Instruction/ maintenance manual of the product Torque Wrench Bahco
Go to page of 4
To r que Angle Gauge Automotive manufacturers prescribe both torque and rotational angle settings for fastening elements used in vehicles. Angle controlled torquing gives initially “snug” torque, then turns the fastener a step further to the optimum torquing angle.
Art. Code EAN-Code Graduation Drive Length 731415+ Capacity Scale Handle mm 7451-20 1845452 1 2-20 Nm 1 Nm 0.1 Nm 3/8" 355 900 7451-100 1845469 1 10-100 Nm 5 Nm 0.
Art. Code EAN-Code Graduation Drive Length 731415+ Capacity Scale Handle mm 7451-20 1845452 1 2-20 Nm 1 Nm 0.1 Nm 3/8" 355 900 7451-100 1845469 1 10-100 Nm 5 Nm 0.
To r que Angle Gauge Automotive manufacturers prescribe both torque and rotational angle settings for fastening elements used in vehicles. Angle controlled torquing gives initially “snug” torque, then turns the fastener a step further to the optimum torquing angle.
An important point after buying a device Bahco Torque Wrench (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bahco Torque Wrench yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bahco Torque Wrench - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bahco Torque Wrench you will learn all the available features of the product, as well as information on its operation. The information that you get Bahco Torque Wrench will certainly help you make a decision on the purchase.
If you already are a holder of Bahco Torque Wrench, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bahco Torque Wrench.
However, one of the most important roles played by the user manual is to help in solving problems with Bahco Torque Wrench. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bahco Torque Wrench along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
