Instruction/ maintenance manual of the product ZT4000 Simplicity
Go to page of 52
Not for Reproduction Parts Manual Rev. 3/2009 ZT4000 Series Zero-Turn Rider & Mower Deck TP 400-7340-M-50-S Mf g . No. Descri p tion 24HP Product 5900707 ZT4000B2444, 24HP B&S Rider w/44" Mower Mf g . No. Descri p tion 26HP Product 5900765 ZT4000B2648, 26HP B&S Rider w/48" Mower 5101297 Part No.
Not for Reproduction.
Not for Reproduction Table Of Content s Torque Specification Chart .... .. .......................... ...................... ............. .. Inside Back Cover PRODUCT COMPONENTS PAGES Main Frame & Front Suspension Group ..........................
Not for Reproduction Main Frame & Front Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301149 The above parts group applies to the following Mfg. Nos.: 4 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Main Frame & Front Suspension Group Footnote s SEAL, GREASE 1 50210 72SM 2 SCREW, 5/16-18 X 1 FLAT HD SC 2 50253 03SM 4 NUT, 5/16-18 HEX NYLO.
Not for Reproduction Rear Bumper & ROPS Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301150 The above parts group applies to the following Mfg. Nos.: 6 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Rear Bumper & ROPS Group Footnote s PLUG, PANEL, 1.25 - BLACK 1 50234 84SM 6 SEAT BELT, RETRACTING - ASSM 2 51001 39SM 1 SCREW, 1/2-13 X 1.00, SHCS 3 51002 67SM 2 MOUNT, SEAT BELT - RH - ORG 4 54008 47C SM 1 PLATE, SEAT BELT ANCHOR - LH - ORG 5 54008 44C SM 1 SPACER, .
Not for Reproduction Engine & PTO Group - 24HP & 26HP Briggs & Stratton NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Engine & PTO Group - 24HP & 26HP Briggs & Stratton Footnote s BOLT, CRANKSHAFT, 7/16X2-3/4, PATCH YZ 1 50476 32SM 1 BOLT, 5/16-18 X 1-3/4 GD5 YZ 2 50250 11X1 4SM 2 NUT, 5/16-18 HEX NYLOCK FLANGE 3 5 02539 2SM 6 WASHER, 5/16" INT.
Not for Reproduction Instrument & Control Panel Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5300813 The above parts group applies to the following Mfg. Nos.: 10 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Instrument & Control Panel Group Footnote s RING, SWITCH RETAINER 1 50222 22SM 1 NUT, 3/8-24 HEX JAM 2 50253 09SM 1 PLUG, .
Not for Reproduction Pump Drive Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301153 The above parts group applies to the following Mfg. Nos.: 12 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Pump Drive Group Footnote s WELD, ARM, PUMP DRIVE IDLER - ORG 1 504643 0CSM 1 BUSHING, BRASS, 1.
Not for Reproduction Motion Control Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301154 The above parts group applies to the following Mfg. Nos.: 14 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Motion Control Group Footnote s ROD, NEUTRAL RETURN 1 51009 47SM 2 SPRING, REVERSE RETURN 2 50226 45SM 2 BUSHING, NYLON 3 50232 60SM 2 BUSHING, FLANGED .375 X .630 X 2.00 4 51009 42SM 2 COLLAR, 3/8" SET 5 50105 46SM 4 WASHER, 3/8 SAE 6 50251 56SM 2 PIN, HAIR, .
Not for Reproduction Motion Control Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301154 The above parts group applies to the following Mfg. Nos.: 16 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Motion Control Group Footnote s WELD, SHAFT MOTION CONTROL-LH-IS500-ORG 45 5402 588CSM 1 WELD, SHAFT MOTION CONTROL-RH-IS500-ORG 46 5402 589CSM 1 SPRING, EXTENSION 4 7 50206 39SM 2 The above parts group applies to the following Mfg.
Not for Reproduction Hydraulic Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5300781 The above parts group applies to the following Mfg. Nos.: 18 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Hydraulic Group Footnote s ADAPTER, HYD. 1 50226 33SM 2 FITTING, #8 JIC - #8 O-RIN G, 45 DEG. 2 502333 8SM 4 ADAPTER, 90 DEG, 9/16-3/8 BARB 3 502.
Not for Reproduction Hydraulic Mount Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301155 The above parts group applies to the following Mfg. Nos.: 20 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Hydraulic Mount Group Footnote s NUT, 1/4-20 HEX NYLOCK FLANGE 1 50253 91SM 4 BOLT, 3/8-16 X 1-1/4 GD5 2 50250 13X1 0SM 2 WASHER, 3/8 SAE 3 50251.
Not for Reproduction Seat Mount & Floor Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301161 The above parts group applies to the following Mfg. Nos.: 22 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Seat Mount & Floor Group Footnote s BUMPER, RUBBER 5/16-18 1 50226 12SM 2 NUT, 5/16-18 HEX NYLOCK FLANGE 2 5 02539 2SM 9 WELD, SEAT PLATE - R.
