Instruction/ maintenance manual of the product A2EA Smeg
Go to page of 32
Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE ________________ 4 2. INSTALLATION OF THE APPLIANCE _________________________ 6 3. ADAPTATION TO DIFFERENT TYPES OF GAS ________________ 9 4. FINAL OPERATIONS _____________________________________ 11 5.
Introduction 1. INSTRUCTIONS FOR SAFE AND PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APP LIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN A N ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANUAL AND ALL THE INSTR UCTIONS THEREIN BEFORE USING THE COOKER.
Introduction THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME IS POSITIONED VISIBLY IN THE STORAGE COMPARTMENT. THE PLATE MUST NOT BE REMOVED. DO NOT INSTALL THIS APPLIANCE ON A RAISED PLATFORM. DURING USE THE APPLIANCE BECOMES VERY HOT.
Instructions for the installer 6 2. INST ALLA TION OF THE APPLIANCE It is the law that all gas appliances are installed by competent persons . Corgi gas installers are approved to work to safe and satisfactory standards.
Instructions for the installer 7 For operation on 380-415V3N ∼ : use an H05RR-F-type five-core cable (5 x 1.5 mm 2 ). For operation on 380-415V2N ∼ : use an H05RR-F-type four-core cable (4 x 1.5 mm 2 ). For operation on 220-240V ∼ : use an H05RR-F-type three-core cable (3 x 2.
Instructions for the installer 8 2.3 Connecting to natural and LPG gas (Please see connection diagram) Make the connection to the appliance u sing flexible bayonet style hose in accordance to B.S. 669. The ho se connection at the rear of the appliance has a 1/2" BSP internal thread.
Instructions for the installer 9 3. AD APT A TION T O DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance wor k, detach the appliance from the electrical socket. The cooker hob is set for natural gas G20 (2H) at a pressure of 20 mbar.
Instructions for the installer 10 3.2 Burner and nozzle characteristics table Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1.05 50 30 360 76 75 Semi rapid 1.
Instructions for the installer 11 4. FINAL OPERA TIONS After replacing the nozzles, repositi on the flame-spre ader crowns, the burner caps and the grids. After adjustment to a different kind of gas from the one for which the cooker has been tested, replace the plate insi de the storage compartment with one corresponding to the new kin d of gas.
Instructions for the installer 12 4.4 Mounting the rear top upstand • Position the upstand abov e the top, taking care to align holes A with holes B .
Instructions for the user 13 5. DESCRIPTION OF CONTROLS 5.1 Front control panel All the cooker controls and co mmands are o n the front panel. Before using the main oven check that the electronic programmer is showing the symbol (see paragraph “ 5.2.
Instructions for the user 14 AUXILIARY OVEN THERMOSTAT KNOB Selection of cooking temper ature is carrie d out by turning the knob clockwise t o the required temperature, between 50° and 220°C. The tell-tale light comes on to indicate that the oven is warming up.
Instructions for the user 15 5.2 Electronic Programmer The programmer user instructions are vali d only for the main oven . LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END-OF-COOKING KEY DECREASE TIME KEY INCREASE TIME KEY 5.
Instructions for the user 16 5.2.2 Semiautomatic cooking Use this setting for automatic oven switch-off at the end of cooking time. By pressing key , the display lights up, showing ; keep the key pressed and at the same time, press keys o to set the cookin g time.
Instructions for the user 17 5.2.5 Adjusting alarm volume The acoustic alarm has three different settings. These can be operated, while the alarm is sounding, b y pressing key . 5.2.6 Switching off the alarm The alarm switches off auto matically after seven minutes.
Instructions for the user 18 6. USE OF THE COOKING HOB 6.1 Lighting of the cooking hob burners Before lighting the hob burn ers check that the flame caps are in the correct position and that th eir burner caps are in place, making s ure that the holes A in the flame caps correspon d to the spark plugs and thermocouples.
