Instruction/ maintenance manual of the product M3LDY B&B Electronics
Go to page of 6
M3LDY EM-2664 Rev.2 P. 1 / 6 BEFORE USE .... Thank you for choosing M-System. Before use, check the package you received as below. If you have any problems or questions with the product, please contact M-System’s Sales Office or representatives. ■ PACKAGE INCLUDES: Signal conditioner .
M3LDY EM-2664 Rev.2 P. 2 / 6 ■ HOW TO SEPARATE THE TERMINAL BLOCKS When you need to separate the terminal blocks from the transmitter body for wiring, insert a minus driver between the terminal block and the housing body, pull up the driver and pull out the terminal block.
M3LDY EM-2664 Rev.2 P. 3 / 6 EXTERNAL & INTERNAL VIEWS 87654321 ON OFF ON OFF 4321 Configuration DIP SW 10 11 12 789 456 123 Configurator Jack DOWN Button UP Button MODE Button LED3 (LD3) LED2 (LD.
M3LDY EM-2664 Rev.2 P. 4 / 6 CHECKING 1) Terminal wiring: Check that all cables are correctly connected according to the connection diagram. 2) DIP SW setting: Check that the switches are set to appropriate positions. 3) Power input voltage: Check voltage across the terminal 11 – 12 with a multimeter.
M3LDY EM-2664 Rev.2 P. 5 / 6 ■ PREPARATION (e.g. M3LDY-R/A) 1) Mount the DIP-SW-configured M3LDY on to a DIN rail. 2) Connect the M3LDY to a simulator and a multimeter and to a DC power source as shown to the right. 3) Turn the power supply on and wait for 10 minutes.
M3LDY EM-2664 Rev.2 P. 6 / 6 ST A TUS INDICA TOR LED Combinations of the three front LEDs (LD1, LD2, LD3) indicate the transmitter’s operating status by different flash- ing patterns.
An important point after buying a device B&B Electronics M3LDY (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought B&B Electronics M3LDY yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data B&B Electronics M3LDY - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, B&B Electronics M3LDY you will learn all the available features of the product, as well as information on its operation. The information that you get B&B Electronics M3LDY will certainly help you make a decision on the purchase.
If you already are a holder of B&B Electronics M3LDY, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime B&B Electronics M3LDY.
However, one of the most important roles played by the user manual is to help in solving problems with B&B Electronics M3LDY. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device B&B Electronics M3LDY along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
