Instruction/ maintenance manual of the product 1694918 Simplicity
Go to page of 16
A TT A CHMENT OPERA T OR’S MANU AL Clean Sweep T win Catcher Mfg. No. Description 1694918 Clean Sweep Triple Catcher 1732353 Rev. 00 Rev. Date 02/2006 TP 100-4265-00-AT-SMAN Clean Sweep T riple Catc.
.
1 Normal Remov al & Installation Collector Installation ......................................10 Collector Remov al .........................................11 NOTE: In these instructions, “left” and “right” are referred to as seen from the operating position.
2 Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The trian- gle in text signifies important cautions or warnings which must be followed.
Bef ore Operation Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, the grass catcher is likely to become plugged.
Initial Installation 4 Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, and disconnect the spark plug wire(s). W ARNING Figure 1. Install Spacer (left side shown) A. Speed Nut, 5/16-18 B. Threaded Side C.
5 T ube Component Assembly Baffle Installation 1. Determine which baffle to use. See Figure 3 Chart. 2. Lift side discharge chute (H, Figure 3). 3. Insert baffle (F) through discharge opening and posi- tion baffle into place. 4. Tighten carriage bolts (A) and nuts (E) on baffle (F).
6 Baffle Installation Figure 5. Lower Chute to Boot Installation A. Pin, Latch B. Carriage Bolt, 1/4-20 x 5/8 C. Locknut, 1/4-20 D. Lower Chute E. Locknut, Center Lock, 5/16-18 F. Strap, Rubber G. Locknuts, Whiz Lock, 5/16-18 H. Rod, Boot Mount I. Capscrew, Hex Head, 5/16-18 x 1-1/4 J.
Install Latch & Hinge 7 Figure 7. Install Latch & Hinge to Cover Assembly A. Cover Assembly B. Latch C. Locknuts, ESNA, #10-24 D. Screws, #10-24 x 5/8 E. Hinge F. Locknuts, 1/4-20 G. Screws, Slotted, 1/4-20 x 1/2 Figure 8. Install Channel Assembly A.
Initial Hitch & T ube Installation 8 A Figure 11. Install Cover to Channel Assembly A. Cover B. Pin C. Hair Pin D. Channel Assembly C C B Figure 10. Install Tubes and End Caps A. Cross Bar B. Tubes C. Capscrews, 5/16-18 x 2 D. Locknuts, Center Lock, 5/16-18 E.
9 T ube Installation C D E A B Figure 14. Install Lower Tube A. Lower Chute Rod B. Mounting Plate C. Rubber Strap D. Discharge Deflector E. Locknut LOWER TUBE INSTALLATION 1. Lift discharge deflector up (D, Figure 14). 2. Insert lower chute rod (A) into mounting plate (B).
Normal Removal & Installation 10 A. Channel Assembly K. Lower Chute Rod B. Cover L. Lower Chute C. Pin M. Pin D. Hitch N. Strap, Middle E. Bag O. Upper Tube F. White Bar P. Ridge G. Nut & Capscrew Q. Ridge Cutout H. Deflector R. Tubes, Bag Support I.
Normal Removal 11 Collector Remov al 1. Unhook strap (N) from pin (M). Slide middle tube into upper tube (O) and remove middle tube (S). Remove upper tube (O) from cover (B). 2. Lift up cover (B) remove and empty bags (E). 3. Unhook strap (I) from locknut and capscrew (G).
.
.
Simplicity Mfg. Inc.500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.MasseyLawn.com Simplicity Mfg. Inc. - Snapper Products 535 Macon Street McDonough, GA 30253 www.Snapper.com © Copyright 2006 Simplicity Manufacturing, Inc. All Rights Reserved.
An important point after buying a device Simplicity 1694918 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity 1694918 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity 1694918 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity 1694918 you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity 1694918 will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity 1694918, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity 1694918.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity 1694918. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity 1694918 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
