Instruction/ maintenance manual of the product SMC EZ Connect SMCHT-ETH SMC Networks
Go to page of 21
.
Copyright • Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of pa tents or other rights of third parties which may result from its use.
2 Table of Content Chapter 1: Introduction ………………………………………………………………...3 Features and benefits………..…….…………………………………………3 Packaging Contents ...….…….….
3 CHAPTER 1 | Introduction Congratulations on your purcha se of an EZ Connec t™ 85Mbps Turbo Powerline to Ether net Desktop Adapter (SMCHT-ETH). SMC is proud to provide you with a powerful yet simple communication device for creating a Powerline network to extend the range of your wired or wireless network.
4 Panel Front On Receive Power Power LED Off Did not receive Power On Detect other HomePlug devices on the same powerline network HP LED Off Did not detect any other HomePlug devices on the same power.
5 Chapter 2: Installation Overview The installation of the SMCHT-ETH EZ Connect ™ 85Mbps Turbo Powerline to Ethernet Ad apter will only take minutes.
6 On this screen you will be asked to input the User Name and Org anization. It is n ot crucial to the device itself so enter as desired. The ‘ Install this application for ’ will work under the circumstances when multiple logins are desired.
7 This section allows a u ser to go ‘ Back ’ or ‘ Install ’ the utility. In case if the user wishes to change the previous options, cl ick ‘ Back ’ to go back to previous options and ch ange the settings. If not, continue and click the ‘ Install ’ button.
8 This screen shows that th e installat ion was completed succes sful ly. Click on ‘ Finish’ to exit the wizard. Now its time to setup your hardware conne ctions please r efer to the next diagram s. Hardware Setup 1. Plug your network cable into the computer’s RJ-45 network adapter port.
9 4. Plug the power plug of your power cable directly into a power outlet on the wall **Note: ** Do not plug the device into a UPS or power strip with surge protection. The HomePlug Turbo Ethernet Adap ter has its own power filter for protection against surges.
10 Chapter 3: Configuration Overview The HomePlug device uses 56-bit DES encryption to block outs ide access. The key is set by using the HomePlug Configuration Utility on the CD. By default, the protection is enabled. However, it is recommended that yo u change th e default network password.
11 of this seems to be correct, and you still do not see the device in the Device window, try rebooting your computer. If the problem sti ll persists, please cont act technical support ( Appendix G ). Part 2: Diagnose a Network HomePlug device The Main tab shows all the other HomePlug Un its on your powerline network.
12 Setting Up Security on a Local HomePlug device The Privacy tab will allow you to change the Network Password to the unit that is currently connected to this computer. This netw ork password encrypts all data that is sent from this unit using 56-bit data encryption standard (DES), thus creating a secure home network.
13 Setting Up Security on a Network HomePlug device The Privacy Tab will al low users to use one primary computer to contr ol the Network Password of all units on the home net work. First locate the DEK (Device Encryption Key) Ke y printed on the bottom of each device then enter this Key into the Device Password area on the Main Tab .
14 Appendix A: Troubleshooting Frequently Asked Questio ns Q. What’s the speed of Turbo HomePlug operat ing over a standard home p ower line network? A. Turbo HomePlug operates up to 85 M bp s ba ndwidth over a standard home power line network. Q. What’s the Estimated Range of HomePlug? A.
15 Q. I can’t connect to internet and other co mputers on my powerline network? A. 1. Check t o see if your IP address and TCP/ IP protocol are set up prope rly for all the computers on your power line network ( Appendix B ) and try to ping your gateway ( Appendix B ).
16 Appendix C: Glossary Default Password A password set by the manufacturer t h a t i s u n i q u e t o e a c h d e v i c e a n d i s u s e d t o g e n e r a t e a Default Encryption Key (DEK). The DEK is used o nly for the purpose of encrypting management commands that change the NEK so that the NEK is never sent in the clear over the powerline.
17 RJ-45 A connector similar to a telephone connector that holds up to eigh t wires used for connecting Ethernet devices. Router Protocol-dependent device that connects subnet works together.
18 Appendix D: Product Specification Below is an outline of the Technical Sp ecificat ions for the EZ Connect Powerline to Ethernet Desktop Adapter (SMCHT-ETH) Standards: HomePlug v1.
19 Appendix E – Complian ces FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide rea sonable protection against harm ful interference in a resident ial installation.
F OR TE CHNICAL SUPPORT , CALL: F r om U.S.A. and C anada (2 4 hours a da y , 7 da ys a w eek) (800) SMC -4- Y OU; Phn: (94 9) 6 7 9-8000; F ax: (94 9) 67 9-14 81 F r om Europe : C ontact det ails can be found on www .smc. com INTERNET E -mail addr ess: techsupport@smc.
An important point after buying a device SMC Networks SMC EZ Connect SMCHT-ETH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SMC Networks SMC EZ Connect SMCHT-ETH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SMC Networks SMC EZ Connect SMCHT-ETH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SMC Networks SMC EZ Connect SMCHT-ETH you will learn all the available features of the product, as well as information on its operation. The information that you get SMC Networks SMC EZ Connect SMCHT-ETH will certainly help you make a decision on the purchase.
If you already are a holder of SMC Networks SMC EZ Connect SMCHT-ETH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SMC Networks SMC EZ Connect SMCHT-ETH.
However, one of the most important roles played by the user manual is to help in solving problems with SMC Networks SMC EZ Connect SMCHT-ETH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SMC Networks SMC EZ Connect SMCHT-ETH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