Instructions for the user 19 7. USE OF THE O VENS 7.1 Warnings and general advice Before using the oven for the first time, pre-heat it to maximum temperature (250°C) lo ng enough to burn any man ufacturing oily residues which could give the food a bad taste.
Instructions for the user 20 7.4 Storage compartment The storage drawer is at the bottom of the cooker, underneath the oven. For access, pull the bottom of the door. Never store inflammable materials such as rags, paper or the like. The compartment is intended only for holdin g the metal accessories of the range.
Instructions for the user 21 8. A V AILABLE ACCESSORIES The oven features 4 support positions for plates and racks of different height. Oven grill: for cooking food on plates, small cakes, roasts or food requiring light grillin g. Plate grill: for placing above plate for cooking foods that might drip.
Instructions for the user 22 9. COOKING HINTS In fan-assisted mode pr eheating shou ld be carried out at 30/40°C above the cooking temperature. Thi s cons iderably shortens cook ing times and reduces power consumpti on, as well as giving better cooking results.
Instructions for the user 23 9.2 Hot-air cooking (main oven) FUNCTION SWITCH THERMOSTAT SELECTOR SWITCH FROM 50° TO 250°C This system is suitable for cooking on sever al levels, including different types of food (fish, meat etc.), without the tastes and smells mingling.
Instructions for the user 24 9.4 Hot-air grilling (main oven) FUNCTION SWITCH THERMOSTAT SWITCH FROM 50° TO 200°C Ensures uniform heat distrib ution with greater heat p enetration into the food. Food will be lightly brow ned on the outside and remain soft inside.
Instructions for the user 25 9.6 Defrosting (main oven) FUNCTION SWITCH THERMOSTAT SWITCH IN POSITION 0 The flow of air produced by th e fan ensures quicker defrosti ng. The air circulating inside the o v en is at room temperature. The advantage of defrosting at room te mperature is that it does not alter the taste and appear ance of the food.
Instructions for the user 26 9.7 Recommended cooking table Cooking times, especially m eat, vary according to the thickness and quality of the food and to consumer taste.
Instructions for the user 27 HOT-AIR COOKING LEVEL FROM BELOW TEMPERATURE (°C) TIME IN MINUTES FIRST COURSES LASAGNE OVEN-BAKED PASTA CREOLE RICE 2 2 2 190 - 210 190 - 210 190 - 220 20 - 25 25 - 30 2.
Instructions for the user 28 10. CLEANING AND MAINTENANCE 10.1 Cleaning stainless steel Before performing any oper ations requiring access to powered p arts, switch off the power supply to the machine. To keep stainless steel i n good condition it shoul d be cleaned regular ly after use.
Instructions for the user 29 10.2.2 Burner caps, flame cap crow ns and burners To facilitate cleaning, caps, fl ame cap crowns, and burners are all removable. To remove the flame separatin g crown of the fish hob, loosen the two screws exposed aft er having removed the cap.
Instructions for the user 30 For easier cleaning, the storage dr awer underneath the oven c an be completely removed. Pull it right out and raise the front (as for an ordinary drawer) . 10.3.1 Assembling the self-c leaning liners 1. Remove all accessories from the oven; 2.
Instructions for the user 31 11. EXTRA ORDINAR Y MAINTENANCE Ovens periodically require small ma intenance interventions or replacement of parts subj ect to wear and tear such as ga skets, electric bulbs etc. Specific instructions for eac h intervention of this type appear below.
Instructions for the user 32 11.2 Removing the door Open the door completely and fit the pins (supplied) into the holes from the inside. Close the door to an angle of about 45°, lift it and remove it from its seat. To replace, fit the hi nges into the grooves pr ovided, then lower the door until it comes to rest and extract the pins.
.
914773043/ A.
An important point after buying a device Smeg A2EA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg A2EA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg A2EA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg A2EA you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg A2EA will certainly help you make a decision on the purchase.
If you already are a holder of Smeg A2EA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg A2EA.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg A2EA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg A2EA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
