Instruction/ maintenance manual of the product CSW16X16S Smart-AVI
Go to page of 32
ww w .smar tavi.com Installation Manu al F or WUX GA, Component V ideo , Composite V ideo and S-V ideo with full stereo audio matrix switching Switch up t o 16 remote devices t o 16 remote displays located up to 1,000 f eet awa y .
2 ww w .smar tavi.com Introduction CA TS witch routes audio and video sig nals from several di erent video sourc es out to multiple displays (pr ojec tors, monit ors, etc.
3 ww w .smar tavi.com Ordering Informa tion T echnical Specications VIDEO Bandwidth 250MHz Input Signal Level 1 Volt pk pk in to 75R Output Impedance 100 Ohms Input Impedance 75 Ohms Connector RJ45.
4 ww w .smar tavi.com • Corpora te or Educational P resentations • F inancial (Remote Ser vers/User Con trol) • Call C enters for T echnical Suppor t • Industrial (Long-Range W ork.
5 ww w .smar tavi.com Installation Connecting XT A V transmitter Connecting The T ransmitter 1. Connect the output of the computer video card t o the video input of the transmitter using the included male to male video cable. 2. Connecttheoutputofthecomputeraudiocardt othe audio input of the transmitter using 3.
6 ww w .smar tavi.com Connecting X T W ALL T ransmitter Connecting The T ransmitter 1. Connect the output of the computer video card t o the video input of the transmitter using the included male to male video cable. 2. Connect the output of the computer audio card t o the audio input of the transmitter using 3.
7 ww w .smar tavi.com Installation (c ontinued) Connecting the XTPr o receiv er Connecting The R eceiver 1. Connect CA T5 cable (coming from the transmitter) t o the back of the receiver . 2. Connect 1-2 display monitors to the VGA out connectors on the fron t of the receiver .
8 ww w .smar tavi.com Introduction The XTPro family of products allows the extension of a wide range of video and audio formats, RS-232, and IR via a single Category 5 unshielded twisted pair (UTP) cable.
9 ww w .smar tavi.com Connecting the matrix Now you ar e ready to connect the CA TSwitch, Connect all the cat5 coming from the tr ansmitters to the inputs of the CA TSwitch Connect all the cat5 going .
10 ww w .smar tavi.com Installation (c ontinued) Smar tA VI Proprietar y Connector P air C olor RJ45 Pin Description 1 White/Orange 1 Video+A udio Orange 2 2 White/Green 3 Video+A udio Green 6 3 Blue .
11 ww w .smar tavi.com Sof tware Opera tion Advanced C onguration: If you have mor e than one Router installed you will want to check this bo x. Router T ype: Select “ CA TSWITCH ” A/V Split: Check this box if y ou need to route audio and video independently , regar dless from which source they origina ted from.
12 ww w .smar tavi.com Inputs/Outputs: Enter the number of Inputs/Outputs your CA TSWIT CH has. F or now we will assume that there are 16 inputs and 16 outputs. Com P or t: Select the appropriate com port that your computer is using to acc ess the router .
13 ww w .smar tavi.com The Main Routing Window enables y ou to control the rout er(s) connec tions by means of the CA TSWIT CH panel, the button panel, or with pr e -recorded rout es called macros. CA TSWIT CH Panel: This is pr obably the simplest way to route the connections.
14 ww w .smar tavi.com Macros: This section of the window is used to sav e and play back macros. Macros st ore a set sequence of routes . T o record a macr o: 1. Click on the Record button (last butt on shown above). A blinking “r ecording” message below this button will be displayed t o indicate that all routes are being r ecorded.
15 ww w .smar tavi.com Con trolling with IR Switching P or ts with Remote Contr ol Y ou have the option of con trolling the CA TSWITCH via Remote C ontrol.
16 ww w .smar tavi.com C ontrolling the CA T Switch with the SM T CP module The SM TCP -2 is an RS-232 contr ol module that allows most Smar tA VI switching matrixes t o be controlled r emotely via HT TP or TELNET . Manage the switching functions of your matrix with ease from an y where in the w or ld.
17 ww w .smar tavi.com COMPUTER IP ROUTER SMT CP-2 RS-232 SERIAL C AT 5 C AT 5 MA TRIX SWIT CH (NOT C ONNEC TED) C onnec ting to the SMT CP-2 f or the rst time The rst time you c onnec t the SMT CP-2, y ou will need to per form the follo wing steps to set the initial conguration.
