Instruction/ maintenance manual of the product DP-660 B&B Electronics
Go to page of 6
DP-660 Industrial Power Supply User ’ s Manual Introductions .................................................................................................................. 1 1.0 Input Specifications ..............................................
Introductions The DP-660 is a dual output, DIN-Rail mounted, 65 watts switching power supply . It has over voltage protection in main output and over load latch of f mode protection on all output. 1.0 Input S pecifications 1.1 Input voltage The range of input voltage is from 85V AC to 270V AC 1.
rated load and +/- 10% of input voltage changing. 2.4 Load regulation The load regulation for +24V is less then +/-1%, for +5V is less then +/-5%, measuring is done by changing the measured output load +/-40% from 60% rated load, and keep other output at 60% rated load.
5.0 International st andards The following data is by open frame testing (Board only). Internal PCB model No.: SNP-9069 5.1 Safety standards Designed to meet the following standards: UL 1950 D3 CSA 22.2 No. 234 VDE EN 60 950 5.2 EMI standards Designed to meet the following conducted limits.
6.0 Mechanical S pecification Dimensions: 44mm (W)x 150mm(H)x 122m m(D) 6.1 D P-660 4.
6.1 Din-Rail mounting The DP-660 can be direct install to 35mm DIN-Rail. 6.2 Connectors 6.2.1 AC inputs connector : Pitch 5.08mm screw term inal block W ire range : 12A WG~22A WG / 2.5mm ² Pin Assignments: N o connection Frame Ground AC Input N L N.C.
An important point after buying a device B&B Electronics DP-660 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought B&B Electronics DP-660 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data B&B Electronics DP-660 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, B&B Electronics DP-660 you will learn all the available features of the product, as well as information on its operation. The information that you get B&B Electronics DP-660 will certainly help you make a decision on the purchase.
If you already are a holder of B&B Electronics DP-660, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime B&B Electronics DP-660.
However, one of the most important roles played by the user manual is to help in solving problems with B&B Electronics DP-660. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device B&B Electronics DP-660 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
