Instruction/ maintenance manual of the product TX 2 Aztech Systems
Go to page of 14
- 1 - Version 1-2000 Novemb er 2000 OPERATION AND MA INTENANCE MANU A L FOR TX 2, 4, 8, 16, 32 LOW PROFILE HYDRAUL IC TORQUE WRENCHES Series TX-2, T X-4, T X-8, TX-16 and TX- 32 Low Prof ile Hydraulic.
- 2 - FAILURE TO OBS ERVE THE FOLLOWING W ARNINGS COULD RESULT IN INJ URY USING TH E TOOL • Keep hands, lo ose clot hing and long hair aw ay fro m the re action a rm and w orking area during operatio n. Do no t attempt to support the t ool wit h your ha nds during o peration.
- 3 - PLACING THE TOOL IN SERVICE ADJUSTMENTS SETTING THE TORQUE After deter mining the desir ed torq ue, use the torque c on- version chart on the Shro ud or the tor que conversio n charts on page s 5 and 6 to deter mine the pressure that is necessar y to achieve that torque.
- 4 - TX Series T orque Con version Chart Bar/N.M. TX-2 TX-4 TX-8 TX-16 TX-32 Hex 3/4" to 1-13/1 6" 1-7/8" to 2 -3/8" All Hex Sizes All Hex Sizes 2-5/8" to 3 -15/16" 4&qu.
- 5 - TX Series Torque Conversion Chart P.S.I./FT./lbs TX-2 TX-4 TX-8 T X-16 TX-32 Hex 3/4" to 1-13/1 6" 1-7/8" to 2 -3/8" All Hex Sizes All Hex Sizes 2-5/8" to 3 -15/16".
- 6 - TX - 16, TX - 32 SERIES LINK TX - 2, TX - 4, TX - 8 SERIES LINK.
- 7 - Part Numbers for Ordering (LINKS) Part TX2 TX4 T X8 TX16 TX32 1 SIDE PL A TE - L TX-2- L01 TX-4- L01 TX-8- L01 TX-16- L01 TX-32- L01 2 SIDE PL A TE - R TX-2- L02 TX-4- L02 TX-8- L02 TX-16- L02 T.
- 8 - TX - 2, TX - 4, TX - 8 SERIES CYLINDER TX - 16, TX - 32 SERIES CYLINDER.
- 9 - Part Numbers for Ordering (CYLIND ERS) Part TX2 T X4 TX8 TX16 TX32 1 HOUSING TX-2-C01 TX-4-C01 TX-8-C01 TX-1 6-C01 TX-32-C01 PISTON ROD A SSEM BLY TX-2 -C03 TX-4-C03 TX-8-C03 TX-16 -C03 TX-32-C0.
- 10 - Maintenance Section Alway s turn off t he powe r supply, bleed off hydraulic fluid fro m the hose co nnections on the cy linder assembly and disconnect t he hoses before a ttempting to repa ir or perfor m maintenance on this to ol. Alway s wear eye pr otectio n when opera ting or perfor ming maintenance on t his tool.
- 11 - unscrew and r emove the pisto n head fro m the sha ft with the Pisto n O-ring (1 7). 7. Pull the Piston shaft out o f the Housing. 8. If the Sliders ( 5) must be re placed, position the Slider Pin (14 ) over a clear ance opening in a soft bloc k and use a small dr ift to tap the Pin out of the Sliders and shaft.
- 12 - 7. Wipe a thin film of Marine G rade Moly Lube onto t he inner race of t he large op ening in the Dri ve Plate. 8. Position the Ratc het (6) in the central o pening of the Drive Plate. 9. Insert the Dri ve Segment (7 ) into the op ening adja cent to the Ratchet.
- 13 - the outer edge o f both Slid ers or d eep enough to prevent the sha ft ends from dragging o n the Hous ing walls. 6. Install the Pisto n O-ring (1 7) in the inter nal groove of the Seal Ring ( 5). 7. Install the asse mbled Seal Ring and P iston O-rin g on the hub at the lar ge end o f the P iston Rod.
- 14 - Troubleshootin g Guide Trouble Probable Cause Solution Couplers are not securely at tached to the tool or pump Check the Coupler connections and m ake certain that they are connected.
An important point after buying a device Aztech Systems TX 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aztech Systems TX 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aztech Systems TX 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aztech Systems TX 2 you will learn all the available features of the product, as well as information on its operation. The information that you get Aztech Systems TX 2 will certainly help you make a decision on the purchase.
If you already are a holder of Aztech Systems TX 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aztech Systems TX 2.
However, one of the most important roles played by the user manual is to help in solving problems with Aztech Systems TX 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aztech Systems TX 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