Not for Reproduction Fuel Tank & Mount Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301151 The above parts group applies to the following Mfg. Nos.: 24 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Fuel Tank & Mount Group Footnote s TANK, FUEL, 1500Z - LH 1 50499 47SM 1 TANK, FENDER, 1500Z - RH 2 504 994 8SM 1 FUEL CAP, 3.
Not for Reproduction Parking Brake Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301156 The above parts group applies to the following Mfg. Nos.: 26 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Parking Brake Group Footnote s BOLT, 5/16-18 X 1-1/8 GD5 1 50250 11X9 SM 1 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) 2 50251 39SM 2 BOLT, 5/16-18 .
Not for Reproduction Rear Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301157 The above parts group applies to the following Mfg. Nos.: 28 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Rear Suspension Group Footnote s WELD, TIE BAR - ORG 1 54040 64C SM 1 WELD, MOTOR MOUNT - LH-IS500-ORG 2 54025 23C SM 1 WELD, MOTOR MOUNT - RH-IS.
Not for Reproduction Deck Lift Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301158 The above parts group applies to the following Mfg. Nos.: 30 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group Footnote s WELD, ROD DECK LIFT 1 5 06152 7CS M 1 GRIP, FO AM 2 50218 80SM 1 SPRING, EXTENSION 3 50206 39SM 1 PIN, CLEVIS, 1/4 X 7/8 4 50252 12X7 SM 1 PIN, HITCH, 1/2 X 2.
Not for Reproduction Deck Lift Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301158 The above parts group applies to the following Mfg. Nos.: 32 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group Footnote s NUT, 3/8-16 HEX 45 5025 034S M 2 WELD, DECK STABILIZER 46 5049 867CSM 2 SHAFT, DECK STABILIZER 47 5049 868SM 2 COLLAR,.
Not for Reproduction Wheel & Tire Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5300784 The above parts group applies to the following Mfg. Nos.: 34 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Wheel & Tire Group Footnote s WHEEL, CASTER, 11X4.0-5 SILVER (Includes Ref Nos 2 & 3) 1 50224 33SS M 2 TIRE, FRONT, 11 X 4.
Not for Reproduction Decals - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301159 The above parts group applies to the following Mfg. Nos.: 36 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Decals - Brand & Model Footnote s DECAL-SIMPLICITY SILVER & BLUE W/ ICON 1 17225 51SM 1 DECAL, BADGE, LH 2 50618 16SM 1 DECAL, BADGE,RH 3.
Not for Reproduction Decals - Safety & Operatio n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301183 The above parts group applies to the following Mfg. Nos.: 38 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. Decals - Safety & Operatio n Footnote s DECAL, MAIN 1 51007 10SM 1 DECAL, DANGER, MOWER 2 510013 6SM 1 DECAL, DANGER, MOWER DISCHARGE 3 5100137S M 1 DECAL, DANGER, FIRE 4 510 0708S M 1 DECAL, THROTTLE CONTROL 5 51002 80SM 1 DECAL, CZT HYDRO RELEASE (Located under seat plate.
Not for Reproduction 44" & 48" Mower Deck Group - Hanger Chains NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5300665 The above parts group applies to the following Mfg. Nos.: 40 2009 Copyright © by Briggs and Strat ton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. 44" & 48" Mower Deck Group - Hanger Chains Footnote s NUT, 1/2-13 HEX 1 50250 38SM 2 WASHER, 1/2 SAE 2 50251 58SM 4 NUT, 1/2-13 HEX.
Not for Reproduction 44" & 48" Mower Deck Group - H ousing, Covers, Spindles & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301160 The above parts group applies to the following Mfg. Nos.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. 44" & 48" Mower Deck Group - H ousing, Covers, Spindles & Blades Footnote s BODY CLIP, 5/16-18 X 1/2 DEEP 1 5022308S M 6 BOLT, .
Not for Reproduction 44" & 48" Mower Deck Group - Pulleys, Belts & Idler Arm NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. 44" & 48" Mower Deck Group - Pulleys, Belts & Idler Arm Footnote s SPACER, .52 X 1.
Not for Reproduction 44" & 48" Mower Deck Gr oup - Rollers & Casters NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. 44" & 48" Mower Deck Gr oup - Rollers & Casters Footnote s NUT, 3/8-16 HEX NYLOCK FLANGE 1 50253 94SM 2 WHEEL- 2.00 WIDE 3.92 DIA 0.531ID POLY (44" MODEL QTY. 2) (48" MODEL QTY.
Not for Reproduction 44" & 48" Mower Deck Group - Striper Roller NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
Not for Reproduction PART NO. DESCRIPTION REF NO. QTY. 44" & 48" Mower Deck Group - Striper Roller Footnote s WELD, MOUNT, STRI PER, LH - ORG 1 540362 2CS M 1 WELD, MOUNT, STRI PER, RH -.
Not for Reproduction.
Not for Reproduction T or que Specification Char t FOR ST ANDARD MACHINE HARDW ARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.
Not for Reproduction 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.c om MANUFACTURING, INC. 2009 Copyright © by Briggs and Stratton Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
An important point after buying a device Simplicity ZT4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity ZT4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity ZT4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity ZT4000 you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity ZT4000 will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity ZT4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity ZT4000.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity ZT4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity ZT4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
