you already are a holder of Sound Performance Lab 9629, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sound Performance Lab 9629.
However, one of the most important roles played by the user manual is to help in solving problems with Sound Performance Lab 9629. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sound Performance Lab 9629 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