18 ww w .smar tavi.com F or the initial setup , click the Net work Setting button and manually assign an IP address t o the SMT CP-2. This will assure that the SMT CP -2 will always hav e the same IP address.
19 ww w .smar tavi.com C ontrolling the SM T CP-2 via HTTP Matrix Menu The matrix menu allow s you to set the crosspoints f or the matrix. Crosspoints ar e used to route sig nals from the individual inputs to individual outputs. The output channels can only hav e one input, but each input can have sever al outputs.
20 ww w .smar tavi.com Network Setting Menu The network setting menu allows y ou to assign a static IP address to the SM T CP-2. It is recommended that you statically assig n an IP address to av oid any future conict or connectivit y issues with DHCP .
21 ww w .smar tavi.com SMT CP -2 Fr ont SMT CP -2 Rear User Administr ation Menu C ontrolling the SMT CP -2 via TELNET Commands ma y be sent transparently to the ma tr ix via a TELNET connection to the SMT CP-2. T o use this function, use a telnet client such as Hyper terminal or Pu T T Y to connec t to the IP address of the SM TCP -2.
22 ww w .smar tavi.com COMPUTER IP ROUTER SMT CP-2 RS-232 SERIAL C AT 5 C AT 5 MA TRIX SWIT CH (NOT C ONNEC TED) C onnec ting to the SMT CP-2 f or the rst time WITHOUT DHCP The rst time you c onnec t the SMT CP-2, you will need t o per form the following steps t o set the initial conguration.
23 ww w .smar tavi.com XT A V SPECIFICA TIONS Receiv er with V ideo and Audio support VGA Data F ormat RGBHV , RGsB, YUV , Y/C, CVBS Resolution Up to 1900 x 1200 VGA, SVGA, X GA, SXGA Connector type HD 15 socket Audio Signal T ype Stereo unbalanced Connector 3.
24 ww w .smar tavi.com T echnical Informa tion (continued) XTPr oW ALL VGA Data F romat RGBHV , RGsB, YUV , Y/C, CVBS Resolution Up to 1900 x 1200, VGA, SVGA, XGA, SX GA) Connector T ype HD 15 socket Audio Signal T ype Stero unbalanced Connector 3.5 mm jack socket RS232 DB9M TXD, RXD , Gnd.
25 ww w .smar tavi.com Male to F emale Straight C able (not provided) How to pr operly create an RS-232 connection bet ween a PC and most SmartA VI RS-232 compliant devices 1. Connect a straight thr ough male to f emale RS -232 cable (shown on right) to the RS-232 connector on the PC.
26 ww w .smar tavi.com How to pr operly test an RS-232 connec tion between a PC and most Smar tA VI RS -232 compliant devices After y ou hav e established a connection to your de vice use the follo wi.
27 ww w .smar tavi.com How to pr operly test an RS-232 connec tion between a PC and most Smar tA VI RS -232 compliant devices .
28 ww w .smar tavi.com Operation C omma nd Hexidecimal V alue The f ollowing are example c ommands for the rst 8 inputs and 8 outputs. The hexadecimal v alues of the commands are also listed .
29 ww w .smar tavi.com How to pr operly test an RS-232 connec tion between a PC and most Smar tA VI RS -232 compliant devices input_1_output_6 / / F 0 0 M 0 6 I 0 1 <CHK> <CR> 2F 2F 46 30 .
30 ww w .smar tavi.com How to pr operly test an RS-232 connec tion between a PC and most Smar tA VI RS -232 compliant devices RS-232 SPECIFICA TION.
31 ww w .smar tavi.com Limited W arranty Statement A. Extent of limited warranty 1. Smar tA VI T echnologies, Inc. w arrants to the end-user customers that the SmartA VI product specied above will be free from def ects in materials and work manship for the duration of 1 y ear , which duration begins on the dat e of purchase by the cust omer .
ww w .smar tavi.com © C opyright 2011 Smar t-A VI, All Rights Reser ved NO TICE The inf ormation cont ained in this document is subj ec t to change without notice .
An important point after buying a device Smart-AVI CSW16X16S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smart-AVI CSW16X16S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smart-AVI CSW16X16S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smart-AVI CSW16X16S you will learn all the available features of the product, as well as information on its operation. The information that you get Smart-AVI CSW16X16S will certainly help you make a decision on the purchase.
If you already are a holder of Smart-AVI CSW16X16S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smart-AVI CSW16X16S.
However, one of the most important roles played by the user manual is to help in solving problems with Smart-AVI CSW16X16S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smart-AVI CSW16X16S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
