Instruction/ maintenance manual of the product AS 73 CS Smeg
Go to page of 20
Dryer Asciugatrice AS 73 CS.
2 - EN Read this manual prior to initial operation of the product! Dear Customer , We hope that your pr oduct, which has been manufactured in modern facilities and passed through a strict quality contr ol procedur e, will give you very good results.
3 - EN 1 Important safety information This section includes safety information that will help protection fr om risks of personal injuries or materialistic damages. Failure to follow these instructions shall cause any warranty and reliability commitment to become void.
4 - EN has a hinge against the hinge of the dryer . • Do not install or leave this product in places where it will be exposed to outdoor conditions. • Do not tamper with the controls.
5 - EN 2 Installation Refer to the nearest Authorised Service Agent for installation of your product. C Preparation of location and electrical installation for the product is under customer’ s r esponsibility . B Installation and electrical connections must be carried out by a qualified personnel.
6 - EN B The ventilation hose should not be connected to the chimney of a stove or a fireplace. B Do not operate your product at the same time with heaters such as a coal or gas stove.
7 - EN C The end of the hose should never be higher than the level of the water outlet on the machine. Otherwise, the “tank full” light of your machine will illuminate and stop the programme. C If the dryer is mounted on the washing machine by means of a bracket, use of the water drain hose is recommended.
8 - EN T ransportation of the machine 1. Unplug the machine from the mains. 2. Remove the water drain (if any) and chimney connections. 3. Drain water remained in the machine completely before transportation. Disposing of the old machine Dispose of your old machine in an environmentally friendly manner .
9 - EN 3 Initial pr eparations for drying Things to be done for ener gy saving: • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them.
10 - EN not be dried in the product since they emit flammable or explosive vapor . • Do not dry items cleaned with industrial chemicals in the dryer .
11 - EN Following weights are given as examples. Home articles Approximate weights (g) Cotton quit covers (double) 1500 Cotton quit covers (single) 1000 Bed sheets (double) 500 Bed sheets (single) 350.
12 - EN 4 Selecting a Pr ogramme and Operating Y our Machine Control panel 1 . Filter cleaning warning light W arning light tur ns on when the filter is full. 2. Program f ollow-up indicator Used to follow-up the progr ess of the current pr ogramme. 3.
13 - EN Preparing the machine 1. Plug in your machine. 2. Place the laundry in the machine. 3. Press the “On/Of f” button. C Pressing the “On/Of f” button does not necessarily mean that the programme has started. Press "Start/Pause/Cancel" button of the machine to start the programme.
14 - EN * : Energy Label standard pr ogram (EN 61121:2005) All values given in the table have been fixed according to EN 61121:2005 Standar d. These values may deviate from the table accor ding to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations.
15 - EN Auxiliary function Cancel audio warning Y our dryer will give an audio warning when the programme comes to an end. If you do not want to hear the audio warning, press “Cancel Audio W ar ning” button. The relevant light will turn on when this button is pressed and an audio warning will not be given when the programme comes to an end.
16 - EN Changing the programme after it has started Y ou can use this feature to dry your clothes under higher or lower temperatures after your dryer has started.
17 - EN EN 2 Height (adjustable) 85.0 cm Width 59.5 cm Depth 54 cm Capacity (max.) 7 kg Weight (net) 38 kg V oltage See type label Rated power input Model code T ype label is located behind the loading door .
18 - EN 3. Wipe the metal sensors with a soft cloth, dampened with vinegar and dry them. C Clean metal sensors 4 times a year . A Never use solvents, cleaning agents or similar substances when cleanin.
19 - EN For the condenser (products with a condenser) Hot and humid air in the condenser is cooled with the cold air from the r oom. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank. C Clean the condenser after every 15 drying cycles or once a month.
20 - EN Drying process takes too much time • Meshes of the filter may be clogged. W ash with water . Laundry come out wet at the end of drying. • Meshes of the filter may be clogged. W ash with water . • Excessive laundry might have been loaded in.
An important point after buying a device Smeg AS 73 CS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg AS 73 CS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg AS 73 CS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg AS 73 CS you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg AS 73 CS will certainly help you make a decision on the purchase.
If you already are a holder of Smeg AS 73 CS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg AS 73 CS.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg AS 73 CS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg AS 73 CS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
